Pass Your Cisco 640-554 Exam Easy!

HEY MERT!
RELAX BUDDY. ILL WALK YOU THROUGH IT. I HAD THE EXACT SAME QUESTION IN MIND WHEN I WAS PREPARING MYSELF FOR THE EXAM.
THERE IS ONLY 1 "CCP LAB". THE CCP LAB CONTAINS 5 MAIN TASKS (GIVEN IN THE DUMPS), BUT CCP LAB IS ONLY 1.
THERE IS ANOTHER THING CALLED "CCP SIMULATION" , IT IS NOT PART OF THE CCP LAB.. IT CONTAINS 5 QUESTIONS (ALSO GIVEN IN THESE DUMPS), BUT THE ANSWERS "MAY" VARY IN THE REAL EXAM.
I HOPE I HAVE ANSWERED ALL YOUR QUESTIONS.
GOOD LUCK.

Guys Are there only 2 types of lab/sim/ccp questions whatever you call it these days? the 5 question ccp hotspot question and the setting up NTP config and ACL via CCP or Do I need to study for CAM overflow or any other lab other than that? I know answers will vary but I'm asking are those the only type of labs?

ALHAMDULILLAH PASSED TODAY. DUMPS ARE STILL 100% VALID. GUYZ/GALZ PREPARE CCP SIMULATION WITH CONCEPTS AS THE ANSWERS IN REAL EXAM VARY FROM DUMPS, BUT THE CONCEPTS STILL REMAIN THE SAME AS IN DUMPS.
ANYONE WHO IS TERIFIED OR WORRIED ABOUT THE EXAM DOESNT NEED TO WORRY. JUST GO FOR IT GUYZ/GALZ AS THIS IS ONE OF THE MOST EASIEST EXAM IN CISCO SERIES.
THANK YOU ALL FOR THE USEFUL COMMENTS & TIPS.MANY MANY THANKS TO MISHA FOR HER WONDERFUL CONTRIBUTION.
BEST OF LUCK TO ALL.

Thanks for the answer mate. appreciate it!

In Q73 of Misha's Q&A should be:
SDLC Phase 1 - Initiation
SDLC Phase 2 - Acquisition and Development
SDLC Phase 3 - Implementation
SDLC Phase 4 - Operation and Maintenance
SDLC Final Phase - Disposition

See: http://www.sitespower.com/training-dubai/course-cisco-ccna-security.aspx

Still dump is valid.......thanx lots of misha...

and practice?? are these labs http://www.securitytut.com/ still valid?? thanx

Guys in the Q73

answer of the dump says
init, implement, acqusition & devp. , disposition , oper. & manag.

but in CBT Nuggets Series Keith Barker was using this image
http://imgim.com/2763inciv5191319.png
So I'm confused of the order of the last two elements which one is true for the exam. Thank you.

Cleared with 927 Dumps are still valid no change yet go for it guys with out taking any tension. Clear the concepts of class map-out services a bit change in the options and NAT ips are changed dont get confused there if u minor practice it through dumps or real CCP u will definitely pass this exam. Misha very especial Thanx to you God bless you :) now pursuing for ccnp security.

I passed today with 9xx/1000 using dump only.

CCP froze so I missed 2 questions.

ALL questions from Misha's dump. I didn't have any new questions.

Now onto CCNP Route.

Hi,

I'm planning to take exam very soon,
could you guys please tell me apart from this dumps what else i need to study?
what about lab? is it same as the ones in the dump? or different?

I am sitting for the exam in about 8 hours. I will let you guys know how it goes.

Wish me luck!!

About all Question from Misha but some answers options are change like A on D and C on B. Read the answers carefully for correct selections. Wish you Best of Luck.

Thanks Misha, God Bless u I passed

hi all ,plz can you give me a website link to find the labs in the exam

Sorry for typo.. I meant to say correct compilation of exam.
Dump provided by Misha is 100% valid.

Passed 640-554 today with 979.
Thanks a lot Misha for wonderful and incorrect compilation of exam. It was only possible because of your unconditional efforts.
All the questions in exam were covered in this dump. Would like to share my experience.

1) I didn't receive window for deliver commands and save config check box during NTP and ACL simulation. I left my comment and moved on after completing config.

2) In one of the simulation where they asked for what IP address will be NATted by ACL 1, CCP window under Router-ACL- NAT didn't work. So I had to guess the answer. Not sure what to do in such cases.

Almost all the drag and drop in dump also appeared in exam.
I prepared by using Cisco official guide, GNS3 for CCP simulation and Misha's dump (everything free !!!)
Thanks Misha again. You are truly life saver :) God Bless You.

Passed today with 907 score. Two points,

1. As told many times in this post, be very careful when doing simulation. You forget one checkbox and click ok, you lose the complete sim. I lost it that way. So remember " do it slowly"

2. CCP questions: Learn where to see which paramater in CCP as given by Misha if you going to write only using this dump. In exam we see new answers as the config is fully changed. So learn it properly, do not memorize answers for CCP based questions.

Apart from that I got all the match the target question which is given in this dumps. So memorize it properly.

Thanks Misha. Cleared CCNA security because of you !!

Cheers,
Harish

Spend the 25$ to get the VCE license. It never expires and it will help you on countless exams.

Hello all, where can I get the VCE software to download for free so I can use it to view the exam files that are uploaded to this site. I need to take the 640-554 exam
Thanks and you can send me your answer at emmatx04@yahoo.com

pass today 948/1000
still valid..

Thanks Mr. Misha
Thank You Very Much

Passed my Exam 979/1000. Just did this dump nothing else. 70 Question was in the paper. All Question from this Dump. During the Paper you will not allow you go back to the question once answered.

If you just did this dump you will score 9XX plus. Best of Luck to all and Thanks a Million Misha.

Guys if you are using this VCE to pass your exam then please have Courtesy to atleast Thank Misha for her hard work and leave you valuable comments for people who are planning to take their exam.

Just finished writing the exam, scored 948. Dumps still valid.
Thanks Misha

Dumps is valid i cleared my exam yesterday ,100 % ques from the dumps.
score 958 in exam
did forgot 1 ans of 5 questions hotspot ,to select class map ccp-cls-2 or ccp-cls-2 ,did select ccp-cls-2 that was wrong class-map ccp-cls-2 was right got confuse in that other than that all went fine.

Hi Guys, After reading your comments I am going to try to do my exam today. I have just done this Dump nothing else. I will update how my exam went. But if I passed then I think anyone can pass.

Dump valid, Passed 969/1000

how to solve Q.116.?

just pass exam 927/1000 DUMPS still valid JUST ONE QUESTION OF DRAG and DROP

Passed today 958/1000

Dump valid, 979 (21.12.2012)

@Malangi Thxxx bro & best of luck

Thanks Misha!

May you be blessed in all your doings.

The Dump is valid.

Regards,
Ahmed

Thank you very much Misha for this dump. Today I passed my exam with the help of this dump. All questions where from this dump.

Hi All,

I just passed my exam with 970. I really thankful to Misha to complete this exam. All questions are from this dump. except the following one.

Which statement describes how the sender of the message is verified when asymmetric encryption is used?

A. The sender encrypts the message using the sender's public key, and the receiver decrypts the message using the sender's private key.
B. The sender encrypts the message using the sender's private key, and the receiver decrypts the message using the sender's public key.
C. The sender encrypts the message using the receiver's public key, and the receiver decrypts the message using the receiver's private key.
D. The sender encrypts the message using the receiver's private key, and the receiver decrypts the message using the receiver's public key.
E. The sender encrypts the message using the receiver's public key, and the receiver decrypts the message using the sender's public key.

Answer: B

Source: http://www.exam2home.com/640-554.htm

Check the Official CCNA 640-554 Chapter No. 10 Training
Lab A: Configuring ASA Basic Settings and Firewall Using CLI

Part 1: Lab Setup
Part 2: Accessing the ASA Console and Using CLI Setup Mode to Configure Basic Settings
Part 3: Configuring Basic ASA Settings and Interface Security Levels Using CLI
Part 4: Configuring Routing, Address Translation, and Inspection Policy Using CLI
Part 5: Configuring DHCP, AAA, and SSH
Part 6: Configuring a DMZ, Static NAT, and ACLs

Lab B: Configuring ASA Basic Settings and Firewall Using ASDM

Part 1: Lab Setup
Part 2: Accessing the ASA Console and ASDM
Part 3: Configuring ASA Settings and Firewall Using the ASDM Startup Wizard
Part 4: Configuring ASA Settings from the ASDM Configuration Menu
Part 5: Configuring a DMZ, Static NAT, and ACLs

Lab C: Configuring Clientless and AnyConnect Remote Access SSL VPNs Using ASDM

Part 1: Lab Setup
Part 2: Access the ASA Console and Prepare for VPN Configuration
Part 3: Configuring Clientless SSL VPN Remote Access Using ASDM
Part 4: Configuring AnyConnect Client SSL VPN Remote Access Using ASDM

Lab D: Configuring a Site-to-Site IPsec VPN Using CCP and ASDM

Part 1: Basic Router/Switch/PC Configuration
Part 2: Basic ASA Configuration
Part 3: Configuring the ISR as a Site-to-Site IPsec VPN Endpoint Using CCP
Part 4: Configuring the ASA as a Site-to-Site IPsec VPN Endpoint Using ASDM

Haha. Sorry for typing mistakes

Good luck:)

Dear all,

Passed today with 958/1000.

Preaparetion:

Official cert guide , CBT and train signal. In the end used my dump. Good lick to all off you and next>CCNP>pass:)
Ya

@Roshan
@Kitsoa
@Karachi
Dear all this dump is valid confirmed from purchase version Exam Engine , learn it without tension.
Going to take the exam in Next Week by Wednesday or Thursday will share my result and details with your guys.

@Kitsoa: Keep in touch I'm scheduled to take the exam on January 5th :) Hope for the best :D

@Sandosh

Good luck on your exam!!!! Please let us know how your exam goes. I'm scheduled to take the exam on January 4th.

Hi Misha,
could you download the .vce file external like you did with your other dumb too? Have the same mistake again that i cant open the file cause of the version issue..
And ty for your nice work!

Best Regards
CrazyD

Thank you very much misha.....is came port security lab???/?

Hi Misha,

Thanks for your wonderful work by uploading the latest dumps for this exam. :-)
I have booked my exam on this Saturday.I will let you know guys if any new addition in the exam..

@misha sry for the wrng comment. I was using the old version that is why I was getting the errors.

@Farhan: sorry farhan not ahmed :D

@Ahmed: u can email me dear at danish.umar@hotmail.com

@Misha, Thank you very much Misha, may you be blessed in all you do. . .

this file is corrupted.. can u plz post a new link..! thank u

Thanks a lot Misha :)

thanx misha for updates..appearing exam before saturday..
exactly how many questions area asked in exam?

Hi Friends,
Today I cleared My CCNA Security Paper with 9XX marked.
Firstly i thanks to Misha for their dumps & all the friend those sent their view in this portal.This forum is really helpful

All the question came in dumps.

Regards,
Amit P

Dear Danish,

Give me your mail address.

@Ahmed: See page 25 Chapter # 2 from Keith Barker u'll much clear with this explanation :)

@Ahmed

Yes this question has mistake. Mike from US is right. Ta

Hi Misha,

A quick one!

Secure Nw Life cycle D&D

Per the dump the options are:
1) Initiation
2) Implementation
3) Acquisition and Development
4) Disposition
5) Operations and Management

And as per the above comment /correction provided by Mike from US, the lifecyle stages are:

1) Initiation
2) Acquisition and Development
3) Implementation
4) Operations and Management
5) Disposition.

Can you pls confirm the right sequece as if I am taking the details from Mike, the dump shows the answer as Incorrect.

Pls help!

Regards,
Ahmed

@Farhan: May i have your cell number or email id?

One more thing i want to share with you i.e. there are not any save configuration and delivery buttons in Lab question. So when you press the OK button then all configuration will saved automatically. Even, once you select the the associate interface then you cannot change it. So please careful.

Dear All,

Passed with 9XX score. All questions were same (sequences were shuffled) + 1 new D&D regarding False Positive, False Negative, True Positive, True Negative.

Simlet was belong to CCP old version so need to be focus accordingly.

1. You cannot find answer of "which four properties are included in the inspection Cisco Map OUT_SERVICE?" because most option are disabled. So please follow the dumps answers.

2. What is include in the Network Object Group?
Answer: 192.168.1.0/24 & 10.0.10.0/24

@Misha: Thanx a lot millions of prayers for you :)

@Mike

Uhh. You are right, it has mistake. Did not pay attention:(

Umm I was at the Secure network lifecycle D&D and according to the new study guide by keith barker and scott morris the 5 phases are initiation, Acquisition and development, implementation, operations and management. disposition

Thank you Misha!

Regards,
Ahmed

@Ahmed

Yes, it is just couple D&D questions and CCP lab in details. Good luck

Hi Misha,

I have completed the previous dump uploaded by you, are there any major changes or just 5 new D&D have been added.

Pls confirm.

Regards,
Ahmed