Pass Your Cisco 642-437 Exam Easy!

Hi all,

may i ask a question for those who took the 642-437 CVoice exam?
is 642-437 CVoice exam come with simulation question?
please advise.
Appreciate if someone can answer me.
Thanks.

Which type of Session Initiation Protocol directory number supports the assignment of up to 10 telephone numbers and up to two active calls?
A. multiple-number directory number (using dual-line ephone-dns)
B. sip-ten-line
C. dec-line
D. multiple-number directory number (using single-line ephone-dns)

which one should be the answer?
SIP doesn't support dual-line, so can't be A.
but how a single-line support 2 active calls?

Additional:
Question about a proprietary protocol that reports any events to the Cisco Unified Communication Manager. my Ans is SCCP.
Show commands to show CUBE Events.
Study also MGCP.

I passed the exam with 899 Score, Thanks Bob by the way it really helps. I used dumps from Keron and This Dumps some Qs is valid. As advice by Bob, Study CUBE, QOS , Number manupulation and Sip., i used the PDF File 642-437 Study Course.
here the additional Question that i have recall.
1. Where you going to issue Address hiding in SIP for CUBE. My Answer is SIP.
2. The command for line coding in T1Cas. ans. Linecode B8ZS
3. Num Epxansion command, for certain numbers.
4. Command to control Bit Rate and bandwidth for RSVP in CUBE.
5. What the numbering plan in North America for Special Purposes. My Ans is Easy Recognized Number not sure for this.
6. Where the LLQ is Base. My Answer is Customized Queuing.
7. DN which support one Voice port and 2 channels. My ans is Dual Lines.
8. Sip Phone configuration, question about DN number 1 tag with 20.
9. other question of sip about Sip Proxy protocol Server. My answer is location server.

Please study more on QOS, SIP, Dial-peers and Cube. I hope it helps.

Thanks Bob for the Idea, ill going to take this tuesday and it Gives a little help. Wow i hope i could passed to, even just score like you.

I just took the test and got my a** kicked by Cisco. They have added a lot of new stuff that I haven't seen in any of the dumps. They hit me hard on QOS today. but I passed with 809. They had a lot of command questions and where they wanted you to know the exact command but only one word was changed. I've taken some other CCNP Voice tests and Cisco didn't even change the order of the answers. This test every single answer was in a different order. Study hard and Good luck to anyone taking this test.

I wish I could have remembered all of the new questions but I was just lucky to get out of there alive. Some of the questions were based on Drag and Drop found in the dumps, Here is what I do remember

How many digits are in a european phone number?
What are H323 commands based off? Q931, Q921, and two other answers
Protocol to use between third party vendors? SIP, MGCP, SCCP and another answer
A question about how to configure this command mls qos map cos-dscp 0 10 18 26 34 46 48 56?
What is the first event SIP Sends out? Trying,Invite,Ringing ACK and one other answer.
Some question about different types of media? Media Termination Point is the only answer that made sense here.
How Many bytes are added to a frame using SRTP? 32, 64 and two other answers
There was a question about adding fax relay to a dial peer and having Cisco setup as secondary.
Something about the time it takes to put bites on a wire? serialatiazion Delay was my answer.
Refer to the exhibit. When 5551234 is being matched with the outgoing dial peer that is shown in the exhibit, which of the following called numbers will be sent to theVoIP network? (THEY REMOVED THE PREFIX 5 from the DIAL PEER. BE CAREFUL HERE)

dial-peer voice 1 voip
destination-pattern 555..
port 0/0/0:23



Hope this HELPS.

@someguy: I'm taking my test tomorrow and seeing your comment you have me a little concerned. You say you need to know the commands. Do they provide you a router sim and you need to type in the questions? I know this information pretty well but Cisco always tries to trick you with subtitle difference. Just trying to make sure I'm prepared for tomorrow. Any feedback would be appreciated.

The drag and drops are the only relevant questions from this dump. the rest has changed. Need to know the commands VERY well to pass now.

Mr.Panjarakuttan we request you update us with new dumps pls..u have done great job by helping us!!! jus bcoz of few morons.don let them affect you

Hi All,
Please don't follow this dump. This dump is expired.
The questions are completely changed.
Today, I failed.

Dont rely too much on this dumps, only 30% - 40% appeared. there are too many new question/s. Today i passed 821/1000

Hi All,
I am planning to take the exam soon (Monday).Appreciate if any one can upload the latest dumps.
Thanks
JFK

I passed with 910, dumps have changed!!!! I have just some old question but I really don't remember the new ones.. maybe afternoon after some rest I will inform some question..

Aerodesliza
God with you . I'll take the exam very soon
please tell me if you found new questions

Do not rely completely on this dump.its changed!! only very few questions are from this dump, many tricky ones as well

For the below message Muruk from India

This dump was not valid for me today when I took the exam, only 50% of the questions were from this dump.Rest were all new ones. Though Passed. :)

Passed test yesterday with a 974. Every question was in this dump

Ivan H from Mexico, it is correct. Learn this dump and You will pass the exam successfully. Good luck in passing this exam

hey guys on my Visual CertExam has shown me 86 questions, it is correct? or it should be more?

thanks

Dump is valid in Ukraine
Pass today with 936

About the Q.47 I think the best answer is D: map the last 4 digits in the DID to the extension number using translation rule
and no need to use auto-attendant her " the dump answer, choice C:".

The answer is C (auto-attendant) because in the exam the DID Range is only 1 number.

Be careful and read well the DID Range

Passed with 961.

This dumps is totally valid.

100% in everything but 86% (Describe the need to implement QoS for voice and video) and 82% (Describe and configure the DiffServ QoS model).

Important: Media packets can either flow through (thus hiding the networks from each other) or around the Cisco Unified Border Element platform.
"
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps5640/prod_qas09186a00801da69b.html
"

Then Media flow through is a method to provide network hiding although doesnt appear like that in cube product spec.

FYI : Had a Question with slight changes in: dial-peer voice 123 pots ( no direct inward dial and no port configuration )

QN 32: Refer to the exhibit. When an inbound PSTN call from 4087071222 arrives at the ISDN port that is shown in the exhibit, which dial peer will be matched for the inbound leg?

!
dial-peer voice 123 pots

incoming called-number 408707122 !

!

dial-peer voice 2123 pots
answer-address 408707122
direct-inward-dial
port 0/0/0:23
!

A. Dial-peer 123, because incoming called-number takes precedence over answer-address.
B. Dial-peer 2123, because answer-address takes precedence over incoming called-number.
C. The matching inbound dial peer will be selected at random.
D. Although dial-peer 123 takes precedence, there is no direct-inward-dial that is configured,
therefore 2123 will be selected.
E. Although dial-peer 123 takes precedence, there is no port that is configured under dial-peer 123, therefore dial-peer 2123 will be selected.

Thank you very much Panjarakuttan.

This Dump is 200 % valid till date. Had 67 questions, all from this dump. I Passed today with 950. I prepared using INE , CBT nuggets videos and this dump.Just read every questions and options very carefully. ( I mean read the questions till the end also go through all the options Questions will look similar at first glance ) Some answers are wrong in this dump. But if you are too nosy to get 1000/1000 go through Implement CUBE & Gateway sections thoroughly.

All the best.

Panjarakuttan, Please come back with your Ninja skills to prepare more valid dumps like this and Share. Peace out :)

961 thist DUMP is still Valid

Dump is valid.. Passed over 960.. Thanks to Panjarakuttan..

Thank god passed with 974/1000..agail all thanks to Mr:panjarakauttan..all dumps are 100% valid

Passed, all questions from this dump. Sorry to lose you Panjarakuttan.

Passed the exam today, 974/1000. Dump stil valid as of this date. Thanks Panjakarakuttan.

Passed the exam today, got 910/1000. Plz concentrate on this dump only, others have conflicting answers. Thanks exam collection..

Thanks Panjarakuttan,

Gave the exam today passed with 976.. All questions from these dumps..

100% valid, and Panjarakuttan I apologize for those who made ungrateful, and nasty remarks. Your past and present work is deeply appreciated and we hope to see you back. We hope you will reconsider and continue to post. keep posting..

Passed today , this dump still Valid , thanks panjarakuttan .
i used those dumps 90Q+86Q+19Q

Panjarakuttan,

Thank you for the work you did, and shared with us. I apologize for those who made pompous, ungrateful, and nasty remarks. Your past and present work is deeply appreciated and we hope to see you back. We hope you will reconsider and continue to post.

May life and career offer you the very best there is to offer.

Thanks Panjarakuttan.
Today i pass the exam 949/1000 with this dump.
Lost marks in QOS, CUBE questions.

Thanks a million VinhPLT !!!

Dear Jaggs
If you follow this dump, you can get good core 950++
This test doesn't have any LAB.
Take care with CUBE.
QoS:
You must choose delay time 0-150ms, not 1-400ms.

Valid. score over 97x
Study carefully about CUBE and QOS

INE
Official student guide
this vce for selftest

to panjarakuttan - thank you!

Hi Panjarakuttan,

Are there any labs or simulations for CVOICE 642-437 because I could not find any lab or sim in your dumps. Please help me out because I am going to give this exam in next week.

Thanks

Dear Panjarakuttan.
Thank you for posting this dump for us.
Hi all
This dump is still valid for you to pass this module.
I have passed this exam this afternoon with score 961.
Most of the answer correct. But some anwer about CUBE is wrong. I got 75% on CUBE.

Alhamdullilah!! Passed with 974! Super valid dumps!!

today i passed with 961, thnks to almighty
and thnks to panjarakuttan, appreciated ur work thnks a lot
only thing is that if anyone want make 1000/1000 he should go through cisco unified border element CUBE. few worng answers are their for CUBE otherwise this dumps is perfect and enough to get 900 plus.

FINALLY,THANK GOD.
TODAY I PASS MY CVOICE (642-437) EXAM GET MARKS 950/1000.
ALL QUESTIONS SAME BUT Some Answers 3 to 5 WRONG..
BUT u Can Get good marks to prepare tis file.
I just only prepare tis vce file.
Cisco.ActualTest.642-437.v2012-04-11.by.Panjarakuttan.86q.vce
((THANKS panjarakuttan))

The Dumps is still vaild. Today I Cleared the exam with the score 961.

Thank you Examcollection Dumps are vaild. Today I Cleared the exam with the score 936. Thank You

Hi Guys these dumps are still valid today 2 hour's ego I passed with score 974.Thanx ton dude thanx examcollection.

Thnks a ton dude passed the exam just now with 936 dumps are still valid

dumps still super valid.... passed today with 943 score..... thnkz panjarakuttan...........

Hi guys The dump is still valid, today I passed 980

the dump is valid,, i passed today with score 961

Gave exam just 2 hours ago all questions from 90Q,86Q,19Q dumps no new question beware some answers are wrong in this dumps!! but good enough to pass got 920

keep update dude, Taking exam in a few more days.
which answer is not valid??

Valid%. But answers are not 100% correct !!!
passed today

Hey ALL! Passed today with 974! All Q in the dump!
Thanks Panjarakuttan!

I'm now looking for 642-481, some with valid dump?

is there any simulations for the exam? am planning to write exam in 2 days.. pls let me know..

Thanks for every one i passed today still valid 890

Guys,
Any of you have a CVOICE Quick Reference Sheets to share

i passed the exam today 926 think Panjarakuttan

i passed the exam today with a score of 936. the dump still valid.
Thanks panjarakuttan

i passed the exam today with a score of 974. all the questions are in this dump.
Thanks panjarakuttan

I passed today with 985, all the questions are in this dump.

i passed the exam today with a score of 961. all the questions are in this dump.

Hi all.
Is this dump and cmt enough to pass this exam.
I'll take exam next week.
Tks for your feed back

Many thanks to examcollection.com and all ppls, who helps us in exam preparation. Passed wth 8XX.

Passed today with 949/1000.

Used Cisco Press Txtbk and this dump as study material. Did not use CBT Nuggets or any other video material.

All questions came from this dump. There were no new questions in exam.

Please take note, the answers in this dump are only 75% valid. I had to do alot of cross-referencing to confirm certain answers. I used the Cisco Press ebook, online documentation, and the 90q and 19q dumps for this. You will not pass if you take every answer at face value.

Thank you very much to panjarakuttan for making this dump available, and to all who added comments to this thread!

@panjarakuttan
Q:Which codec complexity type will offer the greatest number of voice channels, provided that the complexity type is compatible with the particular codecs that are in use?
Your A:flex complexity (is this true?)

check this :
http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_c6.html

Select a higher codec complexity if that is required to support a particular codec or combination of codecs. Select a lower codec complexity to support the greatest number of voice channels, provided that the lower complexity is compatible with the particular codecs in use.

@saad
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps5640/product_data_sheet09186a00801da698.html


Network hiding
• IP network privacy and topology hiding

• IP network security boundary

• Intelligent IP address translation for call media and signaling

• Back-to-back user agent, replacing all SIP-embedded IP addressing

• History information-based topology hiding and call routing

Just passed the exam! :D
Thanks a lot panjarakuttan :)))
Keep posting these great dumps man!

just passed with 974. Thank a lot panjarakuttan :)

Passed with 961, thanks punjara

Don't let them get to you punjara, you do a great job. Don't let them spoil it for us.

@Ali-if u fully concentrate on this dump,at least u will get minimum 974....anyway from today onwards i am not going to post any dumps....good bye....coz of some guys bad response

THANKS.!! panjarakuttan i passed today with 97% these dumps are enough to pass.!! im lookn out for CIPT1 dumps please help.!!

I passed today with 936, using 90Q dump, 108Q and this dump, there are many items has different answer in these three dumps, be careful to choose the correct one, good luck everybody and thanks for this work

Hi,
I passed with 961%, only this dump is enough to pass.

I passed , %100 valid , any different question.

I passed the exam today , I have 910 score alhamdulelah, I MADE A MISTAKE IN calculating the no of available calls ,THE QUESTION HAS AN ADDITIONAL POINT telling u that the header is compressed.

saad from India:
"back-to-back user agent replacing all h.323 embedded ip addressing" is not valid answer, it can be valid if it talking about replacing embedded ip addressing for SIP not "H.323"

Passed 18 May 2012. Dump still valid. Use this and the 19Q one and it should get you through.

Hi panjarakuttan

Q. which three methods are used by a cisco unified border element to provide network hiding? (choose three)

there are two answers conflicting to the question can you suggest which is the correct one

ans1. back-to-back user agent replacing all h.323 embedded ip addressing, ip network security boundary and ip network privacy and topology hiding.

ans2. ip network security boundary, media flow-through and ip network privacy and topology hiding.

can u please suggest which three are correct.

panjarakuttan do you have dumps for CIPT1 ?

* I passed this exam today, this dump is 100% valid.

* Thanks Panjarakuttan.

passed on 15 th with 949.dumps valid.

i use this dump and passed today, with 961.
thanks to all

@panjarakuttan THANK U VERY MUCH

thanks Mr.Panjarakuttan, nice to see you here.

@hi -plz read the comments man......no simulations in this exam

hi, i plan to attend this on tomorrow, is there any lab for this exam.

@mohammed kaleem uddin- no probs.....if u follow this dump u will get 97.4%......

@JAy-u r right dear.....this dump is only 97.4% correct....if u study this.u can easily score 970+.

Hi Ji,
you have only used this or another?
because it seems that there are several questions wrong

hi panjarakuttan.i passed ccna voice using ur dumps (Cisco ActualTest 640-461 v2012-04-29 by Panjarakuttan 82q.vce) 976/1000 thanks. now i want to write cvoice using this dumps let me know if this dumps are enough to take exam please reply

Item 57. the three acceptable values for one way delay, jitter, and packet loss in a VOIP network is:
D, E, F
A is not correct, the acceptable delay is 0-150ms for one way and 400ms will not be acceptable
For international calls, one-way delay up to 300 ms is acceptable

Quality of Service for Voice over IP
http://www.cisco.com/en/US/docs/ios/solutions_docs/qos_solutions/QoSVoIP/QoSVoIP.html

Q.47 I think the best answer is D: map the last 4 digits in the DID to the extension number using translation rule
and no need to use auto-attendant her " the dump answer, choice C:".

Q. 35 the correct answer is F: 51234 .. " D: NULL" in the dump.
http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/dial_peer/dp_confg.html
Digit Stripping and Prefixes
stripping the matching numbers and adding the prefix number to the remaining numbers

today i passed with 974/1000

for me total questions -67
passmark-790

yes gat.i used this dumps..but i gave my own answers..

Dear all who passed this exam please tell us You only used this dump or some other?

panjarakuttan
You only used this dump or some other?

Hello Ste and rafi,
You only used this dump or some other?

Hi, Panjarakuttan, aproved today with 961, 100% in all sections except configure DiffServ Qos model (91%) and implement QoS for voice and video (71%). Many thancks fot your help.

passed yesterday with 974 marks

Hey, This dump is correct? Anybody make test with this dump? is enough to pass?

Q4: Which four types of ephone-dns are supported by SCCP in Cisco Unified Communications Manager Express? (Choose four.)
here you are absolutely right
correct answers are A,B,D,E,F.i think in exam one of this option will not be there.if 5 option is showing u go according to dumps.

oice packets are arriving at a destination with a variance of between 20 and 50 milliseconds. If the jitter buffer has a capacity of 30 milliseconds, what is the impact on the audio at the receivers IP phone?Voice packets are arriving at a destination with a variance of between 20 and 50 milliseconds. If the jitter buffer has a capacity of 30 milliseconds, what is the impact on the audio at the receivers IP phone?

go with B according to dumps.im not yet finished the qos portion

Hi panjarakuttan , a lot of thanks fot clarify me this questions. I don't want to abuse your time, but I have doubts about other answers. If you have a moment I would like to clarify;


Q59: Voice packets are arriving at a destination with a variance of between 20 and 50 milliseconds. If the jitter buffer has a capacity of 30 milliseconds, what is the impact on the audio at the receivers IP phone?Voice packets are arriving at a destination with a variance of between 20 and 50 milliseconds. If the jitter buffer has a capacity of 30 milliseconds, what is the impact on the audio at the receivers IP phone?

Why the correct answer is B (There will be no impact the audio stream because the audio packets are arriving in the jitter buffer window.)?

Q65: What is the function of class-based marking? For the official study book booth answers C (Marking frames or packets sets information in the Layer 2 and Layer 3 headers of a packet so that the frame or packet can be identified and distinguished from other frames or packets in the same traffic flow.) and E (Marking allows network devices to classify a packet or frame, based on a specific traffic descriptor.) are corrects. Is E the "best" correct?

Q4: Which four types of ephone-dns are supported by SCCP in Cisco Unified Communications Manager Express? (Choose four.)

A. single-line
B. dual-line
C. shared-line, nonexclusive
D. two directory numbers with one telephone number
E. dual-number
F. octo-line

For the official study book are corrects A,B,D,E,F. Are five and not four..

A lot of tjanks for yoru time.

@Ste-
ALL THE BEST for your EXAM

@Ste-

QN 33: Refer to the exhibit. When an inbound PSTN call from 4087071222 arrives at the ISDN port that is shown in the exhibit, which dial peer will be matched for the inbound leg?
!
dial-peer voice 123 pots

destination-pattern 408707122 -------focus on this command

direct-inward-dial
port 0/0/0:23
!
!
dial-peer voice 2123 pots
answer-address 408707122
direct-inward-dial
port 0/0/0:23
!
A. Dial-peer 123, because destination-pattern takes precedence over answer-address.
B. Dial-peer 2123, because answer-address takes precedence over destination-pattern.
C. The matching inbound dial peer will be selected at random.
D. Although dial-peer 123 takes precedence, there is no direct-inward-dial that is configured,
therefore 2123 will be selected.
E. Although dial-peer 123 takes precedence, there is no port that is configured under dial-peer
123, therefore dial-peer 2123 will be selected.

here answer is B

the order in which a voice gateway matches inbound calls are
1.incomming called-number
2.answer-address
3.destination pattern
4.port
5.dial-peer 0(default dial-peer)

@Ste-
QN 32: Refer to the exhibit. When an inbound PSTN call from 4087071222 arrives at the ISDN port that is shown in the exhibit, which dial peer will be matched for the inbound leg?
!
dial-peer voice 123 pots

incomming called-number 408707122 -------focus on this command

direct-inward-dial
port 0/0/0:23
!
!
dial-peer voice 2123 pots
answer-address 408707122
direct-inward-dial
port 0/0/0:23
!
A. Dial-peer 123, because incoming called-number takes precedence over answer-address.
B. Dial-peer 2123, because answer-address takes precedence over incoming called-number.
C. The matching inbound dial peer will be selected at random.
D. Although dial-peer 123 takes precedence, there is no direct-inward-dial that is configured,
therefore 2123 will be selected.
E. Although dial-peer 123 takes precedence, there is no port that is configured under dial-peer
123, therefore dial-peer 2123 will be selected.

here answer is A

@Ste-
carefully read the 4 questions.....
1.PSTN
2.VoIP
3.Voice
Q26- Refer to the exhibit. When 5551234 is being matched with the outgoing dial peer that is shown in the exhibit, which of the following called numbers will be sent to the ###PSTN###?

dial-peer voice 1 pots
destination-pattern 555..
prefix 5
port 0/0/0:23

A. 5551234
B. 1234
C. 555
D. Null
E. 5
F. 51234
Answer: F(pSTN means pots dial peer)

Qn28:
Refer to the exhibit. When 5551234 is being matched with the outgoing dial peer that is shown in the exhibit, which of the following called numbers will be sent to the ####Voice network#####?

dial-peer voice 1 pots
destination-pattern 555..
prefix 5
port 0/0/0:23

A. 5551234
B. 1234
C. 555
D. Null
E. 5
F. 51234
Answer: F(voice network means pots/voip dial peer.here also we can go for pots)

Qn29:
Refer to the exhibit. When 5551234 is being matched with the outgoing dial peer that is shown in the exhibit, which of the following called numbers will be sent to the ####VoIP network#####?

dial-peer voice 1 pots
destination-pattern 555..
prefix 5
port 0/0/0:23

A. 5551234
B. 1234
C. 555
D. Null
E. 5
F. 51234
Answer: D(voip network means voip dial peer.here we have pots dial peer.so answer is null)

Qn27:
Refer to the exhibit. When 5551234 is being matched with the outgoing dial peer that is shown in the exhibit, which of the following called numbers will be sent to the ####VoIP network#####?

dial-peer voice 1 voip
destination-pattern 555..
prefix 5
port 0/0/0:23

A. 5551234
B. 1234
C. 555
D. Null
E. 5
F. 51234
Answer: A(voip network means voip dial peer.here we have voip dial peer.in voip dial peer prefix command & all will not work.it will send full digit without striping)

@Ste-
Q40:
In which situation would the trust boundary be located at the access layer?
A. if the endpoints, both IP phones and PCs, are incapable of marking traffic properly(Access layer switches communicate with devices that are beyond the network boundary and within the internal network domain. )
B. if PCs are switched through an IP phone and the IP phone traffic can be trusted to mark both traffic streams properly
C. if the access layer switch cannot trust or re-mark incoming traffic from endpoints properly
D. if there are endpoints that cannot be trusted and connect directly to the distribution layer
Answer: A

@Ste-
Q11-correct answer is
D. The administrator needs to map the last four digits in the DID to the extension numbers using translation rules.

Q13-correct answers are
C. The administrator needs to implement an auto-attendant solution where individual extensions can be dialed.
(compare to D this is more preferable)

D. The administrator needs to map the last four digits in the DID to the extension numbers using translation rules.

@Ste-
Q8-The administrator has added a new ephone-dn and a new ephone to the Cisco Unified Communications Manager Express system, but the new phone will not register with the system. If other phones are operating properly, which of the following should the administrator do first to try to resolve the issue?
A. Reboot the router.
B. Remove the ephone, then re-add the ephone.
C. Verify that the url authentication is configured for the correct authentication URL.
D. Verify that the url services is configured to the correct URL for services.
E. Enter the command no telephony-service, then enter telephony service in global configuration
mode.
F. Enter the command no create cnf-files, then enter create cnf-files under the telephony-service
configuration.
Answer: F(im sure abt this....coz normally on th same scenario we r doing like this.
In order to add a new ephone-dn and a new ephone, you must update the SEP*.conf.xml file by issuing a no create cnf-files and then create cnf-files command. Also, you must reboot the IP Phone units with the reset command.

Hi, Panjarakuttan, I have open the dump with VCE designer, the question number is the sequence. The questions are:

Q8: The administrator has added a new ephone-dn and a new ephone to the Cisco Unified Communications Manager Express system, but the new phone will not register with the system. If other phones are operating properly, which of the following should the administrator do first to try to resolve the issue?

Q11 and 13: Refer to the exhibit. An administrator is migrating a PBX telephony system to an IP Phone solution using a fixed numbering plan. The extension numbers and PSTN DIDs cannot be changed. Which of the following methods can be used in order to reach the individual extensions at Site B when called via the PSTN?

Q26, 28 and 29: Refer to the exhibit. When 5551234 is being matched with the outgoing dial peer that is shown in the exhibit, which of the following called numbers will be sent to the PSTN? In the exhibit there is the diap-peer voice 1 pots command.

Q32 and 33: Refer to the exhibit. When an inbound PSTN call from 4087071222 arrives at the ISDN port that is shown in the exhibit, which dial peer will be matched for the inbound leg?

Q40: In which situation would the trust boundary be located at the access layer?

Many thanks for the help.

@Ste-plz post the exact qstns......coz vce file takes questions randomly

Hi, Panjarakuttan, thanks for the dump. Some doubt about your answer:

Q8: Why is the answer is F and not B?
Q11 and Q13 are identical but with differentes answers.
Q26, 28 and 19 are identical but with differentes answers.
Q32 and Q33 are identical but with differentes answers.
Q40: Why is the answer is A and not B?

Thanks in advantage for your help. I'm going to test may 9th.

Best regards

@gigglez-chck th new dups new drag & qstns r thr.if u want to study,study otherwise ignore it.

if you edit the vce you can search for the question.

Again, there's no point to this VCE unless you added questions or corrected previously incorrect questions, but you havent provided proof youve done either. All you need is the 90q and 19q vce to pass the test.

@gigglez-can u plz post the that full question with answers.

what i posted is latest actual dumps.again I will post verified dumps after my exam.
one more thing, which dump u want to follow is ur decision.

@gigglez-thnks dear.then u do one thing, plz purchase a new dump & share with us.

why do people upload a dump and not say what was changed? This dump looks identical to the 90q dump. I've found one wrong answer:

"Refer to the exhibit.

Choose the correct configuration command set that will allow the gateway in zone BR to register with the gatekeeper at HQ so that the gateway is placed in zone BR."

The answer is C, however it should say "Ipaddr" not "ip address". The 108q dump has "ipaddr" which is correct.

omani-more than enough.out of 86 70 will ask in th exam

is 86Q Enough to pass this exam ?? any one can tell please ?

Passed today, with 949, with this dump .
90Q, and 86Q is still valid, one new question. thanks to voicetut and examcollection!