Pass Your Cisco 640-816 Exam Easy!

Passed on the v last day, 30th of Sept 2013! Many thanks to this dump and 9tut. Would still use this dump for the latest exams, as practice Q. I would NEVER memories, but more use this as reference/practice. Thanks again!

I passed the ICND2 exam with a score of 900+ but I haven't received any email from CISCO confirming that I passed the exam. When I took the ICND1 exam, I got the confirmation email a day after. Any ideas why it's being delayed now? Thanks.

@raschid, on the after-exam report given by the test center, it is told that you must allow maximum 10 days for Cisco to approve your exam result.

Hi guys, passed ICND 1 on 6th of August, and ICND2 on yesterday with 837 :) but havent received any email about my CCNA degree! please, assist!
thanks for everybody, for Heavymood, 9tut, CBT Nuggets!

Passed Exam today 894. This dump and 9tut helped tremendously. Lots of questions from this dump. Some questions I had not seen like HSRP and quite a few SIMS.

Passed ICND1 on Sept. 16th after not sleeping for 3 days, then did a 2 week turnaround and passed the ICND2 today with a 972! One shot on both ( of course i had no choice since they expire today). HeavyMod, I give you my thanks as well as the 9tut team for your help. Although, IT ONLY HELPS IF YOU KNOW YOUR SH*T, GUYS. To anyone taking the new exams, good luck to you. I will be studying the bridging material for the new content, just so I can catch up. But glad I was able to get the CCNA before the 640-8xx exams' kill date.

Last day and I'm CCNA! 958/1000 =)

Passed today 944. 1 question was new to me, and I can't even remember what it was but was easily answerable. Had frame-relay hotspot and VTP lab. CCNA on last day available WHEW!

Know the concepts very well!!!!

Passed today!!! 75 of questions from this dump. new tasks and questions in the simLabs!!

Maybe this is too late, but for those asking for Frame Relay Lab, it is not a configuration Lab, All you need is show commands.
show frame-relay map and show run
And, yes, it is on this Dump

Exam is 100% valid and about 95% of the questions come right out from the exam. Good job guys and thanks very much. Passed with an 8xx.

@Raschid The Frame Relay sim you want can be found in "Exam I" of Heavymod.vce The questions asked may vary but it's based around that one. Know commands: show frame-relay map and show run
This vce is 100% valid

Guys, please help with Frame Relay sim. there is no any frame relay sim on 9tut. having exam after couple of hours! please!

I've passes the exam thanks to the dump by anonymous and 9tut.net.
I got 902/1000!! However, this dump has no options for drag and drop- it only gives you the anser,but its very very valid. they brought vtp and frame relay sims. Am so hapi. am now cisco certified.Thanks y'all!!

Guys, can you please help me to where to find the Frame-Relay Lab? Can't find it. Thanks in advance.

Guys, can you please help me to where to the Frame-Relay Lab? Can't find it. Thanks in advance.

Valid Dump, Im not a 100 % sure, but I believe I had a couple of new questions about STP. Anyway, this is one of the topics that you must understand very well.
9tut and this Dump are great resources as long as you know and understand the concepts. Memorizing wont get you certified. Great help from Jeremy Ciora from CBT Nuggets.
Here is a good video for STP:
http://www.youtube.com/watch?v=_g85HRd-l88

Passed today with 978. Sweeeeeet!
Good luck to the last exam takers!!

Surely Item 104 of 271 (Exam C, Q4) is completely wrong!?!
Well, this is taken from Todd Lammle stuff and he certainly thinks it is!!!!

Now at 13:30 I will do my ICND2 exam, I hope to do well, I studied all this dump and 9tut lab. I will let you know my score.

Passed 888! BUT I made a complete hash of VTP sim??? Can anyone help me understand why switch to would not go into enable mode??? I had got the info I needed from switch_1 then went to configure switch_2 with vlan IP address + dg address + vtp mode but could not get passed enable!!! WTF?? Lucky I passed or I'd have written a strongly worded email! ... THANKS V MUCH HEAVYMOD!

Passed 888! BUT I made a complete hash of VTP sim??? Can anyone help me understand why switch to would not go into enable mode??? I had got the info I needed from switch_1 then went to configure switch_2 with vlan IP address + dg address + vtp mode but could not get passed enable!!! WTF?? Lucky I passed or I'd have written a strongly worded email! ... THANKS V MUCH HEAVYMOD!

@ Denise what sims did you receive today?

Passed today. Yes, know the concepts. The dumps help. Best of luck to you all.

@AJ. How could the sh run be disabled if you need a password, its the only place you can find a password isnt it?

Hi Guys, Gave my test today and passed with 986/1000. Every question was from HeavyMod and Anonymous. As mentioned by previous candidates that the IP address and answer sequence were changed.
I had VTP and Frame Relay (Note: In frame-relay, show run command was disabled to find out default encapsulation for serial interface. So I had to use Show Interface Serial 0/1 to get encapsulation details.
I studied from HeavyMod, Anonymous and 9tut.net
Goodluck 

Got through the exam.. I'm CCNA qualified now. This dump is really valid, but answer sequence were changed, therefore read the full answer before select the answer.. VTP and Frame Relay was there. Do this dump thoroughly.. and get to know the concept.. then you will pass surely.. Good luck and wish you all the best.. Thank you very much..

@Mr. H.

Was your Frame Relay and VTP sims the same as heavymod?

VALID, VALID, VALID!!!! But with that being said please know concepts and not memorizing answers. Every question was in this dump except for 1..Please go over all labs and drag and drop as well. If you don't pass by the 30th and are required to take the new CCNA ICND 1 and 2 i have the CBT Nuggets videos for them and I am willing to help out anyone who needs them. Passing score is 825 and the test consist of 45 questions. I passed yesterday with a score of 888. CCNA BABY!!!!!!!

Everyone recently is getting the same Frame Relay and VTP sims so I don't understand why it is needed to study all labs on this dump or 9tut. It seems you can just study those.

Passed today. VTP and Frame Relay sims. Damn at the frame and IPv6 questions. Didn't expect much of either and that was most of it. Used this dump and 9tut.net. Every questions I had was on this dump.

Here's the best strategy to pass. Study the dump here for multiple choice/single choice questions and learn the sims that are on 9tut.net. The combination of the two will guarantee you know what you need to know. Memorizing answers will do no good as they are changed up and without understanding the process and the theory you won't be able to figure out which of the answers are still correct once the wording and letters change.

Good luck. I squeezed in before the cutoff on the 30th. Whew.

Has anyone who has taken ICND2 640-816 recently received any lab on their test other than VTP and Frame-relay? Should we only focus on these two as far as labs are concerned?

Passed today with a 972 score. Every question on the test was from this dump. VTP and Frame-Relay sims.
Watched CBT nuggets using double speed (easier to focus on it) 2 times. Made notes and made sure I understood concepts. Installed VCE Mobile on my smartphone and studdied this dump for couple of days everywhere I went. Checked Sims on 9tut.net and used their packet tracer sims. Used Cisco ICND2 study guide book from Cisco Press for reference.

Thank you very much for all your help.

Passed today with 944 , each and every question was from this dump. i am failing to understand where did i go wrong Haha.

So in regards to the frame relay dump the question which asks for what is the password required for the east side ?

In my sim i did a show running-config and the password was set to C0ns0le (cant remember character orientation and syntax) and that was the correct answer, so people before you choose no password please do a show-running config . also the ip addressing and dlci numbers were different and same in the VTP sim, but if your concepts are clear you will figure that out easily.

Thanks for the great upload , you are a life saver !

Does anyone know all the simLabs for ICND2 and the links for them?? Thanks!

Flova, Thank you, I take my exam this Thursday. Passed ICND 1 about a month ago.

Dump is very valid. Make sure you check about the 9tut..Don't get panic when you start your exam VTP sim. On my 2nd question, I had VTP Sim..
"
Determine and configure the IP host address of the new switch.
Determine and configure the default gateway of the new switch.
Determine and configure the correct VTP domain name for the new switch.
Configure the new switch as a VTP client."
....Passed today with 972 score...you have only one chance..so please make sure you pass the exam. good luck

@Denise My understanding is the Frame Relay Sim is the question within this dump with the Dubai Router. I believe during the exam you will need to do a show frame-relay map to get the same result seen as part of this question. Some correct me if this is wrong info.

Will someone please tell me where I can find the Frame Relay Sim?
Thank you for your help.

Dump is valid, I passed on the 19th with a 958/1000. I had the vtp and frame relay sims. There might have been one question I saw that wasn't on this dump, and obviously Cisco changes the order of the answers so you can't just remember "a, c ,a, b ..". But this dump is 100% valid

*Also to Cisco Packet Tracer!! Big help!

Valid 100% Passed with a 944/1000. Officially CCNA Certified! :D Shoutouts to CBTNuggets, 9tut, HeavyMod/Examcollection!

@MC sounds like that person signed up for the new ICND2 exam not one that is related to this dump.

All: someone took ICND2 today and the test has changed.
http://www.9tut.net/icnd2/share-your-icnd2-experience/comment-page-48#comment-212972

if anyone have any idea, please advise.
thanks

@Bob,
First of all congrats, I'm going to take it tomorrow, but very nervous and scare, there are lots of topics to cover, can be kind to tell what Labs were there and how many, and what about the Drag and Drops question how many were there. Thanks in advance for your time and help.

Still very valid. Passed today score 944. EVERY question on the exam was in this vce. Sims were there too, exactly whats on 9tut.net

@alex, type your both first name and second name simply separating them by a space into the first name box respectively. Filling the box like that does not cause any problem.

@Alex. Why are you so much worried. Just stay relaxed. I think you can register without Middle Name. It wont matter as long as you provide your first and last name as it is in the real world. Read the dumps and take the exam. Get CCNA certified. Wishing you best of luck. :)

Please help me!!

I must to register to cisco.com. They require only the FIRST NAME and LAST NAME and no middle name. I have a middle name too. What can i do?? Can I register without middlename?

Apologies meant to say I am now CCNA certified :-)

Dump valid 100 % passed today 900+ and I am not CCNA certified. Sims I encountered http://www.9tut.com/ccna-hotspot-questions/comment-page-12#comments%20 and http://www.9tut.net/icnd2/icnd2-labsim/vtp-configuration-sim#more-129%20. They present different IPs on all questions from this dump so no subnetting inside out and you will be fine. Had a number of drag and drop questions also but they were all in this dump. Thank you :-)

Hello, i want to pass this exam on 30th of september, because no other free places is available. How do you think, i will give the exam in the old syllabys?

Still relevant in the UK.

Passed today with 944/1000.

Only one Sim on VTP. Also had two testlets with four questions in each. All of the questions on the exam where in this dump.

Huge thanks to the uploader and everyone here for their advice.

Passed my ICND-2 :D successfully with 944 out of 1000. Read this dump, another one by same name like heavymod drag and drop and there is another dump titled as Download Cisco.passguide.640-816.v2012-05-15.by.Daniel.232q.vce. Available on this site.

I read all of these three and they are all pretty much the same. Maybe a question or a two would be new in all of them. I wanted to check which one is a bit different but they aren't. So my opinion grab all of these three dumps and read atleast two times which I also did. I also prepared watching JEREMY CBT NUGGETS series, ofcourse who could in their sane mind could ever imagine to miss JEREMY's Videos. He is really a star. Thumbs up to him. and then I also consulted TRAIN SIGNAL CHRIS BRYANT videos. They contain quite much detail which JEREMY never touched (WONDER WHY?) but I can tell you that CHRIS BRYANT is really a sucker. Very dry person and pathetic way of teaching.
There are few questions which these dumps will show you a WRONG ANSWER as CORRECT. So check it out and stay ALERT. I google every question before taking exam and found the MISTAKES in approximately about 10 Questions. Because I prepared well so I knew in my guts that the dumps are showing me WRONG ANSWERS as CORRECT ANSWERS.
So hurry up before 30th Sept 2013 before this old syllabus is kicked out officially by Cisco and the NEW ONE is ushered in. Go for it....

This dump is still valid. I passed ICND2 today and 80-90 % of the exam questions were from this dump.

@isayfever,
Answer B is correct because,
Explanation:
In this example NAT is translating the 10.10.10.4 (Router4 IP) statically to 172.16.6.14. However,we can see that Router7 does not have any route to the 172.16.6.0/24 network so there is no wayfor Router7 to return the ping traffic back to Router4. Configuring a static route to the 172.16.6.0network will fix this problem.Note: The reason that pings to Router5 work is because it knows how to get back to the172.16.6.0/24 network, since this network resides on its directly connected interface.
Cehck this link for reference,
http://www.scribd.com/doc/51001365/640-802-guide-for-CCNA (Question # 422).

Hello isayfever, the question states there is not a routing protocol configured on the routers, so there would be no communication between routers that are not directly connected unless they are (Statically routed). The NAT configs alone do not allow the communication between Rtr4 and Rtr7. Hope this helps, if not please feel free to correct or expand upon my thoughts everyone! :)

I passed yesterday with 986. I dont know if i have enough time for the ICND2 (640-816) until 30 sept.:((

What is the best matterial INFO for ICND2?

http://i40.tinypic.com/28tdhlt.jpg
Can someone explain to me why C is the correct answer? We're pinging 172.16.11.7/24, and NAT inside global adrress is configured to 172.16.6.14/24, and what R4 has to do with this?

pass with a very high score!!!

$ chris bryant trainsignal videos and mp3s. i cant read a 600 page book, but i can watch thousands of hours of videos and absorb all the info by brainwashing myself. i watched the entire series 3 times and listened to them 5 times which was severe overkill and not necessary to pass.

$ quick reference sheets - read it once

$ official cert guide - used only as a reference - i only read half of chap 1

$ boson netsim 8 (lab, lab, lab!!!)

$ packet tracer and lab some more!

$ HeavyMod.271q.vce until i was getting 1000% every time. lab out drag and drop questions as much as possible and get really comfortable with them. you dont wanna panic on a simulation during the exam with 3 minutes left and more questions to answer. on the real exam i got about 5 drag and drop / simulations. the sims took me a long time. but having practiced them helped me keep my cool and work through them and make up for lost time on multiple choice.

i over studied, procrastinated, got lazy, partied and took 4 months to do what i could have done in 1 to 2 months - easily. it's all about how much time you devote to mastering networking. i got distracted a lot with facebook, youtube, movies, girls, and getting drunk. but once you waste enough time and you see people that started after moving ahead of you, then hopefully you start to wake up. if it's not gonna make you money or make you better, don't do it. focus, study, take time off when yo need it. but get back on track asap. whatever you do, don't stop! don't ever stop studying!!! ccnp here i come.

This dump is 100% valid. Wrote n passed today 13 sept and got 9xx. Had seen every qtn from this dump + 9tut. Thanx heavy mod n 9tut

Exactly as BB said. Very valid. Thanks everyone.

This dump is still valid. I passed ICND2 today and 80-90 % of the exam questions were from this dump. Thumb up!

@matt download heavymod vce this one on this page there are 35 drag and drops in section F. go through those and you will be fine

Can anybody tell me specifically what drag and drops you have encountered?
I understand the SIMS I will run into. I just need the drag and drops.

Just passed ICND 2 with score of 972 :) after months of hard work. Ok guys listen,

- 45questions 75 mins pass score 825
- Heavymode dump + 9tut = 95%.
- don't remember answers, they are scrambled.
- Frame relay show sim => http://www.9tut.com/ccna-hotspot-questions/comment-page-12#comments
- vtp config sim => http://www.9tut.net/icnd2/icnd2-labsim/vtp-configuration-sim#more-129
-ospf =>http://www.9tut.net/icnd2/ospf-questions Q1

REMEMBER 2 new questions in ospf Q1
1. what are the 2 commands to load balance between R3 and R4.

hope this is helpful guys. make sure you know the concepts and you'll be fine.

Good luck!

Thanks HeavyMod

I passed today..I brain farted on my VTP SIM and just could not get it right. My Test was strange I had probably 7-8 drag and drop questions. score 860

Passed with 860 valid dump use 9tut too i had vtp sim and frame relay hotspot

Valid or at least 80% of it in South Africa.

VTP and OSPF sims.

Doe the simms are you all using 9tut.com or 9tut.net. does it matter? are they identical to the test. I am not even a tech. my job is paying for a few of us to take the test so they can tell people thye have certified people and can sell more equipment. I wont ever even get to use this stuff I just need to pass the test. most people say they get the eigrp, vtp, and frame relay. the only frame relay I can find are drag and drops any ideas..PLEASE help

PASSED! So happy and relieved! Study this dump and 9tut and you will be golden! CCNA BABY!!

@UKPerson
congrats.......

what where your lab sims?

Passed recently with this. 90% +

Dump is perfect.

Can't see for looking..where is the Frame Relay SIM?
Cheers

I am taking the test next week. I was just wondering if the Sim questions you got on your test where they the same ones from 9tut exactly. With my jub I don't use anyof thisstuff but they want me to be certified. once I do pass the test I will forget most of it in 3 months since I don't use it, I wiould hate to study 9tutonly to fin out them questions are complete=wrong. have you nototiced any nquestind that were war off fromm the 9tutsims

i passs today!! with 90x !!!! dumb still valid!!!!! but becarfull!!! THE ORDER OF A LOT OF ANSWER CHANGE!!!!!!!! SO DONT MEMORIZE!!!!!!!!!!! GOING FOR CCNA SECURITY!! :)

Passed today with 944. Very valid in the UK. SIMS = Frame relay with 172.30.4.4 ip address, OSPF with two new questions and VTP configuration sim (from 9tut). Other than this only 2-3 new questions.
Good luck to all future CCNA-ers.

Passed today 916 dump still valid, used this and 9tut

Passed today with 916. Frame relay with 172.30.4.4 ip address, OSPF with two new questions and VTP sim. Other than this only 2-3 new questions.

Good luck with exam.

Passed with 972 and thank God. This dump is very valid. Got VTP configuration, Frame-relay Simlet question, OSPF Simlet question (Kinda different compared to this dump but if you study hard and you know the concept you can't go wrong), couple of IPV6 questions and a bunch of ACL.

Going for the CCNP! Goodluck exam takers!

Pass on 08/23/2013 with 920 , perfect this dump , valid in USA

FR SIM , OSPF SIM and VTP SIM , only a new questions , and 3 Drag and drops

Perfect this dump , Study VTP , 3 drag and drops , OSPF Sim and questions , Frame Realy but they change to 172.30.4.4 instead the one 172.30.0.4 , it is confused there becasue when you type # show running-config and show frame-realy map you do not see this IP in the list of response or choice , be carefull , only one new questions.

In United States is valid , move on fast , becasue the new one came different and more hard in October 1st 2013 .

Good Luck

85% valid. VTP, frame relay lab sims, access list.

Thanks HeavyMod. Passed today w/ 972, Hotspot, VTP, Frame Relay and 3 DND questions but different IP's.

Passed on the 19th August with 902 :)
The dump is 80% valid but I would check out 9tut for simlets and tests also. Good luck.

This dump it's 95%, certify last week 930.
vtp silly labo, OSPF and frame relay labos.
The only diferent was a couple of questions about route summarization.

Thanks

Passed last week with 944 and dump still valid. There were lots of drag and drops, some here and some not. The ones not on 9tut or in the dump were about ACL's so make sure you now what you are doing with them and you will be Ok. There was also a new OSPF sim like the VTP sim so know OSPF.

thanks

Still valid passed with 920. Just a heads up IP addresses for all sims are different on actual exam and some with new questions.

I took my ICND2 exam yesterday. This site and 9tut was extremely helpful. I questions were spot on. However, the answers are out of order. So, it's best to not try to memorize based on order. If you understand the concept, you will have no problems.

I had the VTP sim. Basically, you added a partially new switch and have to finish configuring it. You look at the first switch to get it's vlan1 ip address and mask. Then get the ip default gateway. In addition, you will have to take note of the vtp domain name. Then just go to the new switch and finish configuring it.

I had the Frame Relay testlet. Questions 1 and 2 are the same. Qn 3 and 4 are different. The DLCI is different for one of them. One of the questions as for 172.30.4.4. Unforunately when you do a show frame-relay map doesn't exist for 172.30.4.4. However, there's a 172.30.04, so I used that one.

Finally, there was a drag and drop I didn't recognize. It had to do with security. There were 5 statements and you had to match up with the security element. For example, to protect telnet access you would use vty 0 4 with a password. Another one was to protect from seeing password in configuration file you would use service password-encryption.

That's about all I remember. Everything else is spot one with this site and 9tut.

Good luck.

Charlie.

Passed today with 890.
The Frame Relay testlet has changed
qn 1 and 2 are the same essentially, they have changed the DLCI numbers and renamed all of the locations. Qn 3 I cant remember, but Qn 4 asks what DLCI will be used for 172.30.4.4. I remember that clearly because there is no 172.30.4.4 listed when you do a sh frame map and its not configured under sh run for any interface. So I selected the DLCI that was listed for 172.30.0.4 - I think its a typo. i think the DLCI number was 106 or something like that.

Everything else was exactly the same as in this dump.

They shuffle the answer location around a lot in the actual exam, so be prepared for the same answer options to be there but in a different order.

Can smbdy answer this one for me.
What destination Layer 2 address will be used in the frame header containing a packet for host 172.30.4.4?
A. 353
B. 86
C. 942
D. 404

Passed the exam today. CCNA!!

This dump is 95% valid. I had Frame Relay, OSFP and VTP sim. Two/three drag and drop. Frame Relay and OSFP SIMs question has changed. Please make sure you understand the concept thoroughly.It will not be an issue. Good Luck!

Good Day All -

I passed the ICND2, thanks to this dump and 9tut. I had the VTP sim, the Frame Relay sim (4 questions, but 2 were new I dont remember what they were) and 1 D&D (boot sequence). The questions were 95% from this dump.
Thanks HeavyMod!

I think Exam "F" Q-17 wrong.. plz correct me

Hi can someone confirm what VTP sim they are getting please? Is it the one on 9tut.net(ICDN2) or 9tut.com (CCNA)

Thanks

Hi guys. I think Exam "F" Q-30 is wrong..

Passed today using this collection.958/1000. VTP lab, Frame Relay sim, EIGRP and OSPF Drag and drop, drag and drop http scenario with permit and deny options,

@mgiordano --True thou I took this as a learning curve, I guess i've undermined the question and took it light. But thanx for your comment. Cheers mate. Don't you have CCNP CBTNuggets Video's?

@David
192.168.2.32/27 and 192.168.2.31/27 are on different subnets. It looks like the default gateway was using the last available IP address on the subnet and your first available would have been 192.168.2.1/27 if it wasn't taken. Hard to give you a proper answer without the full question.

Ooooh Noooo, I think i'm stupid, I now see my mistake. 0-31, "32-63", 64-95, first IP should have been 33 "i'm I correct? overall this Dump is valid 110%