Pass Your Cisco 400-101 Exam Easy!

Please help me to confirm whether this dump is cover to take exam or not?

I see it's not a big deal to pass written exam. But my question is, how to prepare myself for the lab exam? And how to pass it?

I see it's not a big deal to pass written exam. But my question is, how to prepare myself for the lab exam? And how to pass it?

Dear All,

Any one can help me with VCE Exam Simulator. I downloaded sveral from different sources and i downloaded this file 400-101 to use it in the VCE gave me a message your VCE is older try to download new, please if you have please share with me the link.

Thanks & Advance,

Dear,

Can you please send the link from where i can download free VCE ExamCert 4.2.0 or latest one.

I really need it.

@rr is 288Q dump is valid?

@Ciscothegr8 : Is 288q valid?

@Ciscothegr8 where you uploaded the file? pl share,thanks

@rr : Is 288q valid? Did you challenge the exam again?

Guys I have uploaded new (updated) vce file today.

Thanks Guys, I have planned to take on sep 27th.After seeing below comments,reschluded my exam to Oct 27th.Please keep us posted about new dumps.

@rr: saw ur post on carriercert. Not sure if 288q dump is valid or not. Downloaded the trial version of the same and it had all the old qustn(10 questns). Keep us posted.

@DeadMan: I can't reschedule my exam ccnp is going expire on 2nd of October.
Got new dumps from p4s with 288q, hopefully they are valid. will keep you posted how i go

Why the hell do people keep asking if this dump is valid when the previous 20 posts dating back to 19th September clearly say all the questions have changed and that the dump is no longer valid.

THIS DUMP IS NOW WORTHLESS SO STOP ASKING IF IT IS VALID. WAIT FOR A NEW DUMP.

@rr: Failed miserably on 24th Sept. Nearly all the questions were new. Reschedule your exam. Need new dumps.

@DeadMan: how did you go with your exam on 24th Sept?
Is this still valid dumps? Thanks.

Failed today.... 739/1000
Dump not valid
95% new questions.
Need new dump

shit...all question change....i lost my money .....

Dumps not valid anymore , failed the test on 19 Sep :( , 100question , no sims.

If you study this dump alone, you will surely fail exam 400-101. I committed this dump to memory before taking the exam last week and scored 609; 804 was needed to pass. I took the exam in NYC for 400 USD, if this matters.

Failed exam on 9/19 using this dump. Out of 100 questions, only saw 2 from the dump.

I just took the test and it is completely different from the questions provided on the dump.

Holy shit.. Pls update if the dumps are still valid or not. I have my exam scheduled Tom. Pls update on urgent basis.

Can someone confirm these dumps are valid I have exam in next 5 days - Thanks

Hi guys i really wanna know if this dumb still valid cz i have to take it 6/10 anyone can help us fast ... thanx

Not valid anymore.

I need to recert my exam asap - can someone please confirm if the dumps are valid or not

All changed 19 Sept, 3 my friends failed, 90% did not match anymore

Appears to have changed. No longer valid

The Korea is not valid.
All questions are different.
I failed the test on 9 Sep.

This dump is still valid. On the whole, the answers given are mainly accurate. I do disagree with some of them however.. see below:

Which two statements are true about RSTP? (Choose two)

A. By default, RSTP uses a separate TCN BPDU when interoperating with 802.1D switches.
B. By default, RSTP does not use a separate TCN BPDU when interoperating with 802.1D switches.
C. If a designated port receives an inferior BPDU, it immediately triggers a reconfiguration.
D. By default, RSTP uses the topology change TC flag.
E. If a port receives a superior BPDU, it immediately replies with its own information, and no reconfiguration is triggered.

Answer: B D

I think: A,D is better answer. Source: http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_13_ea1/configuration/guide/swmstp.html#wp1043798




If you change the Spanning Tree Protocol from pvst to rapid-pvst, what is the effect on the interface Fa0/1 port state?

A. It transitions to the listening state, and then the forwarding state.
B. It transitions to the learning state and then the forwarding state.
C. It transitions to the blocking state, then the learning state, and then the forwarding state.
D. It transitions to the blocking state and then the forwarding state.

Answer: C

I think: B is a more accurate answer here. Why? Because the Blocking state does not even exist in RSTP. Neither does listening, which only leaves B as an answer. Source: http://www.cisco.com/en/US/tech/tk389/tk621/technologies_white_paper09186a0080094cfa.shtml#states




Consider a network that mixes link bandwidths from 128 kb/s to 40 Gb/s. Which value should be set for the OSPF reference bandwidth?

A. Set a value of 128.
B. Set a value of 40000.
C. Set a manual OSPF cost on each interface
D. Use the default value.
E. Set a value of 40000000.
F. Set a value of 65535.

Answer: C

I think: B is a much better answer here. The question clearly wants you to consider changing the reference bandwidth and B offers the granularity in costs required given the bandwidths in the network. Source: http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_ospf/command/ospf-a1.html#wp3271966058




Which two statements about the EEM applet configuration are true? (Choose two)

A. The EEM applet runs before the CLI command is executed.
B. The EEM applet runs after the CLI command is executed.
C. The EEM applet requires a case-insensitive response.
D. The running configuration is displayed only if the letter Y is entered at the CLI.

Answer: A C

I think: A, D is the correct answer here. C is wrong because the script required a case SENSITIVE response because the key word "nocase" has not been specified in the script. D is correct because on the string match line, only an uppercase "Y" response sets the string result to 1, i.e. a match. Source: http://www.cisco.com/en/US/docs/ios-xml/ios/eem/command/eem-cr-a2.html#wp2508208016




Why is the neighbor relationship between R2 and R4 shown as ES-IS?

A. because there is an MTU mismatch between R2 and R4
B. because interface S3/0 of R4 is configured as L1/L2
C. because interface S3/0 of R2 is configured as L1
D. because there is a hello interval mismatch between R2 and R4

Answer: C

I think: A is the correct answer. C is wrong because one router is L1, the other is L1/L2 both in same areas. As such, they will form an L1 adjacency. However when a pair of IS-IS neighbours can only form an ES-IS adjacency, this is usually due to an MTU issue. Source: http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00801e1e2b.shtml




According to RFC 4577, OSPF for BGP/MPLS IP VPNs, when must the down bit be set?

A when an OSPF route is distributed from the PE to the CE, for Type 3 LSAs
B. when an OSPF route is distributed from the PE to the CE, for Type 5 LSAs
C. when an OSPF route is distributed from the PE to the CE, for Type 3 and Type 5 LSAs
D. when an OSPF route is distributed from the PE to the CE, for all types of LSAs

Answer: C

I think: A is the correct answer here. The Down (DN) bit is set by a PE to stop routing loops. Cisco PE routers only set the DN bit when it passes type 3 LSA's to a CE. Whilst Cisco PE's could also set the DN bit for type 5's as per RFC4577, they instead set the VPN Route Tag when it advertises type 5 LSA's. Sources: https://www.rfc-editor.org/rfc/rfc4577.txt and https://learningnetwork.cisco.com/thread/68738 and https://supportforums.cisco.com/discussion/10015591/down-bits-ospf-lsa-type-5 and https://blog.initialdraft.com/archives/2558/

Questions are changed , Dump is no more valid from 20/Sep/2014

I failed yesterday. Are there anyone at the same situations?

Failed today. Are there anyone at same situation?

Dump is not valid anymore, unfortunately :(. If someone has new questions, please post it here.

Failed Today... 40 of 100 and all the question are new..

Waiting for new dump to retake the exam..

Failed today .. :(
Almost all question was new..

Need new dump to retake...

Didn't valid anymore.. failed today
All question came up with new stuff...
Need new dump... :(

Didn't valid anymore.. failed today
All question came up with new stuff...
Need new dump... :(

clear exam today. still 100% valid,but be aware the questions not in order.

Passed today, 100% valid.

100 percent valid. passed 1000/1000 today sept 17. only answer choice order is changed

passed yesterday. 190q dump is still 100% valid.

100% valid. Cleared with 930 marks. Answers are shuffled in the exam careful with similar options.

i passed yesterday with 994 score. the dump still valid.

Anyone appear today ?

100% valid. Cleared with 976 marks. Answers are shuffled in the exam.

100% valid. cleared with 976 marks. answers are shuffled in the exam.

Yes its for 400-101 and there are no Labs

Are there labs in the exam???

Quick question, This dumps are valid for new version of Cisco routing and switching exam 400-101 ?

Passed today...100% valid
Answers are not in ORDER .. Take care

Passed today...100% valid
answers are not in order take care

Passed today...100% valid...be careful all the answers are not in order...Best of luck to others..

100% valid passed on August 29th with >900

Still valid - today cleared...Answers are shuffled in exam.

Still 100% valid, Pass today 961....Aug 26....dump is all you need.....note: Question are not in order...I like the old VCE designer that had option of randomly mixing answers out of sequence.

passed 984/1000. still valid. Thanks!

Still Valid. I passed today Aug 22 with 100%. 190 Questions is good enough to pass with 100%.Good luck everybody.

Still valid , scored 1000/1000

VALID!!! passed today (Aug 18) with 968 mark. this dump is enough, all 100 items i got are here. i also studied the 218 items dump but the additional items didnt went out. all are here so far. gluck to everyone and thanks to examcollection

Its Still Valid ! ! ! (08-08-2014)
Got 992/1000

Thanks !

Still Valid ! ! ! (08-08-2014)

Got 992 /1000

still valid
got 937/1000
answers are shuffled

still valid
got 937/1000
answers are shuffled

Hi folks, Just got certified CCIE R&S v5 written Exam, score 992/1000.
VCE file valid 100%.
one new drag & drop made me lost 8 point.
GOD BLESS YOU ALL.

100% Valid passed today with 992/1000
Make sure thorough with drag & drops

This is a valid exam file. I just passed my with 968/1000. Make sure you know all Drag and Drops. Answers are shuffled in exam.

100% valid. cleared today

100% valid, i passed yesterday with 961/1000..
you will get different order of options..

passed today using this dumps - 100% valid till now.

Hi All,

This is valid as I passed with 937/1000 marks.

Hi is this dumps valid

Is this still valid ?

100% valid.. passed today 1000/1000...

This dump is 100% valid. passed today with 891 score

Hey Rohan what is your result???? Is this dump Valid ?

i passed... update by sujith is false.. needs to be deleted

Hi everyone, this dump is still vaild. I passed yesterday with 984/1000.

Guys, any idea how to get the ebook (.pdf)
Thanks in advance.

is it stiill valid?? i am answering tommorrow

i am failed and did not found any question

THIS DUMP IS 100% VALID!!!

passed today .valid as at 8th July .. remember the order of the options are always different . i cant remember if they had some new question better to use this and 218Q as well

Is this dump Valid ?

is this valid???

there is no comment here, could you please update us if this is a valid dump or not...

i will be waiting your kind update guys...

thanks alot.

is this dump valid??

all good

I would like to help me with material for certification ccie R / S v5, web pages, files and books, of course the version 5

This practice exam question is okay; I used it to prepare for my exam and passed today; I got 968/1000.