Pass Your Microsoft 70-640 Exam Easy!

Still valid in the US for the Active Directory half of the 648 exam. I passed with a score of 812. If there were any new questions, they were so similar to the questions in this dump that I didn't notice.

28March 2013 - Passed with this dump. Got just 700 mark. Got same questions in exam as this dump. Used the answers in dump on exam and still got 700/1000 think some of these answers are not legit.

Passed 3 days ago Alhamdulillah..Answers are not in same order as it is in the dump and also there were 5 or 6 different questions

i am 17 years old
today i passs from score 723

Dump not valid in South Africa....try newer Dumps..

how many dumps do i need to read to pass 70-640 exam?

Reminder:

════════════════════
░▒▓█▀ IMPORTANT ▀█▓▒░
════════════════════

I've uploaded a new version, Venomous_v2.

http://www.examcollection.com/microsoft/Microsoft.Pass4Sures.70-640.v2013-01-28.by.Venomous.469q.vce.file.html

Please use v2 as it has corrections for the following questions:
E02,11,12
F31
G37
K14,32

Many thanks to Luffy, 'confused', Camel73 and Wesley for their contributions!

I will no longer be following this thread.

Good luck!

Hi, plz what is the différence between 70-640 and 73-640.
i have planified 70-640 but in exam i found 73-640
and i failed it

Valid in UK just passed 815, thanks venemous

@ James. Yes you will need it to view and review the practice exams. You can find cracked copies of the app, but to be honest I would just buy it. Its a good price for something you will inevitably use if you plan on doing more certs. You can buy it here, http://www.avanset.com/

Dont memorize the dump, the questions arent even in the order you will find it in the exam. Rather use this with study material to see what subject matter they need you to know for the exam. Use the training mode on Visual Cert to see which sections you suck at. Then use a book and online resources to read up on that stuff. Before you know it you will know the relevant info for the exam, and gain some valuable knowledge at the same time.

Hope that helps ;) and good luck

Passed in South Africa with 800. This dump is still valid in SA. 5 new questions. All relating to the same stuff you find in the dumps. So no surprises. Work through the dumps and read the explanations provided by the various contributors of the dump and you will be fine for the test.

@Hendo

Thanks for the response. Was this this the dump that you studied to pass? Is everyone memorizing all the exams within the dump to be prepared for the real exam? Also, to review the entire dump, is it required to purchase the Visual CertExam Manager? Thx.

Passed today in Germany 900+
Very very valid this dump

Failed Today with 690 some questions new and wrong in dumps

@ sam from Egypt
i cant send any mail to you from hotmail or yahoo everytime it's failed
plz make sure from you mail buddy

This dump is still valid in malaysia. passed today but there was a few new questions.
@Venomous : Thank you very much for assistance to create this dump..

>>>golder<<<< mabrouk i,m sam from egypt i want to talk with you very important please i will tack this exam after a week my mail is forfre913@yahoo.com or please send my your modile phone please

I have passed yesterday with 884. Valid in India.

alhamdolilah iam now a MCITP
passed today with just 700
exam is very hard and complicated the hardest exam ever
all guys study hard study hard study hard the exam is tricky
i studied this dumb beside this Microsoft.Pass4Sures.70-640.v2012-08-19.by.FixedAnswers.468q.vce

i have pass today in 815 marks.
Thank u Venomous

Passed 6 new questions was there .. scored 828/1000

Failed On 23/2/2013 Many Questions Were Wrong and different i Got 689

Fail today 605..Portugal 15 new questions.

@James

I have taken 6 certs and passed all of them by only using the dumps found here. Don't get me wrong, if you plan to work in the feild then it helps if you know the material but we all know it help to have certs to get your foot in the door. With that being said, make sure you read the comments on the posts and chose a good dump and you should be fine. Keep in mind that Uncle Bill is always changing his tests, so when you commit to a dump, start studying and go take the test as soon as possible. Good Luck!

Thank you allah!. i have completed on 19/2/2013 with 768 marks.really its very very correct dump.
thank you for this dump.i love this dump.

Is this for real and does it reflect the real exam? So, I should not study the MS press book or the Cram book to pass? Do I need to purchase the Visual CertExam Manager to get all the question? Thanks, all.

Too add something to my comment below: View Exam L Q12, this clarifies a lot.

Exam K Q10 has to be answer D.

It is even stated in your reference:
Answer D may sound tempting but it speak of permission of server1 computer account.

Open the properties of the computer to which trusted users should be allowed to authenticate.

You have to Add the group to the computer account and check it with allow to authenticate.

i passed this exam with 792 marks. thanks

1) C
2) B

I think,,,

1. On one domain controller create a conditional Forwader.Configure the conditional forwarder to replicate to all DNS servers in the domain.

2. AD Sites and Services Console

Here are some new questions. Will be glad if somone knows the answers

1) A corporate netwok includes an AD DS forest that contains two domains. All servers run windows Serve2008R2. All DCs are configured as DNS servers. A standrad primary zone for dev.contoso.com is stored ona member server.You need to ensure that all domain controllers can resolve names from the dev.contoso.com zone. What should you do?

A) On one DC ,create a secondary zone.
B) On the member server create a secondary sever
C) On each domain controller , create a secondary zone.
D) On one domain controller create a conditional Forwader.Configure the conditional forwarder to replicate to all DNS servers in the domain.


2) A corporate network contains a Windows 2008R2 AD forest.You need to add a user principal name (UPN) suffix to the forest.which tool should you use?

a) AD module for Windows powershell
b) AD administrative centre console
c) AD Sites and Services Console
4) AD users and computer Console

Valid !
Passed with 746 and had only my bad memory to blame for not getting a higher score.

30% valid. %70 not valid. You must work another exams.

Venomous thanks a lot for your work. Passed yesterday with 770, 1 new question.

passed today - 792, 3 new questions.

How long you studied ? did you studied all the exam? or a specific, because until you study all exams the questions in the real exam will be changed. Need help

I failed today with 461, but planning to retake next week.

Reminder:

════════════════════
░▒▓█▀ IMPORTANT ▀█▓▒░
════════════════════

I've uploaded a new version, Venomous_v2.

http://www.examcollection.com/microsoft/Microsoft.Pass4Sures.70-640.v2013-01-28.by.Venomous.469q.vce.file.html

Please use v2 as it has corrections for the following questions:
E02,11,12
F31
G37
K14,32

Many thanks to Luffy, 'confused', Camel73 and Wesley for their contributions!

I will no longer be following this thread.

Good luck!

Hi Venomous will be taking my exam next week Tuesday and a hav already used videos as learning tool and for understanding, from your site which dump would you advise 1 to practise exam with between; Venomous.469q.vce posted on 2013-01-28 and Venomous 468q.vce posted 2012-11-08

Hi All, Please Please assist, i'm trying to view my exams, but my v exam suite does not wanna open the dumb, it says old version or something. Please assist i'm writting next week monday.

Alhumdulillah i have passed from this dump at 10-Feb-2013 in Pakistan.

this dump is 96% valid in Pakistan.

i have got 50 Q in which one Q was out from this dump which was simulation.

this dump is still valid in Pakistan, so best of luck guys !

valid in abudhabi passed today in 15 min (50Q-2 houre) score 861 (2 new question)

How come many people got score of 700-800 but all say the dump is valid?
Is it possible that many of the answers are worng?

Passed today with score of 700.
Thank you

passed with a 760 2 new questions thanks venom

passed 980

passed today dump valid. got 850
good luck!

passed today, 30 minutes ago.
dump valid. got 700 on my score.
the questions in exam are in diffrent order that in dump, and have 4-5 new questions.
good luck!

@Phil, how long where you studying the dump???????

why everybody pass i'm fail just 589 on fire ><

passed, dump valid. got 700 on my score. the questions are in diffrent order in the exam. good luck

Hi, passed today with 850. Great dump. Dont just memorise, try to learn as well. I can confirm this is the same as 073 as well.

Thanks Venomous the great dump

Wrote today in south africa, its valid passed with 825 100%.My advise please dont memories questions try hard to understand.
Good Luck

@andrew victor
Thanks for replying i will enquire at the newhorizon centre.
can u tell me more about your exam experience.
how many questions and do the questions wordings are same as in this vce
and how much is the time duration?

Thank you so much. The exam is still valid. I passed today with 850.

I also was told by Prometric that this test was down globally, then the test center gave me a call to let me know they had finally downloaded it. Hustled down there and scored 875.. Dump Valid!
thanks :)

Went to take the exam today only to be told that prometric had a global issue with setting the exam up in the test centers..

@ ITGUY
you can use prometric site to reserve the exam I do my exam in new horizons near burjuman metro station

100% valid. Thank u Venomous.......
Passed with 875 today....

this is valid 750 pass in pakistan 30/1/13

100% valid in Egypt Thank u Venomous I passed today with 850

This Dump is still vaild in Egypt passed yasterday with 775 thanx alot.

Passed yesterday in Spain with 975 using only this dump

dump still valid i got 900

@ITGUY

Still dead on today. The exam I had condensed down to 100 q sadly was not the same this time around (second chance ftw). Good thing I still went over all of these again. Passed with 850+ score

Great dump to use I'm sure v2 is even better.

@Venomous you da man.

══════════
IMPORTANT
══════════

I've uploaded a new version, Venomous_v2.

http://www.examcollection.com/microsoft/Microsoft.Pass4Sures.70-640.v2013-01-28.by.Venomous.469q.vce.file.html

Please use v2 as it has corrections for the following questions:
E02,11,12
F31
G37
K14,32

Many thanks to Luffy, 'confused', Camel73 and Wesley for their contributions!

Peter from Poland and Sherry, I suggest you post your question remarks in the new thread.

I will no longer be following this thread.

Good luck!

Hi Venomous,

In case the V2 still doesn't show up. Would you mind to temporarily upload it on any free file server?

Thank you very much for all your good work :)

Hey Venomous not sure why your v2 file still isn't appearing. I'm gonna be writing mine at the end of the week. Besides correction to E11 and E12, can you list out the other answer corrections you made in case the v2 still isn't available in a day or two? Thanks for all your hard work!

@ andrew victor
congrats andrew you passed.
can you tell me in dubai which prometric cenetre you gave the exam
or what is the procedure there for exam registration.
new in town.
Thanks

This kind of a disappointment. I had expected the v2 upload to be visible by now. Maybe they're only processing new uploads once a day. The "Latest VCE Uploads" list on the home page hasn't changed for six hours now.

I'll keep an eye on it.

thanks this dump is still valid in dubai I passed the exam today

Hi Venomous,

Really appreciated for ur dumps. I just passed with 850.

70% qtns are from ur dumps & rest are different.
Even from dump qtns answers are scrambled.

But still valid in India.

Thanks
Anand

@Venemous
Good job!!

Much appreciated.

@KK
I've uploaded v2 already, but it takes some time before it appears.

I'm somewhere half way through from this VCE and appreciate if you could upload V2 at the earliest possible time so I should waste time on this one. I'm planning g exam by end of first week of feb and your help / expalination is highly regarded and appreciated. Thanks

@Tina
Update to the latest version of Visual Certexam Suite (v3 or higher), then you can open this dump.

@Eddy
No guarantees, but my guess would be it's still valid in February.

@ILOVEMCITP

E11 and E12 will be corrected in Venomous_v2. The correct answers are:

E11
D. an organization claim

E12
D. Personal Information Exchange PKCS #12 (.pfx)

I tried to paste the explanation/references in here, but it's too much text. I will upload Venomous_v2 today, please refer to that VCE for information.

@Sherry

Too bad you cannot find the other question. If you had found an error I really wanted to have it corrected in v2. I'm going to upload v2 today. Should you find that question please bring it to our attention in the new VCE thread.

Ok, regarding K13. D is not correct and here's why:

Domain Name System Security Extensions (DNSSEC) is a suite of extensions that adds security to the DNS protocol by providing the ability for DNS servers to validate DNS responses. With DNSSEC, resource records are accompanied by digital signatures. These digital signatures are generated when DNSSEC is applied to a DNS zone using a process called zone signing. When a resolver issues a DNS query for resource record in a signed zone, a digital signature is returned with the response so that validation can be performed. If validation is successful, this proves that the data has not been modified or tampered with in any way.

So, DNSSEC is used to validate DNS responses, *NOT* to encrypt zone transfers.

This line says it all: "Active Directory replication traffic is encrypted; therefore zone replication traffic is encrypted automatically."
To achieve this we create a primary zone in the ForestDNSZone directory partition. This way it gets replicated to all domain controllers with a DNS role in the forest, including DC2, in encrypted form.

Passed today . 900/1000 . only 4 new questions .

@ Venomous - Thank you so much. good work. hats off :)

About , EQ 11 and EQ12 the answer are different in other dumps lease help me what is the correct answers! thanks alot

Valid in New Zealand/Australia, passed today with 950.

Venomous,

Sorry I'm still looking for that original question I had for you. Here is another.
---------------------------
Your network contains an Active Directory forest. The forest contains two domains named contoso.com and east.contoso.com. The contoso.com domain contains a domain controller named DC1. The east.contoso.com domain contains a domain controller named DC2. DC1 and DC2 have the DNS Server server role installed.

You need to create a DNS zone that is available on DC1 and DC2. The solution must ensure that zone transfers are encrypted.

What should you do?

A. Create a primary zone on DC1 and store the zone in a zone file. On DC1 and DC2, configure inbound rules and outbound rules by using Windows Firewall with Advanced Security. Create a secondary zone on DC2 and select DC1 as the master.
B. Create a primary zone on DC1 and store the zone in a DC=ForestDNSZones, DC=Contoso, DC=com naming context.
C. Create a primary zone on DC2 and store the zone in a DC=DC=East, DC=Contoso/DC=com naming context. Create a secondary zone on DC1 and select DC2 as the master.
D. Create a primary zone on DC1 and store the zone in a zone file. Configure DNSSEC for the zone. Create a secondary zone on DC2 and select DC1 as the master.

Original answer was D. Fixed answer is B. D seems right to me. B seems incomplete. Can you explain please?

@Nesreen
You should take the exam when you feel you are ready for it. If you're asking it because you think the dump may be no longer valid in two weeks, well, it probably will still be valid then. I can't give you guarantees of course, but it's just that these dumps have been valid for months.

Thank you for your quick reply. I have already checked the questions of this dump. Do you think that I should take it soon?

@Nesreen
Two days ago people reported it still to be valid.

Most dumps from the last couple of months have the same set of questions. Nothing much has changed really. People occasionally reported getting new exam questions, but those haven't surfaced in new dumps.

@gosha
The answers in the dump are correct for K48 and L04. Have you checked the exhibits? They are different.. ;-)

hey there again.. :)
exam K q48
exam L q4

Configure DC1 as a preferred bridgehead server for IP transport.
or
Configure DC4 as a preferred bridgehead server for IP transport.

exactly the same question different answer

witch one is the right one?

@praveena
I think because the 70-640 doesn't contain simulations. If I'm not mistaken it's the 73-640 exam that has simulations.

Hi Venomous,

Why no one is talking about exam simulations (LABs) ???

50 questions

@Confusions
Regarding C31:
The question states:

"You selected the Normal option for the Event delivery optimization setting by using the HTTP protocol."

This means we do not have to run winrm quickconfig on the collector computer. Check the explanation and the Technet reference (http://technet.microsoft.com/en-us/library/cc748890.aspx). The 70-642 Self Paced Kit doesn't take this into consideration.

Also, if you look at the exercises on page 536, the author lists the same steps as answers A, C and F:

* Configuring a Computer to Collect Events
- At a command prompt, run the following command to configure the Windows Event Collector service:
wecutil qc

* Configuring a Computer to Forward Events
- At a command prompt, run the following command to configure the Windows Remote Management service:
winrm quickconfig

- Run the following command at the command prompt to grant Dcrsv1 access to the event log. If your collecting computer has a different name or domain name, replace Dcsrv1 with the correct name and nwtraders.msft with the correct domain name.
net localgroup "Event Log Readers" Dcsrv1$@nwtraders.msft /add

[In the question we add the computer account to the Administrators group, but it has the same effect: access to the event log.]

Given the choice between the Self Paced Kits and Technet, I'd choose Technet every time. :-)

@Anand Sunka
Regarding G06:
I'm sorry, I can't explain it any clearer than I have done in the dump and here.

Check the explanation and the references again. The answer for G06 is D, nothing else. It's all in the word "first".

If you think it's something else, please provide a clear explanation why, not by just providing a link or saying "surely it must be C". Thank you.

Hi Praveena,

As per the Venomous answer wud be d. Run ntdsutil.exe on DC1.
But I think ans. wud be C:Run dcpromo.exe /adv on DC3.because it's prevents replication traffic..

Hey guys....can u clear this if I am wrong..


Regards
Anand S

Hi Venomous,

First of all thank you for your dumps..thing is that I am refering urs & onemore from Microsoft.BrainDump.70-640.v2012-08-30.by.ssss.468q_1..I just checked some of the qtns are.answered.wrong..SSSS.dump.I hope urs is rite...I am preparing urs only for my exam on this coming monday..

Few qtns u are..confused...by giving 2 answers..anyways thanks 4r ur dump.


Regards
Anand S

gosha
Venomous explained well and I agree with answer 'A' in the file. Below are the PowerShell options that pertain to Fine Grained Password Policy and the link is a bit of information on the MS exam structure. The real info starts around 4:01

http://www.youtube.com/watch?v=GiIH_eB5gsw

Get-adFineGrainedPasswordPolicy: Get one or more AD fine-grained password policies.
New-adFineGrainedPasswordPolicy: Create a new AD fine-grained policy.
Remove-adFineGrainedPasswordPolicy: Remove an AD fine-grained password policy.
Set-adFineGrainedPasswordPolicy: Modify an AD fine-grained password policy.
Add-adFineGrainedPasswordPolicySubject: Apply a fine-grained password policy to one more users and groups.
Get-adFineGrainedPasswordPolicySubject: Get the users and groups to which a fine-grained policy is applied.
Remove-adFineGrainedPasswordPolicySubject: Remove one or more users from a fine-grained policy.

Hello, Venomous!

I think the original answer A,D,F of the C / Q31 is correct.
Please refer to:
Errata for Self-Paced Training Kit Exam 70-642: Configuring Windows Server® 2008 Network Infrastructure
http://oreilly.com/catalog/errata.csp?isbn=0790145310347
Page 526 third paragraph under "Configuring Event Forwarding "
Note from the Author or Editor:
Please change this on page 526:
On the forwarding computer, start the Windows Remote Management service.
On the collecting computer, start both the Windows Remote Management service and the Windows Event Collector service

So:
On the forwarding computer (Company2):
start the Windows Remote Management service (Winrm.exe)
On the collecting computer (Company1):
start both the Windows Remote Management service (Winrm.exe)
and the Windows Event Collector service (Wecutil.exe)

What do you think?

@MCUK
Not sure if I will release one for 70-642. It takes a lot of time to collect all the data and references. Maybe I will, but don't expect too much. :-)

@gosha
Yes, we use Add-ADFineGrainedPasswordPolicySubject to assign an Active Directory fine grained password policy. But before we can do that we need to *have* an Active Directory fine grained password policy. We cannot assign something that is not there.

So, the *first* thing (remember, "What should you do first?") that needs to be done is to *create* an Active Directory fine grained password policy. Only after creating it can we apply it using Add-ADFineGrainedPasswordPolicySubject.

Venomous dude when are you going to release a dump for 70-642.
You said earlier you were studying for this.
This dump is top class.
Cheers

hey guys

q23 exam f

Your network contains an Active Directory domain. The domain contains a group named Group1. The minimum password length for the domain is set to six characters.

You need to ensure that the passwords for all users in Group1 are at least 10 characters long. All other users must be able to use passwords that are six characters long.

What should you do first?

i think it's B

http://technet.microsoft.com/en-us/library/ee617226.aspx

Praveena,
FIRST, you need to make a backup instance (snapshot),
in Win2008 uou can do it with ntdsutil or DSDButil

@Praveena
You would only ask that question if you don't trust the answer that is given. What do you think the answer should be? If you can explain that a bit that would be most helpful to improve the dump! Thanks! :-)

Your network contains an active directory domain named contoso.com. Contoso.com contains a writable domain controller named DC1 and a read-only domain controller ( RODC ) named DC2. All domain controllers run windows server 2008 R2.

You need to install a new writable domain contoller named DC3 in a remote site. The solution must minimize the amount of replication traffic that occurs during the installation of active directory domain services ( AD DS ) on DC3.

What should you do first ?

A. Run dcpromo.exe /createdcaccount on DC3.
B. Run ntdsutil.exe on DC2.
C. Run dcpromo.exe /adv on DC3.
d. Run ntdsutil.exe on DC1.

Guys what is answer of this question ???

I have passed today 825 score! Still a valid Dump. thank Venomous.

目前確認題目依然有效。

I have passed today in Calgary. Still a Valid Dump.

Hello i passed today in france 850 score! thank you

Venomous,

Sorry. Been really busy. I will find the question and get back to you today hopefully!

@ Smackdown
waiting for your vce which you said you remember all the ques which were on your exam.
@Venomous
Thanks Venomous for your contribution.
Will give the exam soon. now i am preparing for this exam.
any idea till which date is these 468 ques vce set is valid.
for me it will take more 1-2 week to complete this vce and give exam.

@Robyn
Here's a playlist for the free 70-640 course:
http://www.youtube.com/playlist?list=PLBBA04BF566F0E0D6

@Nada .. thanks for the link to the video..

@gosha and Nada
Regarding question E07:

Because the domain has only Windows Server 2008 domain controllers, the current domain and forest functional levels are 2008 at most. Introducing a 2008 R2 domain controller requires adprep /forestprep and adprep /domainprep to be run. There's no other way, it has to be done.

On top of that, the current domain already has five RODCs. This means that adprep /rodcprep has already run and doesn't need to be run again in this case.

Reference:
http://technet.microsoft.com/en-us/library/dd464018.aspx

adprep /rodcprep
If you already ran this command for Windows Server 2008, you do not have to run it again for Windows Server 2008 R2.

Thanks for bringing it up, an explanation will be included in v2! (Still waiting for sherry to respond, but she doesn't, it seems.)

Hi gosha,
Would you mind providing the question number and or the other possible answers in your post? However, I do agree with your answer. Although the current forest level is at 2008 the plan is to install a 2008 R2 and the forest will need to be at the 2008 R2 functional level as a result.

Here is a link to the exact issue:

http://social.technet.microsoft.com/Forums/en-US/winserverDS/thread/e97dd60c-2ad0-48b8-9b91-7072602ca068/

i think the answer is not accurate

Your network contains a single Active Directory domain. The domain contains five read-only domain controllers (RODCs) and five writable domain controllers. All servers run Windows Server 2008.

You plan to install a new RODC that runs Windows Server 2008 R2. You need to ensure that you can add the new RODC to the domain.

You want to achieve this goal by using the minimum amount of administrative effort.

Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

it should be

At the command prompt, run adprep.exe /forestprep.
At the command prompt, run adprep.exe /rodcprep.

http://technet.microsoft.com/en-us/library/cc754629%28v=ws.10%29.aspx#bkmk_rodcprep

any thoughts?

@Venomous
Thanks very much for helping and discussing , I have satisfied with your replay , Thanks a lot

Does any one knows that how many simulations are coming to the exam and is there any dump site for simulations ?

Thanks,

There are some new questions but passed today 850 points.
Thank Venomous so much.

Robyn,

I have used these videos and they are very helpful. I usually view them on YouTube. Below is the link to all of the ITFreeTraining 70-640 videos on YouTube.

http://www.youtube.com/results?search_query=itfreetraining+70-640&oq=itfree&gs_l=youtube.1.1.0l9j0i10.1581.2700.0.4378.6.6.0.0.0.0.174.763.2j4.6.0..0.0..1ac.1.MGeUPz4mVf8

Has anyone listened to:

http://itfreetraining.com/70-640/introduction-to-active-directory/

@Haitham Elroussy
Creating two shortcut trusts would not help. Besides the fact that it doesn't allow users from Forest1 to connect to resources from Forest3 (because a shortcut trust is between two domains in one single forest), and vice versa, you'd be creating *two* trusts.

Creating a two-way forest trust allows users in both Forest1 and Forest3 to access each others resources, and we've only created *one* trust.

References:
========
MCTS 70-640 Cert Guide: Windows Server 2008 Active Directory, Configuring (Pearson IT Certification, 2010)
page 327

Shortcut Trust
Unlike the previously discussed trusts, a shortcut trust relationship exists within a single forest. It is an additional trust relationship between two child domains, which optimizes the authentication process when a large number of users require access to resources in another domain. It is especially useful if the normal authentication path must cross several domains.


MS Press - Self-Paced Training Kit (Exam 70-640) (2nd Edition, December 14 2012)
page 639:

You can specify whether the forest trust is one-way, incoming or outgoing, or two-way. As mentioned earlier, a forest trust is transitive, allowing all domains in a trusting forest to trust all domains in a trusted forest. However, forest trusts are not themselves transitive. For example, if the tailspintoys.com forest trusts the worldwideimporters .com forest, and the worldwideimporters.com forest trusts the northwindtraders.com forest, those two trust relationships do not allow the tailspintoys.com forest to trust the northwindtraders.com forest. If you want those two forests to trust each other, you must create a specific forest trust between them.

@Venomous Thanks!! Well hopefully.. I have a month to study

@venomous
Exam F Q35, there are already two-way trust bet. Forest 1,2 and bet. Forest 2,3
he asked between Forest 1.3 with number of trusts must be minimized
so I think the perfect answer is "Create a shortcut trust in Forest 1 & a shortcut trust in Forest 3 " and is better than Create a two-way trust Bet. F1, F3

@Robyn
Just the Manager (for exam testing) is €20, so about 26/27 dollar I think. Some say they found it on the web somewhere.

If you're taking the buying route, it's a good investment. It's a fraction of the cost of an exam and when you learn the dump well, you can't fail the exam. Usually. ;-)

@Venomous - How much does this cost? Is it worth purchasing it? My test is the end of next month and I am trying to prepare as well as I can. I haven't taken a test in a good 10 years :)

@Robyn
Ah, from the AvantSet website:

"Trial Limits: In the trial version you will be able to access only first 5 questions from exam."

Make sure you're using the full version, then you'll get all 468 questions! :-)

@ Venomous.. I meant the files. I open them and there are only 5 test questions

valid in Serbia. Passed yesterday 875 points. Thanks a lot!

@Robyn
What are you trying to say? I don't get it.

@Peter
Hmm.. anyone who wants to comment on that?

You need to configure a domain controller named DC2 a copy of application directory partition.

IMHO: DSMGMT

http://technet.microsoft.com/en-us/library/cc730970(v=ws.10).aspx

passed 850 %
dump 100 % valid

@zosha
Regarding D29:
We need to access resources in another forest, so they need to trust us. This means we need to create an *incoming* external trust.

Reference:
http://technet.microsoft.com/en-us/library/cc816877.aspx

A one-way, incoming, external trust allows users in your domain (the domain that you are logged on to at the time that you run the New Trust Wizard) to access resources in another Active Directory domain (outside your forest).

i think that the answer to question 29 is wrong
Your network contains an Active Directory forest. The forest contains a single domain. You want to access resources in a domain that is located in another forest. You need to configure a trust between the domain in your forest and the domain in the other forest.

What should you create?
a.an incoming external trust
b.an incoming realm trust
c.an outgoing external trust
d.an outgoing realm trust

i think it's C
http://technet.microsoft.com/en-us/library/cc755427%28v=ws.10%29.aspx

Hi Venomous!
sure its was fun disscusing the question with you for 740, have alredy started preparing for the 642, i will start working with the dumps(742) like about 4 days before i take the exam., we shall meet on the other side:)
best of lcuk with you 70 640 preparation:)

Venomous this is a great dump!
Bought Cert guide prep book
watching videos from itreetraining
and this dump really is helping get a grasp of things

Doing the dump shows my weakness and that is mostly with sites, linking, delegation, dns subnets
so unless I am sure that I understand those features that is when I will sit the exam

Again thank u, your help is tremendous!

@Terminator
Hmm. both books are pretty good. The Cert Guide is a more 'easy', more pleasant to read. The Self Paced Kit has well organized exercises. Hard to choose a favorite! Note that both don't cover the exam 100%, so Technet is an essential part of the study.

I cannot share the Cert Guide PDF as it is watermarked. The videos can be found on the CBT Nuggets and Trainsignal sites, or somewhere else if you look a bit harder (quite easily, actually).. Same goes for the Self Paced Training Kit. Not the answer you're looking for, sorry!
Good luck!

@Lebza South Africa
I don't recall giving my email address, so there's not much to check. ;)

Passed taday got 850 still valid in Mzansi, thanks to this dump and also to venomous.
@venomous check ur email

passed today, dump still valid

i think right answer in question when u install software on user computers which got enough space on local disk is WMI Filter, not GPP

@ Venomous, thanks again for your input. Is it possible to share the PDF files of those books and maybe the TrainSignal and CBT Nuggets videos ? Which of the two books do you prefer to study ?

Thanks !

Just took the test today and can confirm this is still 100% valid. Finished in 24min with 900 points.

First off thanks to everyone who contributed to making this exam. I took the exam today (USA) and can say it is valid 100%, I had one unseen question about deploying software to machine but only to ones that have available space on the hard drive (WMI filtering), that was easy. However I still managed to fail (6XX) after reading this dump over twice, I seem to confuse the answers around I guess. I have modified this current exam to the questions I had on my test (from over 400 to about 100 that were relevant) and will re-take within a week. I hope to do better and if my exam doesn't change too much I'll upload/share.

@sherry
I'm ready to upload v2, but if you have found an error I'd like to include the fix of course!

Can you be more specific about which question you're referring to? When you say question 37 I assume you're looking at A37, as that would be the 37th question in the Manager would show you. But your comments do not make sense then. Could it be you have the "Randomize questions" option checked? Check it in the Manager's main window under Exam Options.

You can also type/copy the question text of course.
Thanks!

@Terminator
Congratulations! Good job!

For 70-642 I've watched the TrainSignal videos. I also have the CBT Nuggets videos, but haven't seen them yet. Not sure if I will.
I also have two books I mainly use,

MS Press - 70-642 - Self Paced Training Kit - 2nd Ed - (2012-11-30)
MCTS 70-642 Cert Guide Windows Server 2008 Network Infrastructure

Both are PDF versions. I also got a few other PDF books that I search in, when these two don't explain it well/don't cover it.
I did a few searches on Amazon as well. It's easy to find a book, and often there's a preview, and you can search in that preview. It doesn't always work, but it helped a few times.

Last, but certainly not least: Google! When I'm stuck on a question I don't know, and that frequently happens as not everything is covered by the books/videos, I do a Google search. I often use the "site:" function. For example, if I want to know something more about ipsec, I search on:
ipsec 2008 r2 site:technet.microsoft.com

The "site:" part makes sure I only get hits that are found on Technet, and I also include the "2008 r2" part in an effort to weed out ipsec information from the distant past. ;) Google and Technet are your friends!

Occasionally I copied and pasted part of a dump question and used the following search:
"part of question blah blah blah" site:examcollection.com
This would often result in hits where that question was discussed. Could be helpful.

And let's not forget VMWare! (Or any other virtual server environment.) Set up a couple of servers, implement a domain and off you go! You can do exercises in the books, play out scenarios, test things, see how it really works. Wouldn't want to miss it. Very valuable!

Hope this helpes a bit!

Question 37 answer makes no sense as it is not a domain controller. Can someone please advise?

Thanks Mcuk, Will study this dump

Catherine.. A few weeks is enough time to cover this..

Hiya,

Anyone can tell me how long it takes roughly to study this dump for a exam? I've got just under a month left untill my exam.

Thanks.

Passed today with 925, dump is 100% valid ! Now going to study for the 642 Exam.
@ Venomous, what is you exaclty study stragety for the 642 exam, wich exactly materials do you use ? Im asking this because for the 640 i first studied the self paced training kit but this did't help me much answering the questions you get on the exam. I'm wondering which specific book you are studying and which specific video's you wacth etc ?

Thank you in advance !

@ Bertha SA, I'm also writing @boston soon Prometric stil closed @ plk, I called Frank today nd said must get bck 2him on wednesday. Since I booked last year novemba itz been long nw. My mail itz Lebza4sho@thepub.co.za for any info

passed yesterday with 900 , 100 % valid in Egypt

Passed the exam today. This dump is 100% valid.

Pass! All the questions in this dump! Good luck to Everyone!

To day pass Score 800 form Vietnam.

@Nada
It's great you're setting up a VMWare environment for labs and testing! The best way to make it your own is to work with it.

Usually my study plan for something new looks like this:
1. watch some training video's, like TrainSignal, CBT Nuggets. This will build a foundation. It's probably not enough to pass a test, but it's a quick start.
2. Go through a good book (I usually look on Amazon which are recommended; and because you've watched the video training earlier it sinks in easier), and do the exercises. That last part is important. Do the lab exercises.
3. Get a dump and see at what level you are. If you don't know an answer, look it up, or start VMWare and test it out.

Mostly these phases kind of overlap. Find out what works for you and go for it!
Good luck!

Hi Venomous,

Thank you for clarifying this. You sound very knowlegable, do you worked with W2K8 on a regular basis? My company still has a 2K3 enviornment including exchange so I had to setup a VM environment on my laptop for the hands on. Do you have any study tips to offer ore is it basically spend as much time doing hands on and Inet research?

Much appreciate any time and advice you or any of the other members have to offer.

@Aliyah
Yes, I'm currently working on v2. Will probably upload it later today or tomorrow.

@Venomous
Are you still planning a "70-640 Venomous v2 dump"?

Thanks for all your good work.

@Nada
If a DNS server has a root zone, then that the server is a top-level root server. Because a root server is at the top of the DNS hierarchy, it cannot be configured to forward and does not require root hints.

So, to enable forwarding we have to remove the root zone, hence answers B and D.

Reasoning the other way around, the fact that forwarding is unavailable indicates that the server has a root zone.

Hi All,

I would like to thank each and everyone of you who dedicated your time to compile and share the information here. I would like to sit the 70-640 in February and am currently trying to get through the MS training kit book in addition to the dumps for better understanding. Can someone confirm/explain the below answer?

Your company has an Active Directory domain named ad.contoso.com. The domain has two domain controllers named DC1 and DC2. Both domain controllers have the DNS server role installed.

You install a new DNS server named DNS1.contoso.com on the perimeter network. You configure DC1 to forward all unresolved name requests to DNS1.contoso.com.

You discover that the DNS forwarding option is unavailable on DC2.

You need to configure DNS forwarding on the DC2 server to point to the DNS1.contoso.com server.

A.Clear the DNS cache on DC2.
B.Configure conditional forwarding on DC2.
C.Configure the Listen On address on DC2.
D.Delete the Root zone on DC2.

Why B & D and not A & B?
What in the question would indicate that DC2 had a root zone?

Thanks in advance!

@James,
I have no idea if this dump is valid in The Philippines. But seeing it's valid all over the world, I'm sure Microsoft didn't make an exception for your country. ;) So, learn it and go for it! :)

Hi, Luffy!
That's a very solid study plan! I'm a bit too easily distracted to study for 10 hours every day. I wish I could do that! :) Nevertheless, it's inspirational to read your plan. Very good.

Also, thank you very much for helping out here, to get a better dump! It's very much appreciated.

All the best, and maybe we'll meet 'on the other side' (being 70-642). ;)

100% valid. Thank u Venomous.......
Passed with 900 today....

Hi Venomous,
First of all, Thank you very very much for your dump..I am a student and new this
industry the first time I failed , I study your dump and also read my book about 3 weeks then I passed today with 725 {still passed right}. All question from your dump I got Q that answer A-J about 9 Q..I said agian this dump 1000% valid in USA.
God blessing

Great dump, passed with 950 today.

Thank you Venomous! passed the 70-648 exam today with 820 point for the 70-640 part! dumnp is valid

Passed today with 875, thanks!

Is valid in Brazil.

Thank You.

just passed today. Scored 900 :)

Hi All,

Passed this Exam Today (18-Jan-2013) in Chennai, India. Some questions are out of dumps but still valid in India

Also passed with 950 today, 100% valid, without new question here in Serbia.
Venomous thanks a lot for this dump. You are the genius. Great job for all of us.

Passed with 950 today, 100% valid, no new question here in NL.

South african guys who passed pls tell me wher did u take ur exam coz i booked to write @ Boston polokwane and the exam center is stil closed and reopens on the 4th Feb.pls let me knw where u passd ur 640 before Venomous's dump expires.pls help guys.

Kudo's 2 all the guys like nowanon and a special thanks 2 you Venomous. for making this dump perfect.

10000% valid

Hi Venomous!
i put about 30+ days preparing for 70640 worked a lot with DNS part while preparing for 70640. which is the major part in 70642 exam. so i can just scan threw DNS while preparing for 70642, so 24 days should be quite enoght if u put like 10 hours a days sitting and just studying and doing labs and reading technets.
my study plan 24 * 10 hours a day
i first divide the topics into small areas, just like the one that you see on Microsoft guide for certification, and i allocate certain days on preparing for the topic, sorting according to my strengths and weakness, i put more time on my weakness.
i watch nuggets, then i do labs according to nuggets, then i read self placed and do lab according to the book, if i am want to know stuff in detail i read tech net or Google it. I use dumps just to find my weakness and work on it or do more research on technet.
The errors in the dumps we have already discussed on this blog.

E11
I think you are right we need to create claims in order to mapp the claims to the security groups in the account store for authentication
answer is D as u said:)

Just passed the exam with 925 / 1000. all 50 questions were from the dump.thank you Venomous for such a wonderful collection. Now one to gooooooooooooooo..

Dump is valid.!! I got passed today with 825. :) !! And got some same ques with different set of answers.!! Study hard and do the practicals.!! Refer the all references that have given for the each and every ques.!!! Wish you all the best.!! good work Venomous.!! Dump is valid 100%. :)

Hi All,

Is this Dump is valid in Mumbai India, I am planning to give in next week.

Any help really appreciated


Regards
Anand S

Hey, Luffy!
Awesome score! Congratulations! You should be the one creating dumps! ;)

If I could steal a moment of your time:

1. what's your study plan for 70-642? Are you using videos? Are you using labs for exercises in books, or are you using them for the dumps? Anything else? 24 days seems pretty short! :)

2. I'm planning to do a 70-640 Venomous v2 dump and I'd like your opinion on these questions:

A11
You said the correct answer is "Add and configure a new resource partner". Could you explain that in a few words?

E11
I'm still kind of torn between answers B ("a resource partner") and D ("an organization claim"). Advice would be welcome!

Are there any other errors you found in the dump (apart from the others we talked about)?

I'll be using the following dumps for 70-642:
Microsoft.Pass4Sure.70-642.v2012-12-16.by.brn888.348q.vce
Microsoft.BrainDump.70-642.v2012-09-20.by.cramjunkie.379q.vce

Not sure if I'll be creating another one, since it takes up quite a lot of time. Would love to do it, though.

Thank you!

Hi venomous!
Valid dump about 7 new questions got 1000. Preparing for 70 642, its gonna be long study and lab hours for about 24 days, would be great if you can post 70642 dumps , will be glad to assist you finding the right answers, its much fun to have a disscussion about the conept and right answers

Passed in US, 9xx. Exam did not match all of the q's. Probably about 25 from this file, 20 that were very similar, and 5 that were not covered at all. Definitely a good resource but you want to know the material as well.

I just passed the exam 7** one drag and drop; one simulation; and a lot of a-j long questions. This exam is 99% valid.

@Nomatter, did you toke the exam today?

100% valid @ South Africa.

99% valid, I did my test today and got 800/1000 3 or 4 new question.
thanks

The Dump is still valid 99 % .

passed with 975.

One New question.

Thank a lot.

I passed before 5 hours with score 950/1000 , this dumps valid 90% only 5 new Questions ,thanks for The Lord Of The Ring Mr (Venomous), thanks for every one help me ,, 7 Questions in Active Directory Certifiace Services , 6 Questions in group policy , 6 Questions in Forst and domain wide operation ,9 Questions in DNS ,4 Questions in RODC , 4 Questions in Site and Services, 2 Questions in Domain trust , 2 Questions in AD RMS , 2 Questions in ADFS, 1 Question in ADLDS , and THREE QUESTION SIMULATION AND DROP AND DRAQ

passed with 850. still valid in us. thank you Venomous!

This Build is Awsome 850 in Ontario Canada 100% valid.

The Dump is still valid 100 %

passed with 1000 in Qatar

Passed with 800 in South Florida today. Only two questions not/not from this collection.

I can't remember one of them but the other I had seen in another collection. It concerned the installation of applications on workstations via GPO but to only install it if the workstation had enough available disk space.

Two down..three to go.

Passed today with 900/1000 score.
Dump is 100% valid in India.
Thanks to Venomous..
Good luck guys....

thank you Venomous

@lio
K13
Why do you think D would be a good answer? "Domain Name System Security Extensions (DNSSEC) is a suite of extensions that adds security to the DNS protocol by providing the ability for DNS servers to validate DNS responses. With DNSSEC, resource records are accompanied by digital signatures. These digital signatures are generated when DNSSEC is applied to a DNS zone using a process called zone signing. When a resolver issues a DNS query for resource record in a signed zone, a digital signature is returned with the response so that validation can be performed. If validation is successful, this proves that the data has not been modified or tampered with in any way."

So, DNSSEC is used to validate DNS responses, NOT to encrypt zone transfers.

This line says it all: "Active Directory replication traffic is encrypted; therefore zone replication traffic is encrypted automatically."
To achieve this we create a primary zone in the ForestDNSZone directory partition. This way it gets replicated to all DNS servers in the forest, including DC2, in encrypted form.

Thanks Venomous. It is 100% Valid. Only new question. It is about Applying GPO Based on Free Disk space on the clients.

Question K13
Your network contains an Active Directory forest. The forest contains two domains named
contoso.com and east.contoso.com. The contoso.com domain contains a domain controller
named DC1. The east.contoso.com domain contains a domain controller named DC2. DC1 and
DC2 have the DNS Server server role installed.
You need to create a DNS zone that is available on DC1 and DC2. The solution must ensure that
zone transfers are encrypted.
A. Create a primary zone on DC1 and store the zone in a zone file. On DC1 and DC2, configure
inbound rules and outbound rules by using Windows Firewall with Advanced Security. Create a
secondary zone on DC2 and select DC1 as the master.
B. Create a primary zone on DC1 and store the zone in a DC=ForestDNSZones, DC=Contoso,
DC=com naming context.
C. Create a primary zone on DC2 and store the zone in a DC= DC=East, DC=Contoso/DC=com
naming context. Create a secondary zone on DC1 and select DC2 as the master.
D. Create a primary zone on DC1 and store the zone in a zone file. Configure DNSSEC for the
zone. Create a secondary zone on DC2 and select DC1 as the master,

what is the right answer B or D???

@Luffy
E11, you're totally right, on Server1 we don't need to create an account partner. That would need to be created on the trusting party's side. My screw up! :)

I've been pondering on this one a bit longer and there are a couple of things that need to be setup on Server1:

- an organization claim
- an account store
- the resource partner

The question states that the account store has already been defined, as in it has been created. As far as I've tested in VMWare the organization claim doesn't have to be created *before* we create the account store. Both account store and organization claim have to exist before we do the claim mapping on Server1.
Furthermore we have to create the resource partner on Server1.

So I'd say that leaves us with two possible answers,

B - a resource partner
D - an organization claim

I'm leaning toward the organization claim, because that's the part that's purely used for user authentication, as asked in the question. The adding of the resource partner on Server1 has more to do with the creation of the federation trust relationship (which is also important for authentication of course.).

Any thoughts are welcome. :)

korrey
Resource partner

what's the answer ressource partner or account store?? question A11

E11
Its answer B(resource partner) contoso is already the account store so u dont need to create any account partner, since we are accessing the resourceses in the resource partner we need to create a rosource partner account

Hi Venomous
What i think(not very sure about immigration from fs1.0 to fs 2.0) ,as long as its ADFS farm either ADFS 1.0 or 2.0 we need to use Personal Information Exchange PKCS #12 (.pfx) if theya all belong to the same farm.I guess when we migrate from ADFS 1.0 to 2.0 for consistency sake i dont see any problem exporting Personal Information Exchange PKCS #12 (.pfx) from FS 1.0 to FS2.0.
Note
just as u mentioned. token singing cert which contains private key is shared within the FS farm.
Token singing cert(acount FS) containing public key is exported to resource FS ,

Hi everyone . This dump is soooooooooooo vaild i passed today with 950/1000. About 2 or 3 questions from exam " Microsoft.Pass4Sures.70-640.v2012-08-19.by.FixedAnswers.468q " wasn't in this exam .. Thank you Venomous we waiting exam 70-642 from you