Pass Your Cisco 640-822 Exam Easy!

Hello can any 1 send me Valid & Accurate Dumps of (CCENT) ICND2 plzzzz if possible mail me on omairjawed2010@hotmail.com

Thanks

took the exam on the 30th of September 2013 and passed; talk about last minute. The dump helped a lot. Too bad cisco 640-822 is now obsolete.

This dump is 95% Valid! Passed with a score > 816! Know your SIMs from 9tut, had 3 from there: Implementation SIM 2, Show Config SIM, and Security Testlet. Know your subnetting & drag and drop below:

Leased Line ————— PPP
Packet switching ——- Frame Relay
Circuit Switching ————PSTN
Cell Switching —————-ATM

Nothing to panic about! Have the confidence, study, and you will pass!

thanks to pass4sure, i passed today 962.
it's 100% valid

thanks to passguide .
Pass today with 899 marks.
The dumps is 100% valid.

This dump is 95% Valid! Passed with a score > 875! Got hit with an unknown question from this dump. Know your SIMs from 9tut, had 3 from there: Implementation SIM, Show Config SIM, and Security Testlet. Know your subnetting & drag and drop below:

Leased Line ————— PPP
Packet switching ——- Frame Relay
Circuit Switching ————PSTN
Cell Switching —————-ATM

Nothing to panic about! Have the confidence, study, and you will pass!

thank a lot for dumps ,got 1000.
can i answer icnd2 v2 or do i have to answer icnd1 v2 to answer icnd2 v2.

90% is this dump, study ip addresiing is very import and the 9tut.com.
i passed whit 894
thank examcollection

Hello everyone I would just like to let everyone know that this exam is 90% valid. I got 962 out a 1000. Don't get nervous stay clam and trust that practicing this exam and using 9tuts sims will ensure you pass. Also practice the Cisco practice exam on Cisco website to get used to the GUI and know your subnetting.

Good luck!

dump 90% valid, I pass today with 930/1000. study believe because with this dump yet the time to pass

Q45, Exam B:
Good answer is: C,D,F
Answer provided: C,D,E
E & F should be swapped.

Thanks a bunch ,still valid took the exam today got 937/1000, 85 % of the question came from this dump, don't`t forget to copy run start when your finished configuring.

Took the exam yesterday. Passed 986. 90% was in this dump and 9tut, along with these two, studied Wendell Odom, Packet Tracer, Network Simulation, Cisco LabSessions. I got surprised with an OSPF simulation (surprised meaning no comments below said anything about OSPF in the test). Luckily, I knew it so I would recommend brushing up on this just in case you get it. From 9tut got the Security Testlet (really know your stuff guys, the screen shot of show run in 9tut is COMPLETELY different from the show run on the test), OSPF (just in case!), Show Configuration Sim, a few drag and drops. And make sure your subnetting skills are top notch. What really helped me answer those subnet questions quick is drawing out this table from this site: http://www.ic.ims.hr/informaticke_mreze/wlsm-subnetting-14.html. If you're familiar with out, THIS HELPS! If you're not, get familiar. You'll breeze by those questions. Good luck to those who still are going to take the test. Hope you all do great!

I am writing on thursday 26/09/2013. I am currently practising these tests. Hopefully I pass since all comments seems to ensure me that this practice exams work. Nervous but my hopes are high. Keep u updated on thursday. Wish me luck*

Passed today.This dump is VALID,90% of question from this dump only.

Passed today with 950/1000. This dump is VALID, but read all the posts on here for what the right answers should be. Know your telnet and console setup as they change the config on around so understand what "login", "no login", "line vty 0 5", "console", what password applies to what etc. I studied with this dump and the icnd1 simulation at 9tut.com. Exact simulation accept maybe different IP addresses.

Thanks TUF is confirms, that I am correct atleast for exam F Q14. As 9tut shows that Router#copy flash tftp: backup the current IOS image.

Where as, Exam F Q14 shows the answer for "copy flash tftp" to be used for replacing the IOS.

Please may request more Feedback from others about there experience with Exam F ? as this would be useful to both me and other test takers. Thanks

@honest, see 9tut regarding your question. http://www.9tut.net/icnd1/drag-and-drop-questions-2

Hi does anyone else seem to think that exam F has many incorrect answer and the question are very vague. For example Q14, Q18 and Q24.

For example it will show a router then say host connect to port fa0/3 is having problems etc..? but then the router is not labelled up so how are you suppose to know which port is fa0/3 ? you will be just guessing the answer.

Q14, show the answer for replacing router IOS, is "copy flash tftp" but I think the answer would be "copy tftp flash". The first command will instead make a backup of the IOS from flash to tftp.

Am I wasting my time on exam F ? thanks guys

Hope this helps!

Took the exam and passed with 920, these are 75% valid dumps as of now. Also I got one new drag and drop question and many other questions were not in this dumps. Sims were Show Configuration Sim, Implementation SIM, and Security Testlet (Answers were different so understand the question).

Note: Multiple Choice Answers are jumbled up or with different ip addresses so becareful.

Are they changing the format of the exam after this month? does anyone know, and if Yes what would it be?..Thanks

Passed today with 950. Dump is still valid. About 90% of the questions from this dump. All labs are on 9tut.net. Sims were: Implementation sim and security testlet.

Drag and drop:

leased line ————— PPP
packet switching ——- frame relay
Circuit Switching ————PSTN
Cell Switching —————-ATM

I studied with Cisco press, examcollection, and 9tut

I passed yesterday with 986. I dont know if i have enough time for the ICND2 (640-816) until 30 sept.:((

What is the best matterial INFO for ICND2?

Passed the exam 920/1000 using this dump, 9tut, CCNA in 60 days book, CBT Nuggets with Jeremy, and a course with Udemy today. I actually register for the wrong exam by mistake and took the 100-101 and thought I was going to fail but the majority of questions definitely were either very similar to or exactly on this dump. Had I taken the 640-822, I probably would have done way better. I got hit with an OSPF lab that I was quite unfamiliar with and still managed to do well. Study, Study, Study..

DUMP IS VALID passed using this dump. There was a couple of sims not on here or 9tut on my test but I assume they were not counted towards my final tally

Passed today with 820+ a massive thanks to examcollection and 9tut.Just 2 questions out of the 50 were not on this file. Know the basics of subnetting and cover these questions and the SIMS from 9tut and you will pass no problem.My Sims were Implementation and Configuraton. Had security testlet also

@Acess
!!!!!
on the security testlet question:

B. unsecured message on banner ???

"banner motd ^CWelcome! If you encountered any problem, please consult the administrator^C"

Is it unsecured? Why?(there is a password or someting?i don't see it)

Maybe is an inappropriate wording in banner message.

And ..

C. remote access can only be made through telnet or SSH

From the command "transport input telnet ssh" we learn that remote access can be mad through telnet or SSH -> I think C is correct (instead of B)

@alex

this applies to q50 and q13, do not follow blindly from the dump.


NAT outside local - 172.16.1.254

NAT inside global - 206.165.201.30

NAT outside global - 128.77.188.166

NAT inside local - 172.16.1.23

Identify security threats on RouterA (select 3)

A. unencrypted vty password set
B. unsecured message on banner
D. user gets level 15 automatically by default



PLEASE LOOK at FQ50 and FQ13, in this dump. Two drag and drop questions about NAT have different answers. Very important to know what is the correct answers, and the logic of them.


-will explain to you when I open up my dump later.

RouterA :
-------------------------------------------------------------------------------------------------
no service password-encryption
ip http server
ip http secure-server
!
enable password cisco
!
username ciscouser privilege 15 password 0 cisco
!
banner motd ^CWelcome! If you encountered any problem, please consult the administrator^C
!
line vty 0 4
password 4t&34rkf
login local
transport input telnet ssh
----------------------------------------------------------------------------------------------

Identify security threats on RouterA (select 3)

A. unencrypted vty password set
B. unsecured message on banner
C. remote access can only be made through telnet or SSH
D. user gets level 15 automatically by default
E. unsecure http server access

The BOY from Ireland
Did ICND1 on the 6th, passed - thank God. A big thanks to 9tut and examcollection.
These 399 Questions still valid and are approx 90% of exam questions.

Passed Yesterday 7th September with 925. still valid...

PLEASE LOOK at FQ50 and FQ13, in this dump. Two drag and drop questions about NAT have different answers. Very important to know what is the correct answers, and the logic of them.

Passed today 6 September with 937. This dump is 90%-95% accurate and still valid. Study this and 9tut and you will pass.

@alex
Q46: The switch is set to full-duplex.


@DEE
Answer: Ensure that the serial cable is correctly plugged in to the interfaces.

Passed today with 825
Dump still valid
Used this dump and 9tut

@James.. To answer you second question, the subnetting questions may be "similar" meaning the IP addresses are different so you will still have to know HOW to subnet to get the correct answers.. you cannot rely on memory alone for these questions. The key to subnetting is PRACTICE PRACTICE PRACTICE.. and there really is no getting around that. A good link to practice is http://www.subnettingquestions.com/

I would also look at everything on 9tut as it pertains to ICND1 especially the sims.. they can be found here: http://www.9tut.net/category/icnd1/labsim

Hope this helps.. Good Luck!

@James.. The Security Testlet can be found here: http://www.9tut.net/icnd1/icnd1-security-testlet

Be careful though because 9tut "guessed" at the answers and don't provide very good explanations for some of their choices of answers. For example, 9tut contends that the answers for "inappropriate wording in banner message" are wrong but the Cisco training manual clearly warns again using "Welcome" in the wording of a banner message so in this case 9tut has provided the incorrect answer.

The answer to your question Alex is B. My question is how many wrong questions are in this dump and what are they ? if anyone knows..Thanks

@Aces
A network technician is unable to ping from R1 to R2. What will help correct the problem?
A. Ensure that the serial cable is correctly plugged in to the interfaces.
b. aply th clock rate 56000 configuration command to the serial 0/1 interface of r1

Another Question: CQ46

Refer to the exibit. An administrator replaces the NIC in a desktop PC with a new NIC. The NIC in the PC configuration is set to "100 Mb Half!". Now the PChas intermittent connectivity and loss of communication so the administrator began troubleshooting on the switch. Using the switch output shown, what is the cause of the problem?

A. Input flow control is off.
B. The switch is set to full-duplex.
C. The port is administratively down.
D. Fast Ethernet is incompatible with a megabit NIC.
E. The counters were not cleared after the hardware was replaced.

It says answer is C, but prompt shows "FastEthernet is down, line protocol is down (not connected)", and "Full-duplex, 100Mb/s".

What is the correct answer (IT IS B??)?

@Alex

Question 1: Correct
Question 2: UDP not VLAN
Question 3: D

I'll post it up asap.

How many answers are inccorect??

So far i have:

1. The network administrtor is configuring a CISCO router. The prompt on the screen is Router(config-if)#.What is true about this prompt? (choose3)
correct updaded answers:
C.An interface can be activatet or deactivated from this prompt.
D.The admin will arive at this prompt by typing interface fa0/0 from global config mode.
F.An interface IP address can be configured at this prompt.

2. Which transport layer protocol is used for critical Voice over IP services?
it says E. VLAN

but i think the correct answer is D. UDP

3. At the global config prompt, the admin has jus entered the following command on a router that has not been previously configured for RIP:
RouterA(config)#router rip

What state is the router now in after executing command?

A. The RIP process has started, but no updates are being sent. (the correct old answer, but i am not sure about this)
B. The RIP process has started, and by default all updates are being sent RIPv1
C. The RIP process has started, and by default all updates are being sent RIPv2
D. The router has entered router configuration mode but the RIP process has not started ( some users from this web site said that this is the correct answer but i am not sure)

PS: plese tell me about this last question and other inccorect answers from this thumb.Thanks!

This dump is 100% valid. Please do take note that some of the answers are incorrect, do some research and study them carefully.I had show configuration SIM, Implementation SIM, Security Testlet, Frame Relay- packet switching drag and drop. Had perfect score 1000/1000. Special thanks to exam collection.

Passed today! 100% valid dump, there are some wrong answers but overall excellent study guide along with 9tut.net's sims. Understand the concepts like every one says and you will be golden.

Thanks for all the help!!

@ Mrs. E

Where can I find the Security Testlet?? Also, can you provide some good resources for subnetting questions that may be on the test? Thx.

Congratulations Vizzio I am sitting it on Monday worried about it :-( what 3 sims did u encounter?and can you tell me did you have many drag and drop questions?

Just passed a few hours ago with 899. This sim is valid. Had probably 90% of the questions on here and 3 sims from 9tut. Heading for ICND2 now. Thanks :)

Aces.. the sims are 4-5 questions each and you do get partial credit for whatever you get right. Anything from this dump and 9tut will benefit you greatly. KNOW SUBNETTING because the IP addresses are different on the test and you will have to know how to get the correct answer. From what I've read here, it seems as if the security testlet is showing up on more people's tests so I would study that too. You can't go wrong if you know the SIMS from 9tut and study this dump.. combined with having a solid understanding of the concepts overall.

Mrs. E, what type of questions did you encounter? any hints/tips as i'll be taking it on 4 SEP. Is the simulation questions counter as 1 questions or 4/5 questions?

Passed yesterday with a 950/1000 score. This dump is definitely valid. Be careful memorizing the questions because some of them (not many) have the incorrect answers.

My test consisted of the Security Testlet, the configuration SIM, and Implementation SIM.. All can be found on 9tut. I had one drag n drop that I hadn't seen before but it was super easy (Frame Relay=Packet Switching, ATM=Cell Switching, etc). A couple of other multiple choice questions that I had not seen before but if you know the material shouldn't be a problem. All other questions came directly from this dump.

I'm moving on to ICND2.. Good luck to everyone!

Also what Berto said know those commands too

Exam is valid just pass today. The question are in different order.

Passed today with a 925, this dump is 100% valid
-watch out as some of the Teslet outputs were different. (Hotspot & Security)

SIM: Implementation 1 & Implementation 2

The following commands are your friends.

show cdp neighbors detail
Show ip interface brief
Show interface x0/0.
(Packet Tracer before hand doesnt hurt either).

In regards to subnetting, I would draw a subnet chart on the dry erase sheet they provide as soon as you get it. If Commands are not your forte, write out the ones they provide as you see them on your board.

Finished with 35 minutes left.

Studied CBT Nuggets, 31 days Before Your CCNA exam & 9tut.

I used OneNote 2010 to Organize and Prioritize the questions I constantly had issues with (with 9tut explanations under each to grasp the concepts).

I also used Drop Box/VCE mobile app on my phone/ipad to study the dynamic list of questions I had issues with, wherever I went.

Cheers to all!

Dump is 100 valid, pass today with a 915.

Passed today with 9xx , million thanks , this dump is 100% valid

@mdu:

We have subnet 192.168.4.0 /26
=> 255.255.255.11000000
Increment=64

=> .ranges1. 192.168.4.0 - 192.168.4.63
2. .....64 - ........127
3. ....128 - ........191
.....192 and so on
Finaly, we choose:
192.168.4.125 and 192.168.4.67 - belongs to the range nr 2

Good day -Please explain the answer to me - An administrator is working with the 192.168.4.0 network ,which has been subnetted with /26 mask.Which two addresses can be assigned to hosts within the same subnet?(choose two)
either 192.168.4.132 or 192.168.4.128,192.168.4.125,192.168.4.67,192.168.4.63 or 192.168.4.61.

@Jun from Guam

what were the lab sim in you exam???

100% Valid! Passed today with a 974/1000. Praise God! Shoutouts to Jeremy Cioara of CBTNuggets, Examcollections.com, 9tut.net, Cisco Packet Tracer:D On to ICND 2!!!

GREAT!! Valid Dump!!
But be aware that this Dump needs a few corrections. (look at older comments).
I used CBT Nuggets, Todd Lammle and 9tut. It is very important to understand why each question and not to commit answers to memory, There are a few new questions, but if you understand these concepts you will be fine.
Use the dumps as a practice and you will be good to go.
Also, for Labs go to http://www.9tut.net/category/icnd1/labsim (thanks for that Lair from Brazil)

@Alex CISCO does not reveal these details but this will guide you: http://www.9tut.com/ccna-faqs-a-tips

Understanding how and when to use the show commands is critical for this exam.

Good Luck everyone!!

Hello! For anyone who has already taken the exam, please help me:

How many points have the sim labs questions in the ICND exam?

The SIM LAB questions have the same number of points with subneting or theory questions?

(for one sim-lab question u need 5 - 20 minutes /question)

This dumps is still valid 90%. Practice subnetting. Know the concepts. I read wendell odom and did this dump that's it. Passed above 900

Passed exam yesterday.

This and couple of dumps above are valid, but do not rely only on them.
I had couple questions which were never on any of dumps.

This Dump still valid in Philippines
Thanks to passguide & 9tut, passed today 887/1000.

Pass today with 950 this dump is valid.
I had 3 labs: Implementation SIM, RIPv2 SIM and Show Configuration Sim.
http://www.9tut.net/category/icnd1/labsim
Thank ExamCollection and 9tut.

hi i passed my test today with over 900 thanks for these questions 90% questions come from here and sims form http://www.9tut.net/category/icnd1/labsim. practice this questions 3 times at least then you will understand the concepts and subnetting (cbt nugget useful) and use packet tracer practice sims you will pass and time is key for the exam always look at the time. if i can pass this test you aloso can all the best. from australia

@DeAndre

Were the subnetting questions the same on the exam per this dump?

Took the exam today and passed with 937/1000 used this dump as well as CBT nuggets, Trainsignal and Wendall Odem's book. Questions were spot on. You do have to know your stuff though, especially subnetting.

For anyone who has already taken the exam, which one did you get? Or was it a combo of several? Also, the sims in this don't allow you to proper configure them. Thanks.

Does anyone know if they are changing the exam after September 30? are we still be able to take it in 2 parts?. Thanks

please some please help i . this question is really confusing .

1)The administrator is unable to establish connectivity between two Cisco routers. Upon reviewing the command output of both routers, what is the most likely cause of the problem?

A.Authentication needs to be changed to PAP for both routers.

B.Serial IP addresses of routers are not on the same subnet.

C.Username/password is incorrectly configured.

D.Router names are incorrectly configured.

Correct Answer says C but i think its B can some one please explain why is it C. this is from ccent exam .

Some people are asking to pinpoint any wrong answers in this dump. Here's one:

The network administrator is configuring a Cisco router. The prompt on the screen is: Router(config-if)#
What is true about this prompt? (choose three)
a. An interface password can be set at this prompt (WRONG)
b. Settings that affect all router interfaces can be globally configured at this prompt (WRONG)
c. An interface can be activated or deactivated from this prompt (CORRECT)
d. The administrator will arrive at this prompt by typing interface fa0/0 from global configuration mode (CORRECT)
e. The administrator will arrive at this prompt by typing configure terminal from the EXEC prompt (WRONG)
f. An interface IP address can be configured at this prompt (CORRECT)

When you show the answers, it shows f. as an incorrect answer and e. as a correct answer. That can't be right. Typing configure terminal from the EXEC prompt simply puts you in global config mode: Router(config)#


I'm pretty sure there were a couple of other wrong answers, but nothing that'll destroy your exam score if you studied hard.

Paul,

They're being decommissioned on Sept 30th. I'm currently trying to squeak in the 640-816 the week before that.

This dumps is still valid. Gave my exam on 7th and passed with 912/1000. Got two new questions, but if you know the subject then its piece of cake.
I recommend CBT nuggets, 9tut and above all PRACTICE on your commands and understand the subject.
Memorizing dumps won't help in sub-netting questions and in real life. Good luck guys.

Hi,
Does anyone know when these exams are being decomissioned?
Thanks,
Paul

Some of the sims are a bit confusing. Meaning I can't complete them in the dump. Can anyone verify if the subnetting questions are exact? Also, is everyone going through all the exams and memorizing the answers? Thx.

Hello . anyone recently did the ccent exam and passed using this dump. Can i please know if this dump is still valid as i will be taking the exam early next week,,,,,

Yes some questions have wrong answers. I appreciate if someone can clarify please. Taking exam in a few days.

so does anyone have a list of mistakes for this? not that it'll help me much now as i'm taking the test in a couple days, it's just that some answers threw me way off only to find out that i was actually right when i didsome searching/reading

Passed today with a 950. I recall only getting maybe two new questions, so this dump is fantastic. Also, get ready with your command lines for the sim questions that can't be properly duplicated.

Also, beware of one question you may run into at your testing site that has serious issues. show interfaces and show interface brief had contradicting information for Fe0/1. One command line showed up/up state, while the other showed admin down state. They also screwed up and put a broadcast address in for Fe0/1 interface address (x.x.x.15) but had it correct for the other command (x.x.x.14). If you see it, hit the comment button and let Cisco know.

Just passed ICND1 this morning and got 9**/1000.This dump is 90% valid. Although there are small glitches but it help a lot. For those who are taking icnd1, I recommend CBT nuggets, 9tut, pass4sure, passguide, know the basics, relax, don't deprived yourself of sleeping and pray a lot. Hope I can pass icnd2 in the future. Thanks guys.

Iam Going to give my CCNA exam . From Where I study most. IS this Dump is valid in Pakistan.Plz help me.I didn't read any book .

Just passed the exam yesterday this dump is valid and helped a lot, i read Wendell Odom book as well. Good Luck Guys

@ AzerS

It seems that most of the information on 9tut is geard for the ICND2 and not CCENT? Is this correct? Please share your study information for ICND1. Thanks.

Hello dears, just scheduled for exam on 31 June.studied from CBT nuggets, official book, CCNA academy, 9 tut and this dump.what else? please, share with information!

So, I need to purchase the VCE program and then download this file to study for ICND1? What about the new exam coming out in Sept.? Will this reflect the new one? And what tests are you studying for? i.e. Test A, B.

Was surprised when 80% of exam questions were the same as in this one!!!

Congrats John! You really flew through that thing.

I hope I can have a similar result tomorrow.

Examcollection give you practice question exactly like how they are on the real thing. CBT you have to buy or illegally get it yourself. Google it for more info.

@ John

How does exam collection work? What CBT nuggest did you use? Could you send me the link or .iso to download the nuggests. Thanks.

I also used CBTnugget and train signal for video learning, they helped a bunch i recommend train signal it goes more in depth than cbt.

PASSED today 887 I had 50 minutes left out of the 90. This dump is why I passed only 2 questions out of the 50 were not on there. One of them was a sim but it was just show commands, I also used 9tut, helped on a drag and drop. VALID DUMP!

& like you, I also use Packet Tracer.

On a different note, maybe this dump has had the correct answer for the router rip question all along. I've seen A & D and had been thinking that the answer was D, but now I'm thinking the answer is A (the rip process has started, but no updates sent).

The right dumps are good tools. Don't rely just on these though or you'll be in trouble. Definitely errors on some of the answers, but according to a lot of people the questions are valid. The IPs will change, so you have to know your stuff. A lot of the interactive questions on all these dumps are completely worthless and a number of questions also won't have an exhibit when it says to refer to one, or you'll get a question that there isn't enough info for. The dump definitely helps, but it's not enough on it's own.

9tut is a really good site overall, especially for the simulations, drag and drops, testlet, type of. questions.

Recently I've used IT Online University (it's OK at best), The Bryant Advantage (Much better IMO), Wendell Odom's 3rd edition, 9tut and I've looked over a couple of these dumps in preparation for my test on Thursday.

I was told that using "dumps" would be a bad idea to passing ICND1. How does this actually work? What study materials have you used to pass? I currently downloaded some CBT's from ISOHunter and working a little w/ Packet Tracer, but really overwhelmed with all the material to study. The dump idea seems to be the best thing since sliced bread. Your thoughts!!! Thx.

Congrats Jay-R! To respond to your inquiry though. The answer was not right. You have the correct process. The answer shown was actually the answer for a different, but somewhat similar question. Apparently this dump is still valid, but some of the answers given here aren't. Your question is one example. UDP is the transport layer protocol used for VoIP is another (And seriously VLAN? Really? SMH). A 3rd error is the router(config-if)# prompt question that has 3 answers, only 2 are correct (Config Terminal answer is wrong. Right answer is you're able to apply an IP address). Another is the router RIP question (right answer ends with RIP process hasn't started). I'm sure there are more errors, but I'm still glad this dump is available. It's a good look at the format of the test and it's still good practice.

Windchaser, thanks for the encouragement. Hope all is well and remains well.

Passed today (912/1000) with using this dump and cbtnuggets. You need to know your stuff tho.

p.s. ~85-90% of questions in this dump were on the test.