Pass Your Cisco 640-822 Exam Easy!

Hey everyone I just passed with a 921. Dump is %100 valid. Thought I'd list the questions I received on the test. I'm Listing them according to the question numbers in this dump. 1,7,9,10,18,22,27,39,43,48,57,71,80,81,83,91,94,99,104,107,108,116,119,125,
126,127,134,167,178,185,187,191,193,194,204,207,209,210,212,225,227,233,
237,247,254,263,267,291,293,307,317.
Plus there was a Security Testlet where you needed to identify security problems with a Running Configuration. This is explained on 9tut.com.
Good luck, hope this helps someone who is cramming before the test changes

hi, very recommended dump, i passed totay with 9xx in score, all question are from here
thank you for your help and am ready to any Qs

Highly recommend this dump. I went through it a bunch of times and by the time I sat for the exam it was a piece of cake. If you get any questions wrong, look online for the reason why and make sure you understand it! Also review all the material on 9tut.net for the sims.

this one is better than the newest one from icnd1. What makes this one better is that most, if not all questions/answers are correct. the other one is very sloppy.

this one is semi valid, I had about 10 questions from it. I had all new sims too. none were here or on 9tut. know the concepts andyou'll pass.

CBTNuggets helped greatly as well..if you really want to understand the concepts

This dump is very vaild..I passed with 9XX..along with studying and classes through the college..the exams I downloaded were from passguide, certkey & selftestengine..most question are were on cert, but without studying and knowing the material I wouldn't have did so well..9tut simulations were all on the cert as well..you will pass with all of those with at least 8XX though

Passed today in North East US with 874. About 75 percent from this dump. Sims were clunky and weird. In order to pass I used this dump, cbt nuggets, lots of packet tracer and had to master subnetting.good luck everyone. Thanks to everyone on here!

Can someone help please?

I have been studying from 9tut and I am confused on the Security Testlet Question # 4. There are many opinions about it which makes it difficult to understand.

Can someone please help me with the correct answers?

Thank you

Passed today, 950/1000. Used the Odom Wendall Book, 9Tut.net, and ExamCollection Peyton VCE.

Hey everyone,

Will someone please explain how a router decreases the number of collision domains?.. I downloaded a file that is showing a "router decreases the number of collision domains"... Please explain this..

just took icnd1 test and got an 887/1000. I felt like i knew almost every single question but 3 or 4. Most every single question I was giving is in here. Visit 9tut as well as it really helped me out and i DID see questions from there. Good luck!

It would be a class A. If you borrowed 15 bits from a class B then you would end up with 2^1 - 2 for hosts which gives you 0 hosts. Since borrowing 15 bits would have been give you only 1 host bit. You can't have 1 host bit and still have a subnet. A subnet needs to have a network address, host addresses, and a broadcast address.

ops..

lot of new questions about 10 -14 . and one new simiulater isn't show in 9tu.com


becarefull...

From which ip address class can 15 bits borrowed to create subnets ?

the answer is class A , but I think it should be class B
Can anyone explain it to me?

passed the ICND1 yesterday with score 825. I got a drag and drop i never seen before and 1 sim that wasnt on 9tut. As far as the quesitons , this dump is 100% valid.

This dump is also still valid in the US. I scored well above 900 and this was my primary study tool.

I would say 85% of my test was from this dump and the 9tut questions. I had a few oddballs, but if you are scoring 90% or higher on the practice tests, I think you can feel confident going into the test.

CBTNuggets did a good job with there video series on this test. I highly recommend them (even though they are bit older - 5 years or so).

Also, I want to clear this up for some, because I wasn't sure going in. the test starts you off with a score of 300. Meaning you DO NOT to answer 80.4% of the questions correctly, but more around the 70-72% mark.

Passed today!!! Scored 974.
About 90% of the questions was from this dump.

Passed today with a 937, I would say the majority of the questions came from this exam. There was one sim though I have not seen anywhere about security.

Dump is valid 200%. Passed today. Would have even passed without it :) Just wanted to be sure! Massive thank you to the uploaders!!!!

Question 338.

I came to look for the answer to the very same question - regarding eleventh and fourth subnets . Clearly the given answers are INCORRECT. Going through these dumps is a good practice, but use your own brain as well !!!

Passed!!!!!!!! I'm so relieved.lol..Everyone that is taking the exam please do not remember the answers in the order that they are in on this dump. I scored in the low 900's. This dump was very helpful.I also studied with Packet Tracer and CBT Nuggets. I wish everyone the best of luck. Now on to ICND2!!!

exam A Q.111

the correct anzers should be ,

poe
port seqrity

http://en.wikipedia.org/wiki/Cisco%27s_3_Layered_Model

@Uksomeone thanks for the heads up. I went ahead and recreated the questions on my own so the drag and drops work with the Cert Exam Designer. 2 weeks to go till the ICND1 exam and already started on the ICND2..we'll see..good luck to everybody getting ready to take the test(s)!

Passed today with a score of 987, every question on the exam was on this dump.

@Scott.
The Drag and Drops are not meant to work. Look at the question, Think what the answer may be then click Show Answer to see what it really is.

Fyi, I am yet to come across a question that is wrong.

Passed today with 862. This one is 100%, most of the questions were from here.

none of the drag and drops work in any of the exams..am i doing something wrong or do they just not work? otherwise thanks for the help!

Dump is still very very valid. Passed the exam today with a score of 987/1000. I noticed they added a new simlet into the pool. Make sure you know how to connect via ssh and telnet and what is required to do so.
I prepared for the exam using this dump, reading the official cisco press books, 9tut and PacketTracer.

Good luck.

100% valid scored in the low 900s

Passed day 29 November with the score 887, this dump is very valid ( 85 - 90% ) 9 Tut

Took the ICDN1 test last week and passed easily while sick with a 960. This dump is still 100% valid almost every question came from this dump and the sims all came from 9tut. I would recommend studying these two resources.

Pass today 887 from Egypt study Nuggets & this dump only
from 25-30 questions come from this dump.
any one want contact me on mail.

I`ve just passed ICND1 in Brazil, a lot of questions came from this dump.

The exam was easy, I've studied CBT Nuggets, Sims from 9TUT and this and Daniel's dump.

850/1000

9tut Latest ICND1 Practice Questions . . Just Go To Given Link Below.

http://www.scribd.com/doc/114737287/9tut-ICND1-Practice-Questions

Hi Freesp
Please help me with the answer to this simlet involving discovering security misconfigurations on a switch and a router, such as weak passwords, strong passwords on vty but followed by a no login or a login local command, etc. Can't exactly recall the whole thing :(. But there is a similar simlet (or testlet:P) on 9tut.

Passed just yesterday with 974. Every question was from this dump, apart from 2 questions.

The first one was a Drag and Drop involving WAN. You have {Frame Relay, PSTN, Leased Line and ATM} on the one side and have to match them with {Packet Switched, Cell Switched, Cirquit Switched and Point to Point}.

The Correct answer to this is:

Point to Point --> Leased Line
Cirquit Switched --> PSTN
Packet Switched --> Frame Relay
Cell Switched --> ATM

The other was a simlet involving discovering security misconfigurations on a switch and a router, such as weak passwords, strong passwords on vty but followed by a no login or a login local command, etc. Can't exactly recall the whole thing :(. But there is a similar simlet (or testlet:P) on 9tut.

Woo hoo! Got a 974 today. Thanks to this dump and others on this site, 9 Tut, and hard work! On to ICND2!

I studied from this dump and as of today, about 42-43 questions were from this dump, my advice would be study the material first if you want to understand and go further along this path. Otherwise If you have no time left now, memorizing the dump gives you a pretty good chance of passing also. i got 967/1000

Dump is still valid as of today. 11-19-12. Passed today with 899. I think most of the questions I had are in this dump. I felt that I would pass but wanted to get a feel for the question I would be ask. Like most here say, there are a few small errors in this dump, nothing that will cause you to fail if you truly know most of the material.

@ Freesp

There is a problem with that question. Use the link below to get to the right question.
http://www.9tut.net/icnd1/subnetting

Q145 says that answers A,B,D are the correct. B and D of course are correct, but A says IP of fa0/3 (10.1.3.1) overlaps with network 10.1.1.0/30 (which ranges from 10.1.1.0 to 10.1.1.3). Am I missing something here?

Thx in advance

I will repeat some comments and say, that dump is still valid. Passed yesterday in Russian Federation, Moscow. 925/1000, passed in English language.

This Dump is still 90% valid, Passed today 887.

Just to let you know that this is still valid 85%-90% . I passed today with 900pts. Minimum was 804 pts

Hi Alex the answer is correct because you can have vlan´s in distribution layer not only on access layer with distribution switches that´s why the answer is Layer 3 support an port security. link - http://www.google.pt/imgres?imgurl=http://www.cisco.com/en/US/i/100001-200000/140001-150000/149001-150000/149932.jpg&imgrefurl=http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/nstrct.html&h=316&w=380&sz=29&tbnid=yz0vSvo3Ei8NbM:&tbnh=83&tbnw=100&zoom=1&usg=__TEgQ2KUO0rTrPJqthmoXBGn4YGE=&docid=1FII9R819-41fM&hl=pt-PT&sa=X&ei=dPqeUOS1KI-zhAfD1YHAAg&ved=0CCkQ9QEwAw&dur=609

Hope that helps

1. Which two characteristics describe the access layer of the hierarchical network design model? (choose two)

a. Layer 3 support
b. port security
c. redundant component
d. VLANs
e. PoE
Answer shows A and B. Is that correct?

I think the answers should be B and D. Does anyone else agree or know for sure?

What are two characteristics of segmenting a network with a router? (Choose two.)

A. a router processes data more quickly than switches
B. filtering can occur based on layer 3 information
C. A router decreases the number of collision domains.
D. adding a router to the network decreases latency
E. broadcasts are not forwarded across the router

Answers are C and E, but I think the correct answer is B and E. I only say this because if you go to:

http://www.9tut.com/ccna-basic-questions-2

You can see that question one of the CCNA exam asks the same question, but with a different answer. Does anyone else agree?

Chemo_L and Hameed,

You are both correct. Those are incorrect answers and the ones you both chose are correct. I am positive on this as it's been brought up many times on this forum.

Spotted a possible incorrect question. Need someone to confirm.
Drag and Drop
"PC_1 is exchanging packet with DTP server. Consider packets as they leave from RouterB Fa 0/1 toward RouterA .

So the answer should be the oppisite becuase it's asking from RouterB taward Router A.
Source Mac RouterB
Destination Mac Router A
Source IP FTB server
Destination IP PC_1

Someone confirm please.
Which two commands will display the current ip address and basic layer 1 and layer 2 status of an interface?(choose two)
*router#show version
*router#show ip interface
*router#show protocols
*router#show controllers
*router#show running config

I think answer are show protocols and show IP interface.

This dump is still valid..passed ICND1 today with a score of 925 used this dump, CBT Nuggets, and Cisco ICND1 press book

Passed today with a 937. Every question I got came from this dump.
Studied Wendell Odom, 9tut.net, and this dump.

Thanks used this after I finished the CBT nuggets series and passed today with a 912 definitely would suggest still study so you can know it prior to using the dump

Vaild passed yesterday used this dump 9tut and random youtube videos! Most of the test was straight from 9tut. Good luck to everyone and thanks @Peyton

Alex. Thank you, now it's explains from where IP comes. On my question on left hand side network is 192.0.2.32. Appreciating

Albert, please refer to http://www.9tut.net/icnd1/labsim/ripv2-sim#more-22

It explains why those are the answers.

Alex . Question 337. If you will look left and on left side the Network address is 192.0.2.32 /28 (unease in your question other IP address) so Host range 192.0.2.33 to 192.0.2.46 and broadcast 192.0.2.47.
If Network vould be 192.0.2.128 then yes but in question on left hand side the network is 192.0.2.32 and not 192.0.2.128.
How is possible form network 192.0.2.32 make 2.142 ?
Write me the range of the network 192.0.2.32 please? Appreciating

Question 242 is correct, at least Google. 0.0.0.0 0.0.0.0 means any network and any mask 172.16.2.2 means all your packets will go to . And it is Default route.

Question 338. You are right it is incorrect and thanks. .14 and .30 is first sub net. And they asking E0 eleventh subnet and S0 fourth subnet. Great catch

@Albert,

337 is NOT incorrect, it's on 9tut.net website and everybody agrees it's correct. Last usable address is .142 on that subnet. Looks like you're the one that needs to study harder :-)

@Albert,

I Question 242 and Item number 116 are the same question I was asking about. I was asking someone to confirm whether the answer is A and C which I thought may be wrong.

Now as far as question 338, the question is asking about the 4th and 11th subnet.

192.168.191.14
192.168.191.30

are NOT in the 4th and the 11th subnet. If anyone else can please confirm here, I'm pretty sure this is incorrect. Read the other comments by John and Sherry below, they also agree. In fact, they're the ones that brought it up. My answers seem correct if you read the question correctly. Your explanation said nothing about why those answers provided in the test are correct, in fact made no sense.

Alex: question 338 also is correct. 192.168.191.0 is as network 191.1 is a first host 191.14 is a last host and 191.15 is a broadcast.
The only question i found incorrect is 350 and 337.
350 is asking that RouterB towards RouterA but answere is vice versa.
337 question in 6 th answer 192.0.2.142/28 is wrong just from there is took IP 2.142 I have no idea.

Alex : 242 is correct: it is default route and answer C also is correct.
Question 116 is correct too. 192.168.2.32 is a network 2.33 is a first host, 62 is a last host and 68 is a broadcast address.
You mislead exam takers here.
Please study harder.

The answer is wrong in the dump, I worked out the answer and I found it to be the following.
It asks to not to consider "zero subnet to be usable!".

Hence when I discounted the zero subnet i.e, 192.168.191.0/28

The last host in the 11th subnet comes out to be 192.168.191.190/28

The last host in the 4th subnet comes out to be 192.168.191.78/28

Serry I have the correct answer, figured it out. It's not that hard to do actually. I'll post it when I get home tonight. But can someone please answer my question from below. Please look at question number 242 item number 116 and tell me if that's the correct answer. I don't think that it's the right answer. It's the one about default route and whether it requires the other router to be configured as well so they can communicate with each other. Thank you!!

Alex it probably WILL be on the test. I took an ICND1 class and the instructor went over a very similar, if not the same, question. The answer here is NOT right. Anyone who just took the exam that passed that could weigh into that one and the other question I asked about would be great :-)

For the question John and Sherry were asking about, that's question and item number 338. Can someone confirm if this is even supposed to be on the icnd1? It says OSPF but has nothing to do with OSPF. It's a subnetting question, but how do you explain the answers? Now I'm confused.somehow I don't think this question will be on the exam. But now I don't know for sure. Any help?????

@John and Sherry

That's an OSPF topic, it shouldn't be covered on this exam anyway.

Can someone explain to me a question and whether it's correct or not?

When you open Visual CertExam Designer. Question number 242, ITEM 116 shows a Subt Network with routers A and B.

Refer to exhibit. Which two statements are correct

Diagram appears

RouterB(config)# ip route 0.0.0.0 0.0.0.0 172.16.2.2

Answers are:
A. This is a default Route
C. This will allow any host on 172.16.1.0 network to reach all known destinations beyond RouterA.

I'm pretty sure this is wrong. Answers should be
A and E

When I test this in packet tracer, in order for two network to communicate both need to have the static route applied. One isn't enough because network A does NOT know how to reply back to network B. Can someone PLEASE confirm this. I have asked this several times and nobody seems to know. Thanks!!!!

John, I'm glad you asked that question. I had the same exact one. That answer is definitely not right. They asked about the 11th subnet not the first. Stuff like that frustrates me and makes me wonder about the accuracy of the test.

Also could someone please tell me why one of the answers to q. #87 is A? How does that address overlap? Thanks!

@John, that is an OSPF topic and as far as I know, I'm 99% certain there's no OSPF on the ICND1 exam as it's not covered anywhere on the study materials.

So there is a question in this VCE that is suppose to be a sim. For those that have gone through this, it is the question about a community college with the locations of State, Shore, and Midtown. We are asked to subnet 192.168.191.0 /28. The two interfaces that we will be configuring on the router should receive the eleventh and fourth subnets; using the last IP address of the subnets. The answer shown says that the interface that should get the eleventh subnet actually gets 192.168.191.14 (first subnet) and the other interface got 192.168.191.30 (second subnet).

What am I missing here?

The dump is still valid.. about 90%. but know the basics . i had a new drag and drop question related to WAN technologies. so study well and best of luck.

Does anyone know anything about cisco exam preliminary results . Is is for everyone or for specific suspects (who indulge in malpractices etc)

the dump is valid in ~80%. Passed today with 937

Thanks @Alex

Luckily the question wasn't in my exam today. Passed CCENT with 974, going to CCNA now. Dump is almost 80% valid.

Here's the question off the CCNA exam.

What are some of the advantages of using a router to segment the network? (Choose two)

A. Filtering can occur based on Layer 3 information.
B. Broadcasts are eliminated.
C. Routers generally cost less than switches.
D. Broadcasts are not forwarded across the router.
E. Adding a router to the network decreases latency.

Answers, A and D. I know this is off the CCNA questions, but it's basically the same question reworded. The question is, does a router decrease the number of collision domains? Google says yes it some places, but then again the answer can also be "Filtering can occur based on Layer 3 information".

@Pax and Albert

According to http://www.9tut.com/ccna-basic-questions-2 Filtering can occur based on Layer 3 information.

I don't even see option C (routers decrease the number of collision domains) on the question that 9tut has so I'm not sure now.

Can someone clear this one up for us? It worries me. Do we think the answers should be B and E? Or should we go with the 9tut question and ignore the question on this practice test? Help would be appreciated!!!

Thanks for the response Albert!

I'm searching info about it on Google. The question is a bit tricky in my opinion.

What I think about this is:

* Routers reduce the collision domain (reducing the number of hosts that share a network)
* Routers don't reduce the "number" of collision domains.

I think the question refers to the second option, isn't it?. Hope not having this question tomorrow!!

Pax - I think they are both right, but if it C and E I would go for C and E. In question mansion about 'segmenting with a router' that tells a lot. Its only my opinion.

Hello, is question 114 incorrect???:

2. what are two characteristics of segmenting a network with a router ? ( choose two )

a. a router processes data more quickly than switches.
b. filtering can occur based on layer 3 information .
c. a router decrease the number of collision domains.
d. adding a router to the network decreases latency.
e. broadcasts are not forwarded across the router.

The answers are C and E. Shouldn't be B and E? As far as I know routers increase collision domains (as switches do).

Thanks in advance, I'll take my exam tomorrow.

It's valid and was very helpfull for preparation. Passed 31.11.2012 with 950.

@Alex

My exam had 50 questions.4 hot spots. 3 sims. the rest multiple choice. I passed with a 925. If you study the other sims on 9tut, you will be prepped even for the new implementation question. Thanks examcollection, you guys rock!

@Nate, what was the implementation exam regarding??? How many sims, implementations, hotspots total did you have?

Dump is still 80% valid. Passed 3 hours ago - new implementation sim that I could not find on 9tut or in any of these exams though.

sorry correction - can not go back ant read at later time as on some exams.

Be sure it will drag and drop + real world scenario actual equipment configuration. If you answer question or no you can go back ant read at later time as on some exams.

@: TIM, Did you had ATM type drag and drop questions?

Passed today with 899. This dump is still 60 ~ 70% valid

I don't have the latest VCE Engine. Is there anything new on this exam or do all the other ones cover it for the most part? Let me know! I don't want to miss any topics.also someone said there are ICND2 questions, is this true?

You have to upgrade yours Visual CerExam. I had the same error, but after upgraded my engine worked perfect.

can someone with a good heart can provide me why my vce cant open and it will prompt that something that file is using older version? please please need it one please help.i can open other vce files

Passed yesterday with 987!
I used Todd Lammle's CCENT 7th edition book
CBT nuggets
Cisco packet tracer
I took this dump a few times just for good measure
I would say it's still pretty accurate, but know your WAN technologies!

Passed today with the score 899, this dump is very valid ( 85 - 90% )

Is this Dumb still valid. i need my CCENT 1 Asap

Damn, these exams have A LOT of incorrect answers!!!! Here's another one that someone needs to confirm. Question 317.

Routers 2620 and 2521 need to be swapped, the Local Interface when doing a show CDP Neighbors does not match up with what has been placed in answer. The other two routers 2514 and 2501 are correct, but the 2620 and 2621 do NOT match up with their local interfaces. Please confirm this one as well.

Has nobody verified these exams, some have been out over year..

Question 319 regarding NAT, why is there only 3 answers out of 4? Shouldn't the PC_1 be the "NAT Inside Local"????? As CBT Nuggets and other resources states, the private IP address are NAT Inside Local so I don't understand if they forgot to drag the answer, or if it's supposed to be empty? Please confirm if that question is only supposed to have 3 answers. Thanks!!!

Passed ICND1 yesterday 937/1000 with this dump and 9tut,and cbtnuggets, most 9tut sims were on the test btw so study them and learn the concepts good, don' t just memorize.

Passed with 850 first time. Didn't even look at 9tut or any of the sims on the exam collection study tests. Used passguide, certkey, and selftestengine. passguide is probably the best.

Failed with 800 , news SIMS and they request 3 answers in each of the four questions and take more time , be carefull ,but www.9tut.net , study and a lotof theory ,memorized all the single questions and you will get it , in two weeks I will return ,I need my ICND 1 urgent

hey airmaxvi congrats on passing the exam please inbox me ur digits on allen270@webmail would like to know more abt this taking it in 2weeks tym

Hi guys!
I took the exam yesterday and passed with 964 points.
This dump is valid but about 80-85%. There are couple of new questions which does not appear on this dump.
If you want to pass I would highly recommend CBT Nuggets ICND1, the book from Todd Lammle for CCENT, 9tut.net section for ICND1 where all SIMS are valid and still appear on the exam and of course examcollection.com - very useful site and the best.
Now I am on way to ICND2!
Study Hard and Win Easy!
Good luck!

Hi, Im from the Uk, Im a 15years old girl, and I took the ICND1 Exam today @3pm, and Passed with the Score 850. I Used selftestengine & passguide! Both R 200% VALID.! All the Questions were from those Dumps.! I also used 9tut.net an subnettingquestions.org , Both were a great resource. I thank Exam collections & 9tut. I also used CBT Nuggets.!

Off 2 ICND2 Noww.!
Good Luck for others.! Dnt Wrry And Tke Yur Time! Yu Must Remember Study The Basics And Use The Dumps.!!