Pass Your Microsoft 70-680 Exam Easy!

i download this dump , but ii is made in 23.09.2012. not 1 november 2012

Just passed, with this dump! Thnx!!

Dear All

i need that answer this questions

One about running a a program in compatible mode for Windows 98 and setting 256 colors?
One about enabling IPv6 on the network adapter?
One about importing a websites certificate to the computer's personal store?

Pass this morning 1h ago. 960/1000. This dump was a key.
But check correction list Gill Beast made 1.nov. 5Q came from that list !!!!
All the question came from this dump.. exactly, literally.
Thak you so much Gill Beast !

100% valid dump in Germany. Just passed with 880. I think maybe one question that wasn't on the dump but could be easily solved with some Win7 knowledge.

@ wikki1977
See the votes and comments for this dump and you know.
But don't ignore the corrections I made Nov 01 2012. See below.

All the answers are correct in this, and please tell me which dump i should study to pass this exam

@a querty
There are still four duplicates in my dump and you discovered one.
Yes, Q209 and Q335 are nearly the same. Q335 comes from the MaxBox dump, Q209 from the Buzz dump.
Since the answers are the same, I deleted Q209 in my latest dump.

@Gill
Should the answer of the question number 335 be the same of the 209?

Tooked exam today in the netherlands passed with a 800. dump is still valid only a few new questions.

search on youtube vce 3.0.1 and check the first one ;-) download and it wil fix your problem

thanks gill i got 900 marks yesterday at 13 nov 49 question in this dumps

Wrote this morning..got 820 out of 1000.
Exam had 50 questions. This dump is 100%

@ Lesh
Since the dump has still been valid in Iceland and South Africa today, it's also valid elsewhere.
And as you can also read in the comments, it's still sufficient to pass the exam.
But don't ignore the corrections I made Nov 01 2012. See below.

Passed today with 900 in score. This Dump is 100% valid. Thank you Gill Beast! Study exams from Buzz, Maxbox and Mskiller.

i wrote today and all the questions came out, unfortunately i didnt study enough but this dump is on point!!!

I am writting on friday and i will be writting this exam for the 3rd time. i failed my 2 exams. I need advise how to study and which exams are valid in south africa

Going to the exam tomorrow, learnt all the questions from Buzz and Maxbox I thought the MSkiller answers were not right all the times and they just confused me. Atleast over 300 questions are in my head :) Hope it is enough to pass the exam, wish me luck :)

passed today with 940. dump is 100% valid, maybe 1 new question, not sure it mightve been in the dump. but yeah study this dump and you will do good. thanks gill

@Oemie. Which 200 Q's did you study? I have my exam on Friday and was curious which questions mainly will be given.

Cheers to Gill already for giving me this study material;)

100% Valid passed today and i only learned from this dump. Didnt even read the book. And learned only 200 questions from the 400.. nice dump ty

@roy

Buzz this section MAxBox dumpta have dumpları MSkiller I walked out which of the exam will offer Encode according to him, will concentrate in my studies

i got my exam 860 ))))) all ques from this dump thanksss Gill Beast alotttttttttttttttttttttttttttttttttt

Hello everyone

I have worked test yesterday this is a very good choice and I would recommend everyone using it

@ Jorge
Congrats!
Do you remember the missing questions?
One about running a a program in compatible mode for Windows 98 and setting 256 colors?
One about enabling IPv6 on the network adapter?
One about importing a websites certificate to the computer's personal store?

passed today with 800, test with 50 questions, 48 from here! thanks Gill Beast

Very..very valid 820. Studied this and CBT Nugget videos. Gill Beast you are a god among us mere mortals!

Yaahooo!!! Gilli Gilli Gilli you are the Best Buddy.. :)

Passed today with 800 marks, dumps were 110%

Passed today with 880 marks, dumps are still 100% valid in Pakistan.
to make your exam easy try this out.

Passed today with 820/1000. 100% Valid.Thanks guys.

@ 1-nda SA
Go and buy the latest Visual CertExam Manager or even the Visual CertExam Suite.

And to quote Porpoise Hork: This will probably be the best $30.00 you will ever spend, especially if you plan on going for multiple certifications. It's a one time fee and you get both the manager to take the tests but the designer to update the dumps with corrections.

Passed 880. Studied Poulton's and McLean/Thomas books (both books a few of gaps) and this dump. Nice work.

passed with 820, study this only, thanks for the great work!

960 pass today, studied this and Cooper. Thanks

Pass today 100% valid pass with 920 2 questions has different answers. Just have to read them

@ Jimmy

the answer is B.

http://www.howtogeek.com/58103/how-to-automatically-change-your-default-printer-based-on-your-location/

GP will determine what printer a user or group of users will use by default, but will not change this if they happen to office out of multiple locations. If they do this they will no longer be on the local domain and thus do not have access to it resources unless they are on VPN, a direct Access link or RDS. When they connect to the local network at a branch office their GP mapped printer becomes unavailable (greyed out) but is still set as default.

http://technet.microsoft.com/en-us/library/cc731292.aspx

Great dump. Passed with 840

Guys plz just wana know wich answer is correct between this 2
Q- you need to ensure that documents are printed automatically to the correct printer when the sales employess travel to a branch office.

Which answer is correct between
(a)Link the GPO of the branch office to the sales Computer Ou
(b)From the Device & Printer, Select Change my default printer when i change network.

Nice dump. Passed with 740

Great dump. Passed with 800

This is a great dump. All questions are from here. Passed today with 780. Thanks Gill Beast and All

@Kolderitus

just remember taht not knowing something dosent mean not knowing everything

the dump is very valid i passed and score yesterday 960 thanks Gill Beast for the nice dump

I have downloaded your dumps Bill Beast and i will study from your dumps and soon i will attend exams of it and i will surely give my comments soon prey for me that i will pass my exams.

Dump 101 percent valid got 940.Every question was in this dump.The only thing you need to worry about is the multiple choice answers they are not the format as the dump.

@ Asim Sohail

Really? This will probably be the best $30.00 you will ever spend, especially if you plan on going for multiple certifications. It's a one time fee and you get both the manager to take the tests but the designer to update the dumps with corrections.

100% valid in Greece. All the questions where identical. Passed today with score 940. Gilli you are the Best!!!!!!

hi every one I'm from Egypt . First i want every one from Egypt or from any where don't worry and study this dump because it's 404 q so it's the biggest one in the number of q .and plz we need any one get the exam say his score and the number of questions and from where is he or she and what's your opinion or your advise .

this Dump is 100% valid in Afghanistan.passed today 800

Still valid. Passed with a 960 today.

I had about 15 "simulation" style questions. Be sure to study those if you're using the mobile version of VCE.

@ kaptan
yes, it is.
Link-local IPv6 addresses are equivalent to IPv4 addresses allocated through APIPA . You can identify a link-local address by an FP of 1111 1110 10, which is followed by 54 zeros (link-local addresses always begin with fe8) . Nodes use link-local addresses when communicating with neighboring nodes on the same link.
You can implement IPv6 connectivity between hosts on an isolated subnet by using link-local addresses. If you use link-local addresses, you need to specify their interface IDs - that is the number after the % symbol at the end of the address.X

i passed the exam taday with 960 marks. :-)

i passed the exam taday with 800 marks. this dums is 100% valid.all question in the dums.thanks gill

100% Valid in south africa

My query relates to Q73, 2 computers with IPv6 addresses.
I need to test the connection from comp 1 (address ending with 10) to comp 2 (address ending in 12). The answer says ping -6 (address ending in 10).
Is that correct?

This is still vaild 49 question same as the exam, i passed yesterday with 940, Thanks god.

workng in srilanka. passed the exams

@ Porpoise Hork
Thanks for the comment. And still nice to have you here, since you already successfully passed this exam.
@ Sqid
Porpoise Hork is right. The answer of Question 328 is correct. But if look at question 342, which is very similar, the answer is K: Run the Dism command with the /Add-Driver option.

@ Squid

G is the correct answer for this question because it asks "What should you do first?"
Due to this single question have to mount the image before you can service it with any of the /add cmdlts.

Be sure to read the questions completely as some of them will ask you this and some will not. If you miss that one little part of the question you will get it wrong.

Q328

you need to update he image with the new driver of the network card

I think the answer is F and not G

http://technet.microsoft.com/en-us/library/dd799258(v=ws.10).aspx

can someone confirm this

Passed today. Reviewed this dump only. Thanks to Gil, Maxbox, Buzz, MSKiller! :)

Passed today using this dump. It is still dead on -had two questions that were not on here but very similar. I had 50 questions and scored 820.

@ Site Admin
thanks for always cleaning up.

Passed today with 840 score, thank you, Gill Beast

This dump is 100% valid, Q=50 with 860/1000

@ ahmedg
Kolderitus is absolutely right.
And you should also know something about VCE Manager, otherwise I can't follow the question numbers you refer to.
Make sure to get the right sequence of questions and answers. In VCE Manager use the Options, click the General Tab and clear the Randomize questions and the Randomize choices check boxes.

passed today with 820 used this dump and watched prof messer training videos

thanks to Gil, Maxbox, Buzz, MSKiller

@ahmedg
don't you think you should know something about win7 before going into exams???? Boot.ini isn't used anymore!!! bcdedit.exe is correct.

@Gill Beast

in Q262 it says you have a vista & windows 7 OS on a computer which file to be edit it to force the PC book vista as default
the choosen answer is bcdedit.exe but i think the correct answer is the boot,ini as it contant the boot records

there is no figure in Q260

@ dhana
My dump was done with VCE Designer 2.6 and it is still compatible with VCE Designer portable versions 1.9.815, 1.9.954, and 1.9.985.
But if you want to get rid of those problems, go and buy VCE Suite 3.0.1. It's worth every Cent.

This gills dumb is not working in vcem. How can I open it.pls sumbdy help me to prepare for my exam.I vill be greatfull to u friends.

I am amongst others studying this dump before this coming Mondays cert. Hope it is still valid :-)

passed today with score 840 all questions from this dump only one new question

@ Porpoise Hork
@ Suraj
Sorry, my comment below should have been adressed to you.

@ Porpoise Hork
@ Bharat
We got to encircle the right answer(s) from what we know.
TMP chip:
not needed for Bitlocker To Go.
GPOs:
not necessary needed for Bitlocker To Go, but can be used for example
- to enhance the encryption from 128 Bit AES to 256 Bit
- to allow another form of authentication such as a startup key
- to allow users to write data only to storage devices that support Bitlocker To Go
- to allow the use of the device in read-only mode with computers running Windows XP and Windows Vista
EFS:
not relevant.
So I agree with you, the answer(s) must be:
- perform a clean install
- encrypt the USB drive by using Bitlocker To Go.

Thanks for thiis is best way to preparation exam

@Propoise : Yeah i too got this same thing in my examination bitlocker ques . But can we able to do that with the bitlocker-to-go option . I too selected that answer But i'm not still satisfied with that

@Gill : Make sure that the answer is correct so that they can have a clear view of this ques !

Still valid! (100%)

@ Gill

Thanks. This dump was the key to passing this cert.

I can't remember the wording but it was very similar to Q.381. It was asking about ensuring Bitlocker-to-go was able to work on a single machine that had XP on it but is going to Ultimate but it did not have use bdehdcfg.exe as an option.

Two options that were there was verify TPM chip and wipe the partition and do a clean install of W7. The other two options were talking about GPO and EFS

Based on that I selected clean install and encrypt the USB with Bitlocker-to-go.

Passed this morning. Every question included in this dump except that compatibility question.
Danke an Gill Beast.

@ porpoise hork
Congrats! Do you remember which the new question was?

Thank you gill. got 860 today ! No Question's out of this.. 101% valid dump :D

just took the exam and pass with 940. one new question. great dump!

Just took the exam and passed with 820 using this dump only. There was one new question not on this dump. So it's 99% valid.

@ Dane and Don.

This dump opens perfectly for me with VCE Manager 3.0 and 3.01 As well as the Droid version 6.7.2. double check what version you have and update if possible.

@ Anonymous
Thank you for the hint. In fact all the corrections are gone, since the comments have been shortened. So I do a copy & paste of the comments that have already been sent to some guys:

The Gill Beast dump includes all questions from the dumps of Buzz, Maxbox and MSKiller.
It has three questions missing from the Cooper dump, that could be answered with a little knowledge:
1. Question about running a a program in compatible mode for Windows 98 and setting 256 colors (recently found in Petar's exam).
2. Question about enabling IPv6 on the network adapter.
3. Question about importing a websites certificate to the computer's personal store.
On the other hand it has more than 40 questions that you don't find in the Cooper dump.
Before making corrections to the dump, make sure to get the right sequence of questions and answers in your VCE Manager.
Use the Options, click the General Tab, and if not yet done, clear the Randomize questions and the Randomize choices check boxes.
If you can't open the dump with VCE Manager, go and get you an actual version.
The corrections are:
Question 75 - unwanted changes
Answer must be: B
Question 209 - dual-boot configuration
Step 2 must be: Launch a Windows 7 installation from within Windows Vista by using setup.exe.
Question 264 - winrm service started
Answer must be: B
Question 296 - advanced audit policy configuration
Answer must be: C
Question 318 - cache and share files
Answer must be: H
Question 333 - daily update
Text must be: You configure the client computers to run Branchcache in distributed Cache Mode (not my fault)
Answer must be: B
Question 334
Answer must be: A
Question 378 - migrate a user profile
Answers must be: Protocol: HTTPS and Port: 9999
Question 387 - redirection
Answer must be: D
Question 388
Answer must be: D
Question 392 - list of users
Answer must be: D
Question 395 - event forwarding
Answer must be: D

This dump has all the questions that came out in the exams!Passed!Thanks for the help!

@Gill : you mentioned that some corrections have been made on oct 18th . But nothing is showing on the comment list. please make sure that you post it soon because tomorrow i am having this exam !

Passed today - 840/1000
The Questions are still valid.

@Gill Beast - thank you a million, great job!

@Sherif - got 50 questions not 80 in The Netherlans!
145min time and not 100min.
Good luck with your second round ;-)

100% valid.thanks

It works fine, just install the new version of VCE in the same folder as of the existing .exe file (it will overwrite the old file) the icon will change to the new one and u can open the Gill Beast file in it.

Passed today in Serbia with 960. Only 1 new sim, with compatibillity, you need to set the app to work in Win98 and with 8 bit (256 colors).
First, many thanks to Gill Beast for this great dump, and also thanks to Steve, Dave, Andreas and all on this topic who worked on corrections

This is a valid dump in the USA I just passed it today studying only this, just about all the questions were from this dump.

hello Andreas;
one of my mistake i am not study all the dump i know and i will make favor for you and study all :), also the dump is valid i hope still until i take the second shot all the question i answer it was from the dump

@ To Sherif
I don't understand your strategy.
If you use Gill's dump and take only the first 300 questions, you miss all questions from the MSKiller dump, that are neither in the Buzz dump nor in the MaxBox stuff. And since MSKiller is still a valid dump that maybe the reason for your failing.
Please do me a favour and learn all the questions before taking your second shot! And good luck!

@ Voyager from Holland
Q388
Answer is D. Please see corrections already made below!
Q209 and 335 (nearly the same) have the same answer: Launch within Windows Vista by using setup.exe. Please see corrections already made below!
Q334
Answer is correct, other dumps are wrong, because:
1. Wecutil is used to configure Server1 to collect events
2. Executing WinRM quickconfig on Client1 does the following:
- Starts the WinRM service
- Configures the WinRM service startup type to delayed automatic start
- Configures the LocalAccountTokenFilterPolicy to grant administrative rights remotely to local users
- Configures the WinRM listener on http://* to accept WS-Man requests
- Configures the WinRM firewall exception
3. The computer account of Server1 is used to access the event logs. Therefore it must be added to the local administrator group on Client1.

Passed today - 840
Questions are still valid.
Thanks a lot

thanks

Pass i got 948/1000 today, valid dump.
JazakAllah.

100% valid in India, few of the answers are wron got 840/1000

@Gill

- Print automatically in Branch office.
Question 388 your dump is the answer: C

Same question on dump Microsoft.BrainDump.70-680.v2012-10-22.by.doogie.29q.vce
Question 26 is the answer D

Can you please review and provide me the correct answer. I am confused.

Thanks in advanced!

Passed today with 910, valid dump.

@Gill

You wrote regarding question 209
- dual-boot configuration
Step 2 must be: Launch a Windows 7 installation from within Windows Vista by using setup.exe.
(even though I would never do it like this)

Found the almost same question 335 - dual-boot config.
Believe the answer should be the same as 209 right?
Step 2 must be: Launch a Windows 7 installation from within Windows Vista by using setup.exe.

Question 343 - Source-Initiated Subscription.
According to other dumps the right answer:

Server1
Client1
Server1 (this drag and drop is empty)
Client1

Thank you ceilingfan , i hope it's valid also for the next exam
Nomrally it's eligible second try but because they not give me the time same like They send me 3 hour maybe they will be honest with me
Regards

Well that might be the cause of your issues :)

Hopefully it'll still be valid for your second shot! Did you sign up for that? Hopefully it's eligible in Belgium as you get a free second try if you input a coupon during when you originally signed up.

Good luck with the resit!

ceilingfan: maybe you right also i am not finished the dump but i study near 300 question it's a lot also

@Sherif: have you gone through every single question though? How long did you spend on this dump? If you failed, it may be because you didn't spend that much time on it, no? Or am I wrong?

What were the new questions regarding?

i did not passed to day :( but the dump is work i make vote for the dump but they give me 100 min only and it was some new question aslo
please guys anyone give me anther strategy becuase main it don't work
sailing_15@yahoo.com
waiting the advices
and the for andy he try to help me

Writing my exam tomorrow in the UK.

Hope these dumps are still valid.fingers crossed

Here the list of the exam which expire in July 2013..www.microsoft.com/learning/en/us/certification/cert-lifecycle.aspx#tab2

Taking my cert on Halloween, but I used this as my main practice exam and got 730-780 each time. Very nice! Thanks again!!

@Gill Beast

Got now installed the register version of VCE Suite 3.0.1.
This resolved all my problem to open this dump and others, but still nice to review some questions from MaxBox :-)

Thanks

@ Khurram
This question has already been discussed. Please read the corresponding comments below.

Q:334. according to me,the right answer is A. below is the Q
Your company office network includes a file server that has Windows Server 2008 R2 installed and client computers that have Windows 7 Enterprise installed. The computers are members of an Active Directory
domain. The file server has the BranchCache feature installed.
The client computers have a third-party firewall application installed.
You configure BranchCache on all computers to run in Distributed Cache mode.
You need to ensure that the client computers can access all cached files.
What should you do,

m i correct.? Can any 1 confirm?

@ Maxi
My dump was done with VCE Designer 2.6 and it is still compatible with VCE Designer portable versions 1.9.815, 1.9.954, and 1.9.985.
But if you want to get rid of those problems, go and buy VCE Suite 3.0.1. It's worth every Cent.
@ Voyager
No need to re-upload. All MaxBox questions are in this dump. But please read the corrections below.

Can some one re-upload the non-answered questions on (Drag and Drop) Share http://maxbox.maxlc.com/Exams/70-680/DB-2

I need to fogus more on this, sure I get this in my exam next Thursday.
Match Appriciated @serbia

Used this with mskiller / maxbox. Still good dumps as of Oct 24th.

@Dave

Thanks a lot for clearing that up! I'm gonna go ahead and take my MCITP based on your comments.

@waffle apple:

The 70-680 (MCTS) exam is not retiring, so you will still get the MCTS certification if you pass this exam. (Also applies to 'Windows 7 desktop support' students).
As far as I'm aware the 70-686 exam isn't actually retiring in itself and it as also been mentioned here: http://social.microsoft.com/Forums/en-US/CertGeneral/thread/2e8c94e1-255d-4919-a013-4413357bb7e0

It is the 'MCITP' certification name that you won't get if you pass both exams after July 31st 2013.

So combining 70-680 and 70-686 won't give you the 'MCITP: Enterprise Desktop Administrator on Windows 7'.

So what will you get after July 31st 2013?

(Pass 70-680) = MCTS: Windows 7, Configuring (same no change).
(Pass 70-686) = Pro: Windows 7, Enterprise Desktop Administrator. (Basically this qualification will just be 'Pro: Windows 7, Enterprise desktop Administrator').
As of now it is still worth pursuing if you are on this pathway!

Remember Windows 7 is the defacto standard in business environments and will probably be for several years to come.

@Martin:

Forgive me, I did not realise the Maxbox questions within this dump were infact from http://maxbox.maxlc.com/Exams/70-680/New/ in which case this dump was 100% valid for me.

I passed a few days ago and studied for 2 months. I looked through the first 100 questions and I did see some of them on my exam. If I had looked through all of it, I'm sure that these questions would be on the exam.

My issue was that after I passed, I found out that the MCTS/MCITP is being phased out again for the new "solutions" MCSE/MCSA. Does anyone have any information about this? Do we automatically get transferred to the new titles? It seems wrong that people study for these for months (the guy with me studied for 6 months) and their certification would be phased out anyway.

@ Gill Beast
@ Dave
I'm a little confused about Dave's comment about the content of Gill's dump (70 % from Gill, 30 % from MaxBox),
Because in the description of the dump I can read that 98 MaxBox questions (jpegs and pdf) are included. Are there newer MaxBox questions and where can I find them?
The adress shown under Someone from United Kingdom has no new questions.

Does anyone know how often Prometric update their exam question base?

I'm writing at some point in November so just wanted to know if I'll be safe or not.

Anyone got experience of the frequency they update it?

This dump is 100% valid. Got passed with high score.
Thanks a lot GILL!

@serbia

http://maxbox.maxlc.com/Exams

100% valid.Got 900/1000.All questions were from this.

Thanks a lot.

Dave, can you point us to maxbox's new PDF and JPEG files?

Passed today with score 840 did some silly mistakes
Dump 90% valid only one question was new!

Great job on the dumps!
A very straightforward guidethrough in the exam is also provided here
http://itfreetraining.com/70-680/windows-7/

Passed my exam today with a score of 900 :)
Still valid. Probably about 80% came from here with about 5 new questions.
Thank you so much Gill. Good luck to everyone taking this :)

Passed today with a score of 800/1000 at a London Prometric test centre. This dump is very valid, 70% of questions from here and other 30% were from Maxbox's new pdf and jpg files.

Thanks to all who contribute to making these, was a big help.

Just back and passed, a massive thanks to Gill and Andreas from Germany. The corrections were great as three q's came from them.

to those about to take the exam, use this dump (With Corrections) and learn the answers as they do appear in a different order, I got 820 but was really nervous

thanks again

still valid, I just passed in Czech Rep. with 920

Passed yesterday @ Hendo you correct. Dump 100% valid. Question with selection from a-g were very frequent.

@ Steve
I send you a summary of the necessary corrections. It's the original Gill Beast corrections. Watch your spam, because I use a dummy mail address.

thanks man :)

@ Petar
Yes, you're absolutely right. Answer of Q334 must be A. Configure firewall exception rules.

@ Sherif
Yes, to find out if winrm is running on another computer you gotta use winrm id - remote:another computer.

@ Kingbenny30
Yes, if a dump is valid in the USA, it's valid in other countries too.

@ Chennai guy
To get rid of those compatibility problems, I suggest buying the latest version of VCE Suite. It's inexpensive and it's worth every cent.

Passed today, 90% (maybe more) of my test question came from the last 150 question of this dump.

2 to 3 interactive questions

5 or 6 series questions

Great Dump Gill!

Gill, question 334 should be a) Configure firewall exception rules . ?
Dump lists the correct answer as e) because in the explanation it says that authentication should be set to none since the computers are in workgroup
BUT
Question says that they are members of AD?

Gill Beast:: my answer is wrong ???

@ falcof
Q388:
Answer must be D.
From Devices and Printers, select the Change my default printer when I change networks.

And once again:
Q264:
Answer must be B.
At the command prompt, run Winrm id -remote:computer2.
Please read below, I've already corrected this questions.

I pass today with 880/1000 score.in israel
this dump 100%. all question from here.
Thnks gill beast

falcof from Belgium
the answer A.
At the command prompt, run Winrs -r:computer2 query.
i am from Belgium also :)
good luck

Hi,
If a dump is still valid in one country does it mean it's still valid in another? Or does it not work like that? I have my first exam tomorrow.
Thanks.

Thanks Gill. About Q 388, You need to ensure that documents are printed automatically to the correct printer when the sales employees travel to a branch office.
Are you sure of the answer C : Link the GPO of the branch offices to the Sales-Computers OU.

Thanks for your help

@ falcof
Q264: answer is B
@SL_guy
Q75: answer is B
Please see my corrections to 10 questions below.

@falcof : Answer could be B

Hello guys, what is the answer for this question :
You have two computers named Computer1 and Computer2 that run Windows 7. Computer1 is used to remotely manage Computer2. From Computer1, you need to verify that the Windows Remote Management (WinRM) service started on Computer2. What should you do?

A.
At the command prompt, run Winrs -r:computer2 query.

B.
At the command prompt, run Winrm id -remote:computer2

C.
From Windows Powershell, run Get -PSSession Computer2

D.
From Windows Powershell, run Get -PSSessionConfiguration Computer2

@ Tim
VCE player (v1.0 for OS X) is not reviewed very good. It can only handle Multiple Choice questions, no Hot Area and Select & Place questions and probably it's not compatible with VCE files created with versions 2.6 or greater.
Instead take VCE Suite (any VCE Manager should work) and a Mac Software called Crossover (there's also a 30 days demo version) to get VCE Suite running.
Or use Virtual Box Mac (Open Source), install Windows XP or Windows 7 and install VCE Suite, but that's a lot of effort to get VCE Suite running.
But what the heck are you doing with that Microsoft stuff on a Mac?

@Gill : What is the exact answer for Q:75? You have mentioned as B but modifying the UAC may be harmful for the system.Please reply as soon as you can. Thanks!

@gill beast,kindly suggest what to do regarding Visual CertExam Suite.When i tried to open it is showing error.Is there any new version available free so that i can prepare for 70-686 exam.if so,pls mention the link

I tried importing this dump into my VCE player (v 1.0 for OSX). When attemping to view the exam, I get the following error: "Error on loading exam: This version of VCE format is not supported. Please update the software to the latest version."

What do I do?

@Andreas from Germany -

Thank you.

Were there many wrong and are you able to send me them to look at?

the numbers that Gill kindly put on here dont seem to correspond with the question when I look at it. Were there many wrong?

mail address is s.alison@btinternet.com

thank you

@ Doogie
I can't explain where these compatibility problems come from. I only realize that anytime between versions 2.8.1 and 3.0.1 changes have been made by Avanset to prohibit the opening of new files with old managers.
But since I create my dump uploaded here with v2.6, it must still be usable with older managers.
Btw, I thing the error message that appears is wrong. It should be: "This files was created with a n e w e r version than you have. Please download the latest version.

@ Steve
II only used the Gill Beast dump, but I corrected those wrong answers with VCE Designer for better learning.

@ waffle apple
This dump includes all questions from the dumps of Buzz, Maxbox and MSKiller.
It has three questions missing from the Cooper dump, that could be answered with a little knowledge:
one about running a a program in compatible mode for Windows 98 and setting 256 colors,
one about enabling IPv6 on the network adapter,
and one about importing a websites certificate to the computer's personal store.
On the other hand it has more than 40 questions that you don't find in the Cooper dump.

@ Steve
Concerning corrections made with the help of Mark:
With the corrections of those 10 questions the dump should have been without wrong answers, but now I know better:
Q 388: Answer must D

@Andreas

Congrats, I have mine on Friday so studying the Gill Beast Buzz/Mxbox/msKiller is good enough in your opinion?

thank you

@Gill, read all the post I see now where Q 310 = Q318

Passed today with 910. Dump 100 % valid.

Gill, I'm using VMware VCE Designer portable versions 1.9.815 but will not open for me. Says created in newer version that I need to update my verison.

Still get dump, Thanks

On your 18 oct comment:

Question 310 - cache and share files
Answer must be: H

310- I only has A thru D answers.
Question is about- users ability to update drivers for display adapter.

im studying for this exam and planning to take it this week. should i use this dump or some of the newer ones like doogie or cooper?

@Gill Beast

thank you bery much, are you referring to all the answers under the heading With the help of Mark from Germany ?


Question 75 and so on?

thank you

@ Steve from UK
Imho all you need is this dump.
It combines the questions from Buzz, Maxbox, and MSKiller.
But please consider my correction of some wrong answers shown below.

@ Doogie
I currently use v3.0 distributed by Avanset because I've unfortunately updated constantly.

That was no good strategy, because Avanset versions of VCE Suite are not downward compatible anymore.

But I think my dump still is. because I was able to open it with VCE Designer portable versions 1.9.815, 1.9.954, and 1.9.985.

Gill Beast, I was trying to open this file with designer so I can correct answer you talked about on 18 oct, but unable to open in designer. What version did you use? I have 1.9.815

Great vce thanks

I am taking this exam Friday, Been using this dump, anything else I should use or will this pass me? Get 95% of the 400 correct

@ Anon
Right, the dump is not updated, but the correct answers are all given in my comment of Oct 18 2012. So you may please change it yourself.

@ anon from Israel. Looking at the dump's properties, he has not updated it with the corrected answers. So just be aware of them so you are sure to know the correct answers.

Thx for help

u fix all the worng questaion or i need to edit and change ty :)

@ Luis
btw: correct syntax is: ipconfig /flushdns

@ Luis
The ipconfig /flush dns only empties the DNS cache, it does not modify the hosts file. Since it's a simple text file, you gotta do it yourself.

@ Falcof. I've personally experience that issue before. I googled the error message Internet Explorer was giving me and used the ipconfig/ flush dns method. It fixed the problem. Also you want to check your computer is set to current date, and add the site certificate to your trusted zones. Hope this helps.

Dump 100% valid, only studied this and passed with 760. Questions missed are questions I forgot answers to. Good luck all

@ falcof
I refer to my buddy Thomas (GBG), who has already answered this question:
The answer is D.
To configure the SmartScreen Filter as often seen as the answer, is not necessary; it is already running, otherwise you wouldn't have received that alert.
It's most likely that the hosts file has been manipulated by the malware, and that it contains a wrong IP Address for the domain name of the financial institution's Web site.

Hello, what is the good answer for this question ? A computer that runs Windows 7 becomes infected with malware.

You scan the computer, remove all detected malware components, and restart the computer.

When you attempt to connect to a financial institution's Web site, Internet Explorer redirects to another Web site and displays an alert that the Web site may be a phishing site.

You need to prevent the computer from being redirected to the potential phishing site.

What should you do?

A.Configure the SmartScreen Filter.
B.Run Ipconfig /flushdns.
C.Configure InPrivate Browsing.
D.Modify the hosts file.


Thx for your help.

Amazing dump ! I passed yesterday with 880/1000 score. Valid in Brazil
Tks guyz

Passed today with 760/1000. dump is very valid. Thanks :)

I pass today. this dump's 100% valid. thanks alots Bill. ;)

Thanks Gill Beast! I'm new to VCE software.

@ SL_guy
Change the settings of VCE Manager.
Use the Options, click the General Tab and clear the Randomize questions and the Randomize choices check boxes.
Now you can follow the sequence of questions and answers I refer to.

@Gill Beast : I hope to take the exam soon and doing your valuable dump.You put some answers should change with question numbers but questions will shuffle when we are doing the dump.So please put the new answers with related questions. Thanks!

Passed yesterday. All questions from this dump. Thanks.

passed exam today with 960 marks.thanks gill beast.100% valid dump

100% valid. failed today 640/700 :'( but questions were all from this

@ashraf
Your right, must be 318 not 310:

Question 318 - cache and share files
Answer must be: H

THIS ONE not exists
Question 310 - cache and share files
Answer must be: H

I passed the exam today 880 marks...This dump 100% valid

@chennai guy
To my knowledge: yes.

@Gill Beast,is all the answers relating to branchcache are correct in Gillbeast dump.pls update urgent.tomorrow i am writing exam

With the help of Mark from Germany (watch his result below) this dump now gets correct answers:

Question 75 - unwanted changes
Answer must be: B

Question 209 - dual-boot configuration
Step 2 must be: Launch a Windows 7 installation from within Windows Vista by using setup.exe.
(even though I would never do it like this)

Question 264 - winrm service started
Answer must be: B

Question 296 - advanced audit policy configuration
Answer must be: C

Question 310 - cache and share files
Answer must be: H

Question 333 - daily update
Text must be: You configure the client computers to run Branchcache in distributed Cache Mode (not my fault)
Answer must be: B

Question 378 - migrate a user profile
Answers must be: Protocol: HTTPS and Port: 9999

Question 387 - redirection
Answer must be: D

Question 392 - list of users
Answer must be: D

Question 395 - event forwarding
Answer must be: D

Once again, thanks Mark!

And once again: all the Buzz, Maxbox and MSKiller stuff is included in this dump!

17-10-2012 I have passed the exam and get score # 740. This file 100 % Valid , Plus u need to stduy BUZZ, MSKILLER & MAXBOX.
Then 100 % Gurrenty

hi friends,which dump having correct answers maxbox or mskiller.very contradicting answers regarding branchcache in both.suggestions please

Passed today with 900! Almost all questions came from this exam; nearly word for word folks.

Passed the exam today. This dump is 100% valid. Thanks Gill Beast.
All answers in MaxBox can find here. Best of luck peeps!

Valid dump, Passed today with 860 mark. Thanks Gill Beast:)

I just passed 70-680 ( in german) with a score of 970.
50 questions / 120 min time.
All questions from the Gillbeast Dump, except 2-3 new ones.
Some questions / answer options twisted/reworded. My only errors were in access to resources.

I remember one from Cooper section of Gillbeast dump about importing a self signed SSL Cert
to the computer store. Another one was about how to list encrypted Files ? or cert files with choices
1) cipher -c:data (syntax wrong!!) 2) dir /oe 3) fsutil.exe 4) can't remember anymore :( I answered wrong.
There might be some errors in Gillbeast Dump
I found around ~ 9 but very valid dump indeed.
Thanks Gillbeast, Maxbox, Buzz, MSKiller !!

i'll take tomorrow.

I passed exam on 15.10.2012 with 900 marks.This dump is 100% valid.

I passed the exam this morning with 840 marks.It's good this dump.

I passed exam on 13.10.2012 with 920 marks.This dump is 100% valid.

Passed the exam with result 740/1000 , it's a good dumb to study dudes , study hard . Good luck .