Pass Your Microsoft 70-341 Exam Easy!

"Trey Research"

"You need to ensure that users can create new public folders when EX4 is unavailable".

A. Run the New-Publicfoldermoverequest
B. Add Ex4 to DAG1
C. Create a new public Folder Database
D. Run the new-moverequest

Correct Answer: B
Add the mailbox database server to a dag to ensure its availability if a mailbox server fails.

Trey Research

"You need to recommend a solution to prevent domain controller from overuse"

A. Set-ExchangeServer
B. Set-OrganziationConfig
C. Set-ADServerSettings
D. Set-AuthConfig

Correct Answer: A
use the set-exchangeServer cmdlet to configure static domain controllers

Topic 4, A.Datum
"You need to recommend a solution for the new yourk office that meets the technical requirements for client access.

What should you recommend?"

A. DNS round robin
B. Layer 4 hardware load balancer
C. Layer 7 hardware load balancer
D. Network load balancer feature
E. Client Access Server Array

Correct Answer: B & C

Client access arrays were only used in exchange 2010. Client access array is no longer used for exchange 2013.

hi every1 plz let me knw if this dump is still valid

Fail Today 650

Passed Yesterday with 842. Dumps Still Valid

Good questions but lots of wrong answers use LATASHA as below - I passed with 860.

Microsoft.Certdumps.70-341.v2014-06-27.by.LATASHA.190q.vce

Thanks all!

got 780/700 today. still valid

I'm pass with 740.

The exam is %100 valid in Turkey. I passed this exam today. My score is 880. Thanks everybady

Please some one advise that for this exam 70-341 - there will be scenario based question - means 1 Scenario and 10 questions from it.

Passed yesterday with 820 used the case studies in this dump and other questions from (DIANE.188q)most right answers

passed with 9XX 10 June 2014
I used Luceelle Dump and DIANNE dump....
all Questions were from these dumps...but answers need to be verified on Luceelle dump.
Good luck!!

is this dumps valid..???

@Costin
DIANE 188q is the correct dump I used

Tarek send me the pdf file at solimansystems@gmail.com and i will convert it to vce

@ Tarek,

I strongly advise you not to share your account details with anyone. PDF's can be shared without giving away your personal details.
Bear in mind that M1cr0$0ft is looking here too. I don't think you want to be banned from taking exams?
Regards.

The pass4sure and Examcollection Premium Dumps are both invalid as well.. *sigh*

@ MrPresident: What is the name of your VCE file. I cannot find it.
Thank you.

Mr. President I don't see yours yet. Did you upload under that same name? Maybe it just takes them a day or two to get it online.

passed with 820/1000

i have just passed the exam with a score of 820/1000.
All questions from this Dump, but some answers are not correct at all.
My friend also passed today with a score of 740/1000

Passed today with 7xx. All question form this dump. Need a lot of care and attention to prepare. Thanx LUCILLE and EC

Passed with 760.

Correction, pass through disks looks correct. Read you need fixed VHDs for Exchange data.

Passed yesterday with 7XX

Dump is definitely valid as of the beginning of June, all questions were from the dump, answers were mostly in the same order, even. Hardly any variation on wording.

As said before, wrong answers are plentiful but enough are right to pass the test.

I have uploaded a new vce today with correct answers which I used to score 9xx last week

anyone want to upload a vce that has 90% + correct answers? How is anyone supposed to pass when 30% of the answers in these files are wrong?

Anyone now the answer for the 4-part question about AL, GAL, OAB, ABPs?

What do you think about the public folder ? It says create the PF mbx, mail enable the PF, then create the PF. Can you mail enable a PF that doesn't exist? What do you think the correct answer is?

I rectify my answer, Exam G, question 78, the right answer is A:set-mailPublicFolder

Pass with 800 today in Malaysia. All questions from this dump. As mention by others answers are 75% accurate.

Question states: You create a public folder. You assign an email address to the public folder. You need to ensure that only a user named User1 can add content to the public folder by using email. Which cmdlet should you run?

This dump lists the answer as "Set-Mailbox" but I think it should be "Add-PublicFolderClientPermission". Anybody disagree?

A question I believe is answered wrong in this dump:

The question states User1 has the "managedBy" attribute on a distribution list named DL1, however when User1 tries to add User2 as a member, they get the following error: "Changes to the public group membership cannot be saved. You do not have sufficient permissions to perform this operation on this object".

It states to select two answers, both of which are the Powershell answers to configure both the "MyDistributionGroupMembership" and "MyDistributionGroups" settings. However, when viewing the verbiage in the admin console for these two settings in the "Default Role Assignment Policy" (found under "Permissions" -> "User Roles"), it states they do the following:

- "MyDistributionGroupMembership": enables individual users to view and modify their membership in distribution groups. This option is enabled by default in a new Exchange 2013 install.
- "MyDistributionGroups": enabled individual users to view and modify their membership in distribution groups in addition to modify, view, remove and add members to distribution groups they own. This option is disabled by default in a new Exchange 2013 install.

Therefore, I think the two answers to this question are to modify the "MyDistributionGroups" option in the shell and Admin Center.

Passed in 30 May scored 820 there is a wrong answer here but the new Q is imp.

Exam G
Question 135: I think right answer for the first one is "randomly distributed to a client access server".
This is because client requests are served by the same CAS only if the affinity is set to single. But as you can see the afifnity is not set to anything. The "single" parameter there is the one of the filtering mode which enables administrators to manually assign priorities to the NLB nodes.
Conclusion: no affinity is set, no priority is set, the client request should be randomly distributed.

Exam G
Question 74: Right answer is B: set-ContentFilterConfig http://technet.microsoft.com/en-us/library/bb123746(v=exchg.150).aspx

Question 77: I think right answer is A: internal OWA connections. Dump says Android phones using ActiveSync, but I think ActiveSync requires to enable permission inheritance first.

Question 78: I think right answer is D: add-PublicFolderClientPermission http://technet.microsoft.com/en-us/library/bb124743(v=exchg.150).aspx

Exam G
Question 71: Right Answer is D: set-transportService http://technet.microsoft.com/en-us/library/jj215682(v=exchg.150).aspx . Look at the DelayNotificationTimeout parameter

Exam G
Question 60: I think right answers are A: Remove-MailboxPermission and D:Add-MailboxPermission, http://technet.microsoft.com/en-us/library/hh529943(v=exchg.141).aspx

Question 62: I think right answer is C: set IISauthenticationmethods to basic and NTLM. http://blogs.technet.com/b/rmilne/archive/2014/03/19/exchange-2007-2013-outlook-anywhere-coexistence.aspx

Passed today with 820 .....

There was a Q about specifying the spam quarantine mailbox. Answer should be set-contentfilterconfig

To disable antimalware scanning but not engine updates answer should be set-malwarefilteringserver I believe.

The Q about accessing the invoices public folder. Answer is out of order. Should be create PF MBX, Create PF, then mail enable the PF.

Prevent transport agents from overloading the processor answer should be set-resourcepolicy

storage solution for the exchange databases Q: top of 2 answers should be dynamically expanding VHDs not pass through disks

Mixed Question: Q 76
answer should be A.set-mailpublicfolder
not set-mailbox
check
http://technet.microsoft.com/en-us/library/bb123707%28v=exchg.150%29.aspx

there is a parameter "acceptmessageonlyfrom"

mixed question Q69

it should be
set-transport service to configure delayed notification message DSN
not set-frontendtransportservice
http://technet.microsoft.com/en-us/library/aa998043%28v=exchg.150%29.aspx

Passed today with 8XX
All the questions are the same than this exam.

THANKS A LOT

Exam is valid. Enough to passed the exam study Dump + MOC + Facebook Group Exam-70-341.

Topic 7 Mixed Question, Q 66
i see remove-worloadpolicy is more reasonable
http://technet.microsoft.com/en-us/library/jj150503%28v=exchg.150%29.aspx

Valid Questions
Invalid Answer

@Lin

You had the question that asks you to limit the amount of activesync devices to just one for a user. There actually is a "Set-ThrottlingPolicyAssociation" cmdlet and I believe this to be the correct answer.

See the following link:

http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2010/Mobility/ HowtoincreasethemaximumnumberofActiveSyncDevicesforaUser.html

Pass 820

Failed today with 685 Points. Questions 98% identical with Dump. Answers only 75% valid. 1-2 new questions, 2-3 changed in Content.

I passed today!
Dumps is Valid but a lot of wrong question, Visit also the FB groups
Score 7XX

Exam is valid. Enough to passed the exam.

I will start the discussion. I question the answer on "Topic 1, Fabrikam, Inc, Q1". The gist of the question is that you have 3 sites, each with one mailbox server and one CAS server. What needs to be done to ensure that mail sent from a mailbox server is transported through the CAS server within the same site?

The answer listed is to "Remove the Mailbox servers from the list of source servers on each Send connector". Can anyone verify this is correct and, if so, why? I read the following article on transport and am not sure why this would work: http://blogs.technet.com/b/rischwen/archive/2013/03/13/exchange-2013-mail-flow-demystified-hopefully.aspx

Failed today 685!!, all the questions are from this dump!!

Trey Research question
Q7
why he selected this answer
authentication externally secured
permission group exchange server


my guess

the receive connector will receive internally from inside the organization so it should not be configured as external authentication
second part of the question is that permission i am not sure why he selected exchange server though they message which is sent by the helpdesk application should be received by anyone

I ve heard that the premium vce was updated! And it is valid for this exam!! Anyone did it with premium yet??

I passed today 720/1000. Actually this is my second shot. First time I failed with 585 but not this dump.
100 % valid Questions with 25% wrong Answers for this dump.
I will point you out in some before I forget. Hope this can help you all.

1. You have a user named User5 in the finance department. You need to prevent User5 from creating more than two Exchange ActiveSync device associations.
Which cmdlet should you use?
A. Set-ThrottlingPolicyAssociation
B. Set-ResourcePolicy
C. Set-ActiveSyncMailboxPolicy
D. Set-CASMailbox (THIS IS FROM THIS DUMP)
BUT
In exam only include B and C. there is no ThrottlingPolicyAssociation. Better Google it. I chose Set ResourcePolicy. Dunno whether correct or not.

2. You need to ensure that a user named ExehangeAdmin can deploy CU1 to the first server, The solution must minimize the number of permissions assigned to ExehangeAdmin.
To which groups should you add ExehangeAdmin?
I chose for this quesetion. C - Domain Admins and Organization Management
instead of B. Schema Admins, Domain Admins and Delegated Setup.
They want to minimize the permission and shouldn't give Schema Admin. I think no need.

3. How would you disable the anti malware filtering and ensure that engine updates from microsoft are downloaded and updated.
The answer should be set-mailwarefilteringserver instead of disable it.
http://technet.microsoft.com/en-us/library/jj150526(v=exchg.150).aspx


GOOD LUCK GUYS.

How about we help each other? Everyone who passes please post the answers you found wrong in the dump

Test_Takerr
Can you please post the Q. you think are wrong, and what are the right answers.
Thanks

@Ahmed El Hoseny can you please share the corrected answers if you have corrected any

Passed today with 7YY
Questions 100% valis
Answers not all valid

I did not pass the exam.

If anyone has an updated dump plz share.

Already found 3 wrong answers in the premium file for this test and not done yet. No wonder nobody is passing. The people creating these answers are not experts and get about 30% wrong when making these files.

anyone able to update with more correct answers?

During training with this vce, my average score was 900. Test failed today with 585.

Passed this morning with 740 (minimum is 700)
Questions: 99% VALID
Answers: 75% VALID

dump is valid. i've passed the exam

Passed Today,
Dumb is valid as Questions, but Some answers you have to read more about every one if you have a time,before taking, cause Some pool of question the total answer will make you fail and other pass, any way Study, read and Gooooo

Most of the questions are from this dump but some new questions and new case studies are not included here. Failed yesterday with 546. The exam was total 64 questions - 15(from 3 case studies) + 49 other questions. Lots of RBAC questions.

Passed yesterday with 7XX/1000!
Questions VALID
Answers partial VALID

It seems that the questions are fine, the problem was that many answers are wrong.
Maybe together we can go see the questions that we are wrong and go adding them to the comments.
Thank you.

It seems that the questions are fine, the problem was that many answers are wrong.
Maybe together we can go see the questions that we are wrong and go adding them to the comments.
Thank you.

Dear Everyone,
Is this dump's questions and answer really valid?please tell me...
Website admin don't block my comment and any other comment.please be honest.
Best Regards and Thanks,
May ...

Somebody check?

Topics are correct but there are many wrong answers today 612 failed.

Hi..
Please comment if the VCE is valid.
Thanks
Priya

Anyone know if this dump is valid? have an exam on Tuesday!

Topic 100% correct answers to 50% because I did not pass the exam

Pass Valid woth last dump\\

any Q
https://www.facebook.com/MomenHanyFP
01143739545

Good one..Thank you.

Is this dump updated with the new questions?