CompTIA CYSA+ CS0-002 – Analyzing Output from Vulnerability Scanners Part 1

1. Scan Reports (OBJ 1.4) Scan reports. In this lesson we’re going to start looking at some scan reports from our different vulnerability assessment tools. Now these scan reports are going to contain colorcoded vulnerabilities in terms of their criticality. This allows you to very quickly identify what is the most important things that need… Read More »

Cisco CCNA 200-301 – Wireless Networking Fundamentals Part 4

8. Switch Configuration for Wireless – Lab Demo Lecture. You’ll see how to configure a switch to support wireless networks with wireless LAN controller, with a lab demo. I’m going to use packet tracer for this demo, so you can see that I’ve got it open here. I’ve got my switch here in the middle.… Read More »

Cisco CCNA 200-301 – Wireless Networking Fundamentals Part 3

6. Wireless Channels and Radio Frequencies In this lecture you’ll learn about RF, that’s radio frequencies and channels. WiFi services operate in the two 4 frequency spectrum that’s allocated for ism industrial, scientific and medical use. You’ll see more about what that means in a second. Because of this, a radio operator’s license is not… Read More »

Cisco CCNA 200-301 – Wireless Networking Fundamentals Part 2

4. Wireless LAN Controllers and CAPWAP In this lecture, you’ll learn about wireless LAN controllers and the Caplap protocol. In a large campus, configuring a large amount of wireless access points individually quickly becomes unmanageable. You can see in the example campus here, I’ve got my first wireless AP, which is configured with the corporate… Read More »

Cisco CCNA 200-301 – Wireless Networking Fundamentals

1. Introduction You’ll learn about wireless network fundamentals. WiFi networks adhere to the IEEE 800 and 211 standards. You’re going to learn all about the different standards and also the terminology surrounding them, also about the different radio frequencies and channels. The different types of wireless networks that are available are either ad hoc, which… Read More »

Cisco CCNA 200-301 – WAN – Wide Area Networks Part 3

7. PPPoE Point to Point Protocol over Ethernet In this lecture, you’ll learn about PPPoE, the point to point protocol over Ethernet. In earlier lectures in the section, you learned about the different Wan options that a large company or large office would use for their Wan and their Internet connectivity. Less expensive options, which… Read More »

Cisco CCNA 200-301 – WAN – Wide Area Networks Part 2

4. WAN Connectivity Options In this lecture you’ll learn about the different Wan connectivity options and there’s multiple wide area network options available. Not all options are going to be available in all locations. It really depends what region, what country you’re in. What is commonly used in one region may be considered legacy in… Read More »

Cisco CCNA 200-301 – WAN – Wide Area Networks

1. Introduction Section, you’ll learn about wide area networks. I remember when I was first learning networking, that how Wan technologies worked in the real world was quite hard to get a handle on. It was hard to learn it from the books. We didn’t have videos back then because my Wan connection was a… Read More »

Cisco CCNA 200-301 – The Security Threat Landscape Part 5

9. Remote Access VPN Virtual Private Networks In this lecture you’ll learn about client to site remote access VPNs with the Cisco Any Connect client. So the Cisco Any Connect client is a remote access VPN application which uses the ASA firewall. You saw in the last lecture when we configured the site to site… Read More »

Cisco CCNA 200-301 – The Security Threat Landscape Part 4

7. TLS Transport Layer Security You’ll learn about firewalls IDs, intrusion detection systems and IPS intrusion prevention systems. So I’ll tell you about the characteristics of each, the differences between them, and how they best work together to provide security for an organization. So starting off with the IDs and the IPS, IDs Transfer Intrusion… Read More »