Pass Your Cisco 300-206 Exam Easy!

the dump is not valid in Ireland , there were a lots of new questions . I failed exam.

Passed the exam today, still 100% valid.
Got Nat and Botnet labs, in the Nat lab you should click on the ASA icon at the topology to access the cli and do the show xlat command.
Good luck for you all.

Did the exam and passed today. valid exam. done in holland.
would be a huge struggle without this.

did any one pass on December / 160Q dump still valid or not

anyone else pass the exam lately

Passed today, dumps valid 160q.
Lab was NAT and Botnet.
NAT lab is a problem, Putty did not work on admin pc and from ASDM tools->command line interface also did not work for me.

Also in multiple choice question for SYSLOG, on exhibit question it says there are 4 question but I only got 3 question :D funny. Still dumps are more than enough to pass exam. good luck!!!

I am going to take the exam on 3/12/2015,did anyone pass the exam lately?

pass the 160 still vaild

I have just passed few minutes ago - 27/11/2015. The 160q dumps still 100% valid - good luck to everyone else taking the exams

Can any one please let me know if these 160 dumps are still valid?

guys, passed the exam 2 days ago
160q dump is still valid, got nat and botnet lab
you can find this dump on website aiotestking, search for 300-206 v2

Passed exam on November 24, 2015
160q dump still valid, got labs for botnet and Nat
You can search this dump on aiotestking website, 300-206 v2 it's the same as 160q

@Miall Could you please send me the new dumps for 11/23/2015 my email is jbutler1134@gmail.com thanks

Hi All,

Can you guys send me the latest valid dump and 160q dump. thanks

Hi all
the the 160q dump still valid 100%
I passed this exam 14-11-2015
I got 2 Labs; nat/pat and botnet.
becareful of nat/pat no output from show nat or show xlate on the console

Could You send me the valid dump
youssef24eg@yahoo.com

the 160q dump still valid??

Hey guys, on the HTTP inspect LAB. Did you hit on the button "apply" or just hit "ok"? In order to get full marks on this lab... Thanks.

Can anyone confirm the status of 160 Question dump? I hope 160q dump still valid. Thank you !

@ALL, ATTENTION PLEASE!

Those who have left the valid E-mail address, please note check your inbox!

I have sent some new 300-206 exam questions and answers to you!

Good Luck for Passing!

I passed this exam today.I studied 160 question dumps got from actual test.Let me know if anyone needs help
Pls email at yazirmk5@gmail.com

Hi every body can confirm status this dump, I hope 160q dump still valid, I have plan to take the exam next week. Thanks

Dears,
This dump isn't available I pass today by stady this dump and other dump.if you want any help sent to me at this email
M.aboelenein89@Gmail.Com

Hi,
I read in few forums that the questions for 300-206 has changed and that the new dumps have 180 questions.
Am I right? If so, if anyone has the new dumps, could you pls mail me at ccnpsec20x@gmail.com

Thanks in advance.

Hi Folks,
Is 160 Q Dump File still valid?
Thanks,
john

Hello Everyone,

Could someone share with me a valid exam questions for Cisco 300-206 & 300-209 with a valid VCE Simulator for windows?

appreciate if you could send it to me on almosawi@itteam.org.

Many Thanks in advance

Hi guys, could you send me the best dump?

Hey all,
Has anyone done this exam recently. I want to do the exam early this next week. I would appreciate if someone would send me the dump. my email is amuhuthia@gmail.com

Dears , What a bout 160 Q File
is it Valid or not ???
Please Help Me
Thanks & Best Regards

160Q is the premium you need to pay for and is valid just passed 22 Oct with 947/1000

Jos can you share if the simulations were diferent as well and if yes what were they about?
Thanks

just did 300-206 exam today. this dump is not valid anymore, majority of the question has changed.

Right confused.com.....this download give 108 q but you all refer to the 160 q dumps as being valid? Which dump is the valid 160Q one?
If anybody has it can you please emil it over to : my03altimaisblue@gmail.com

Hi all can someone send me the latest version for this exam on venelopy.vivs@gmail.com

This is a 108q vce, where can i find the 160q you guys keep talking it's up to date?
Can anyone send it to my email please?
hhmpalma@sapo.pt

Thanks in advance.

hey, when you guys say 160q is it the acutaltests 160q pdf document? Please confirm. I plan to take test in 10 days.

Hi all, can anyone please tell me wich VCE player version to use in order to open this file?

Thanks in advance

Hi ALL! Can you explaine: why when i download i got only 108Q&A instead of 160Q&A? Please give me correct 160Q&A/// on my e-mail:borikadze@gmail.com

Hi,

someone can share me latest dump @ rashyasvm@gmail.com

hi every one

any body did the exam . tell me if this dump still vaild or not Q160 i will take the exam tomorrrrrrow

160 is valid. Passed today oct 16.

I Passed the exam on oct 13, 2015;dump is still valid;

The 160Q dump still valid!
Let's take the exam asap!

I have passed the exam 300-206 at 13 oct 2015 with total score of 871 and the passing score is 847;
the dump is still valid; I got 3 Labs; nat/pat and botnet and syslog lab
becareful of nat/pat no output from show nat or show xlate on the console

Hi Everyone, can anyone send me the 160Q dumps to ImmortalTam@gmail.com

Thanks kindly.

160q dump calid in the Netherlands. I scored 961 points on 07.10.15

can anyone please send me 160Q dumps on my email djosswill@yahoo.fr
Thank

can anyone please send me 160Q dumps on my email attapornbtc@gmail.com
Thank

Hey Guys...could someone send the exam questions to attapornbtc@gmail.com Please....
thanks in advance!!!

The vce 160q is valid, I have passed the exam today with 910 score, I was not able to see the output for botnet lab

Hey Guys...could someone send me the 160Q dumps to bijugems@gmail.com questions

Hi every body can confirm status this dump, I hope 160q dump still valid, I have plan to take the exam next week. Thanks!

can anyone please send me 160Q dumps on my email amravat@hotmail.com

is 160q dump still valid guys ? i have my exam in 10 days

Hey Guys...could someone send the exam questions to rnsguy@gmail.com
thanks in advance!!!

any update regarding this dump ??

Hi from Australia
I did the exam on Friday cleared with 920 out of 100. All the question came from 160q and it's 100% valid. Simulations were NAT/PAT, Botnet configuration and some questions about SNMP. Thanks guys. Here comments were very helpful. All the best.

Passed on sunday, 160 q dumps are valid. Most of the questions were from cisco security manager and labs were nat/ pat and Botnet.

passed yesterday with score 950, dump 300-206.vce file 160 questions is 100% valid including the labs. labs was NAT with PAT and Botnet. Labs is very easy using ASDM i didn't study any lab and i solved it .
i have the valid dump in PDF and VCE if anyone interested send an email to eng.kareem20@hotmail.com .

@Ahmed G. Abdelghany: please what kind of lab should i be expecting i have exam in 5 days time and the dumps i bought has no lab nor hotspot....everyone please kindly assist

Could somebody confirm the validity of the new Cisco.Dump.300-206.v2015-08-30.by.MSB.150q.vce file?

If anyone is intrested in any cisco exams send me an email on ajayce792@gmail.com

I have pdfs available

Peace upon you brothers & sisters

I have passed the exam code 300-206 at 10 Sept 2015 with total score of 974, please find below these important points for your reference:

- The premium VCE file exam code 300-206 is 100% valid.
- The number of questions in my exam was 62
- The passing score of this exam is 84x approximately, and out of 1000 for sure.
- The configurations saving is disabled in the exam labs but you should do just fine, configure your devices as requested in the question and leave a comment that the configurations are not be able to be saved.
- Study hard since the questions and the labs are covering each point of this course.
- One more time and repeating, do not use any exam except the premium one. It is very helpful and very useful.

May god be with all of you.

Cleared the exam 910/1000! 300-206 Premium VCE File 160q Valid as of 9-9-2015! Got 2 Labs, NAT/PAT and Botnet. @PAT lab, Show nat, show xlate dont show my nat statistics. i dont know why, maybe a bug in the exam. Goodluck guys!

Is this dump still valid as of 9-15? Thanks.

Passed on 06/09/2015, 160 dump valid 100%.

Premium dump is valid 1/9/2015

Has anyone passed this exam recently? I'll take the exam early. Thank you for your response!

Do anyone pass this exam using premium dump? Thank you?

I took this exam this morning. 108q vce is a little outdated. Missing new questions. The premium one 160q is more up to date. Google "300 206 160q"

Is this dump still correct? I'll take it in 3 days later. Appreciate your response :)

Hi Leny and Rafaga, could you confirm if the LABS on the exam are the same with the premium vce file? Are the answers the same? Appreciate your response. Thank you.

Hi guys! How can we practice the lab for this exam? I couldn't find ASDM on the internet to install it. Appreciate any help! Thanks

ok lenny, what about Carol's dump w/108q?? Do you know if that dump is still valid?

160q is valid, pass on 8/17

is this dump still valid? planning ongoing the exam this month end.

Its really hard studying for this exam especially since no book is out there yet.

the premium file still valid, 95x!!
take care of the botnet exam and also the passing score is 846!

you have to get 160 in order to pass ther is no way to pass with out it, or you cha serch it in youtube!

The dump is not valid anymore.. There are 20% of the questions in the exam

20% of the questions are in the exam. Not valid anymore

Hi All please let me know is this dump valid Cisco.Certkiller.300-206.v2014-08-18.by.CAROL.108q.vce, i am planning to write this certification

I have exam in 10 Days.

Can anyone send me new Dump Please ??

Thank You Very much !

Passed the exam today with the 160Q. The 160Q is Valid
Got 910.

Thanks

I didn't fully get your point Mako.I think 160q premium vce file is created by adding more new questions to an old 108 q.vce 161q dump and it seem to be the same one wich sell pass4sure.It is only my assumption.Dou you think 161 q dump is valid now?

Hi all,

i'm quite sure that the 160 q dump is referred to 300-206.vce - ExamCollection Verified - Instant Download
160 Questions & Answers that you must buy and not to 108q by CAROL. btw i have actual test and now i have a dump with 161 q, taht are the same i faced the first time when i failed.

Hello guys, has the dumps being changed again? can some one assists with the latest dump for this exam, am about to write this exam tomorrow

Is this dump valid? I tried to find 300-206 dump on Pass4sure and testking website but did not get any dump for Cisco. Is someone aware of this?

New q
What are two high-level task areas in a Cisco Prime Infrastructure life-cycle workflow? (Choose two.)
What are three ways to add devices in Cisco Prime Infrastructure? (Choose three.)
Which statement about Cisco Security Manager form factors is true?
Which Cisco Security Manager form factor is recommended for deployments with fewer than 25 devices?

New q.
At which layer does MACsec provide encryption?
What are two enhancements of SSHv2 over SSHv1? (Choose two.)
What is the result of the default ip ssh server authenticate user command?
Which Cisco TrustSec role does a Cisco ASA firewall serve within an identity architecture?

Request to confirm is this dump valid or not ?

The source of the 160Q dump is the Premium file listed above for purchase...

Any dump soon? We've been waiting for a month:)

@RitaLukak_Southsudan: Please let us know the source of 160q dump. Thank You

@ritu-lukak: Which dump are you referring to?

Dump are 100% valid-160 Questions ...just passed
wrote from India

Will there be a new valid dump any time soon?

@tdr-206 and DAI please provide more questions that u recall. I am also writing soon. What exactly was wanted on the labs.

@tdr-206 please give us more questions you got in your exam since there is valid VCE out now.

@tdr-206: do you remember any other questions apart from the ones posted here? It would really help me if you can post the questions here

passed today with 884 :)
I got all the new questions posted in this thread. Thanks all for posting.

@DAI - got 3 q in the syslog. The first one looked tricky: why doesn't the syslog server receive logs ... I went for: there are no syslog messages to be received.

@gigi: what are your answers to the syslog Lab?

Passed today with 900

Lots of new questions, this dump helped but it's not enough. The labs are simle but the syslog one may be a bit tricky.

Few questions i remember:
Recomnded Security Manager to manage 25 hosts.
How many bridge groups on a firewall in transparent mode?
What can you manage FWSM with?
Prime lifecycle workflow.
How can you see the timeline in a cisco firewall data path?

Hi,

my questions:
default RBAC views (not user)
2x unified ACLs (one question display an ipv4 and ipv6 acl - answer: unified, other questions ask about ipv4 and ipv6 in one acl - answer: unified ACLs)
one HTTP regex question (regex shown, describe what is does)

I vaguely remember some questions:

1. what happens when portfast is disabled and bpdu-filter is enabled?

2.How are log messages sent from multiple context? (This may not be the correct way in which the question was put in exam)

3. How is traffic routed to management on multiple mode devices?

and can someone tell me the answer to the syslog server question? Let's try to pool up the questions

@sam, can you remember more questions?

one of the questions was about RBAC and default users (i think users, not views was the word used)

With the possible answers:
root
cli
super
superadmin
admin
maybe more ...

i also remember some questions:

1. which command uses packet caputure and trance in conjunction?

caputure trace interface ....

2. Traffic between same security level...
yous should be know the difference between "same-security-traffic permit inter-interface" and "same-security-traffic permit intra-interface"

3. Which Port you can use for secure logging?
TCP/1500

4. descripe output of "show snmp engineID"

5. Default interface for failover config on ASAv?
gig 0/8

plase share your experience!

some more questions - please keep it up:

1. name of object group for portocols and ports:
service group

2.asa failover requirments

3. trustsec on asa acts in which role
-> policy enforcement point

4. name of nat type if server exposed from dmz to public
static nat / static pat

5. csm - std. vs professional which one for 25 devices?

6. differences between ssh 1.0 and 2.0

I remember some questions.

1.which ports should be open between csm client and csm server?
Ans: if you are not using SSL, open http://SecManServer:1741

•If you are using SSL, open https://SecManServer:443

2.two commands to configure net flow on an interface?

3.botnet filter-- optional actions? must do actions? like dhcp snooping, dld database

4.fwsm can be managed only by csm professional and ucs service bundle

5.what does dnssec do?

6.default logging level of acl on asa?
Ans: When the log keyword is specified, the default level for system log message 106100 is 6 (informational), and the default interval is 300 seconds.


Can anyone post other questions if you happen to remember?

@ted: it was bpdu filter, not guard. And indeed it applies only to portfast enabled interfaces but it blocks sending and receiving bpdus.

Any other questions you guys remember?

Hi guys, I failed yesterday.
The labs I got was Botnet, PAT and SNMP, I got a regex question that felt like a lab but it was just one question.
The botnet lab and PAT lab is straight forward at lest i thought, the config wasn't showing up in the ASA, I was unsure with SNMP sim.
If I remember exact questions or specific parts of the labs I'll post them but I can say this dump is invalid, I got about 7 questions from this dump

Any new news concerning this exam any one who have done this exam recently can share with us questions hints and lab hints? any command line question? your assistance will be appreciated

The bpduguard one is just checking that you realise that a global bpduguard default only applies to interfaces with portfast enabled. Remember that, and that bpduguard filters against packets RECEIVED and you'll get it.

ASA failover requirements are easily revised but I wasn't sure whether 'same software versions' was the right answer given that failover between boxes on different minor versions is possible (and recommended for upgrades) but definitely not generally recommended. The working of the question didn't make it clear at all.

failed last Thursday,
dumps are not valid, the labs for for botnet I skipped cause of time, syslog and dynamic PAT which worked for me fine as the trick you have to choose dynamic PAT (Hide) option this will work and appear in the show nat output.

Failed today with 751, didn't see the lab with the syslog, maybe I skipped it by mistake?

Anyone that remembers questions can post them?

One was: if you enable bpdu filter globally what happens. Another about failover, which modes,software requirements

cat, do you remember any of the questions?

Can you post them? Even without the answers.

@LV - ASDM.
@cat - labs should not have been a problem but I had to give up on the Dynamic PAT one - I just couldn't get the NAT configuration to take (no output from show nat or show xlate on the console) even though it said it was sending the commands over.
Did you go into advanced and try to set the source and destination interfaces? I wasn't sure as the question specifically said to allow it from inside to outside.

Thanks for the information cat, do you know any questions or the difficult questions?

not valid, failed with 695, needed a 846 to pass. about 10 questions from this dump. I attended Cisco Live in San Diego, still here. I even took the prep class and lab class for 300-206. total of 8 hrs today learning & preparing for the exam at the conference. Which ended up worthless. labs weren't an issue. just the normal multiple choice questions screwed me.3 labs - Botnet Filter & Dynamic PAT; a multiple choice lab on syslog which was messed up, lab said answer 4 questions, only 3 were given, I told the lab monitor lady about it. she said she would make a note of it. luckily it was free as it was included in the purchase of attending Cisco Live.

@Ted, it is happen to me as well. After configured NAT under a object, automatic NAT Rule ain't appear in NAT Section but can check via console.

ted, GUI/ASDM or cli?

LABS:
Set up and test botnet filter;
Set up and test Dynamic(PAT) translation for internal network;
Answer some questions on syslog setup:
- why is syslog server not receiving anything?
- what happens to data traffic if the syslog server is unavailable?
- two others...

Looking for new LAB questions? Anyone who took the test can provide the questions

Thanks in advance

is this valid or not?

Any chance someone will post new questions?

About 10% valid - failed yesterday. Three labs were dynamic PAT (and although I created the network object with dynamic PAT enabled and applied it, the automatic rule never appeared in the GUI. Anyone else get it to work?), botnet filter and syslog questions (didn't get the first syslog question either I think).

Can you give us more details regarding the new ASA lab questions?

VCE is no longer valid. Today I failed the test

Update questions,please

dump is not valid anymore! only 10-20% questions from this dump. study hard for csm, cisco prime, unified acls, logging, snmp, asav, asa operation modes, asa packet-tracer + capturing, asa policy- and class-maps, ipv6 security. new version is much harder and as other already mentioned, fully loaded with new sims.

Failed yesterday . Dumps are not valid

please can anyone else confirm the validity of this exam?

Dump is not valid anymore,failed today,3 ASA GUI labs,Dynamic PAT,Bootnet,Syslog..

is this dump still valid?

10% valid , failed exam
Labs are Dynamic PAT, DHCP snooping, Botnet Filter and SYSlog server.

it is not a valid. i failed today. Question were out of dumps

Guys,please tell me, dump valid or no?

is the dump valid or not?

Today Failed with 780. Only 10% is valid
Labs are Dynamic PAT, DHCP snooping, Botnet Filter and SYSlog server.

Took May27. Lots of new questions, and new labs. Roughly 50% Qs from this dump.

hi Guys...... I have cleared this exam today..... dumps are still valid.

Best of luck for all

Still valid..Cleared exam today :-)

This dump is still valid. Passed exam with 957 on 15th May

Hi everyone, passed yesterday with score 989 . All 70 questions was from dump

I passed today, Exam is still valid

Hi,

It is this exam 1 lab question only Q69?

Passed the exam on 15th May with a score of 950. 100% valid .. same lab

Hi,

Congratulations for all those who cleared this exam. I need some help
I am unable to view the lab questions and the options. could someone help by posting it here

please?

Question 45- option A?
Q 69 and 106, 107 and 108- I am unable to view the lab questions or its options. Could someone please post it here?

Thanks

Hi All,

Is this exam got any lab question? and how many if got?

AssalamuAlaikum....
Request to all friends
My dears friends i want to give (300-206) paper
on 25 May 2015.
Any one send me his Mobile number
that pass paper in 2015.

Great Day

Thanks for this Dump.I passed yesterday with 974 score. This is still 100% valid. All 70 questions i had came from here. I used this and CBT nuggets for my studies.

Thanks Again all for the great work on this dump

guys all the 108 questions on this dump are the ones they choose from?

Why do we have to delete http-inspect-map at the end?

hay Team.... we hv to delete the hhtp-inspect-map at d end of simulation ?

Still valid. I pasa toda y 946

ur welcome @jay.....just passed the exam....100% valid

this dump is valid 100% thank you

Hi Guys
What is the full answer for Q45. it says A and D. But option "A" has the question repeated.


Also what is the correct answer for Q49

Great Day bhagath

Thanks for the awesome help. You a superstar :-)

Very Much Appreciated :-)

hi jay....for Qn5 the answer is D , not A...
Explanation: object-group command is used to create a new group only...but to group individual object groups into one in another..we alway use group-object comand.....check the below example:
Create network object groups for privileged users from various departments by entering the following
commands:
hostname (config)# object-group network eng
hostname (config-network)# network-object host 10.1.1.5
hostname (config-network)# network-object host 10.1.1.9
hostname (config-network)# network-object host 10.1.1.89
hostname (config)# object-group network hr
hostname (config-network)# network-object host 10.1.2.8
hostname (config-network)# network-object host 10.1.2.12
hostname (config)# object-group network finance
hostname (config-network)# network-object host 10.1.4.89
hostname (config-network)# network-object host 10.1.4.100
You then nest all three groups together as follows:
hostname (config)# object-group network admin
hostname (config-network)# group-object eng
hostname (config-network)# group-object hr
hostname (config-network)# group-object finance

Pass today from SG
Still valid

I think the correct answer for Q71 - A (object-group)
I think the correct answer for Q5 - A (object-group)


Please advise

It's valid 100% I passed today

pass today with score 978 the dump is still valid.my advice read the questions of the exam carefully and the answers also , cause the answers are not in order as the dump

had this yesterday in Sg. 100% valid. passed .

Passed on Friday 25-4-2015 dumps are still valid.

valid dump passed today 978 in jordan

Guys is this dumb valid 100%
or there are new questions ?

Hello All,
Do we have ant drag and drops questions in this exam?
Thanks in advance.

Pass on 15/4/2015 score 931
Still valid all from this dump

pass today wid 957.. dump is valid..all d best guys.

Passed 989 score

Passed today with 989 marks, Dumps still valid, quick note on the simulation do not enable logging on on First Page , enable it only on Response Page.

-Passed today with 9xx score
-Still vaild
-No new question or sim
Good luck

Exam cleared today with 925. Dump exactly same.

hay BOB.... we hv to delete the hhtp-inspect-map at d end of simulation ?

Hi all I got it this day
Passing Score: 846
My Score: 957/1000
Grade: Pass
Validity: Still valide at this day
Us an Advice:
Red any question minimum twin every question before reply.
For the simulation question are exactly the same, but explore the all ASDM interface.
I have mistake the last step de Simulation I forget delete the "http-inspect-map" as explain "Abhijeet Salvi" of India in his comment of Mar 19, 2015.
Good Look for all the other.

hey guys. I passed today with 936/1000.
passing score is 846.
passed with 108 questions.
dumps still valid. very easy.

Hello everybody, this dump is still valid, I passed the exam today (980/1000) at 9:30 am.
The minimum passing score is 846/1000.

good luck all!

Hello guys
Can anyone confirm if this version of dump is still valid?

any 1 hv lab asdm video of dis exam plz post...

the passing score should be 800/1000

anyone passed this exam can confirm if it has a simulation that you configure yourself? switching security , AAA or routing etc,,
any questions other than the firewall GUI simlet?

Need VCE file. How would I get?

plz any1 tell me d passing score for 300-206 exam

hi, who can give me a vce exam simulator that can run this exam

Sorry guys for that comment, the exam i pass was CCNA Security.300-206 i am under preparation.

Still valid. Passed today.
Thanks

Dear Abdis hakour,

i have tomorrow 9 am exam kindly can u update me if any one practical lab is coming or not.

Regards
Shad

passed yesterday with score of 989/1000, Christine dumps is still. two new questions.
.In an IPsec VPN, what determination does the access list make about VPN traffi?
.On which Cisco Configuration Professional screen do you enable AAA?
good luck guys.

Still valid, passed today 😊

Hi..
Just wanted to update that if you want to delete the http-inspect-map which you have created, go to "objects-->Inspect Maps--->http---->select the http-inspect-map--->delete".
But make sure that the "http-inspect-map" is not selected in the steps which we have used to create it or else it will not allow to delete it...Cheers Guys...

JIM: I think the log should be set to disable, not enable like it is in the screenshot.

Q49 is wrong. Should be A and D.

I noticed in the http simulation the instructions say to drop http connections with protocol violations and drop & log http connections when the content type doesn't match one of the supported mime types. The explanation shows drop & log for both. Any comments?

This is authenticate. 985/1000, don't memorize where they are but know the correct answers. Almost exact even down to the labs and snmp.

Passed Yesterday still valid

Passed today 960. USA

still valid passed today
thnx 4 ur efforts.!

Still valid, passed few days ago.

still valid