Pass Your Microsoft 70-341 Exam Easy!

Failed today with 557 score.almost 64 questions and 25 to 30 questions are new and not available in ant dumps .Also from examcollection premium vce dumps only 28 to 30 are common and rest of them are new.So Please without study and correction of the wrong questions from the dumps ,Do not plan to sit for 70-341 exam

Fail Today 485

Hello...
I found latest 341 vce in examcollection :Microsoft.Braindumps.70-341.v2014-03-29.by.KELLY.119q.vce file.I think this is the lead2pass 119q Right? please answer my questions

@@ renegade 550 @@@...We will be waiting for your dumps. Thanks a million for your help...

Reuploading. Not sure why it hasn't shown up yet

Took the exam today, I didn't pass (637!!), I memorized all the answers, so something must be wrong. Only 5-6 new question ad even if I got all of them wrong I shouldn't fail. Any suggestions?

renegade_550 Thank you for the upload

@renegade_550
Could you please upload your file on some free file sharing website, because some of us have exam today or tomorrow and it can take couple of days to show up on this site.
We would appreciate your help.

renegade_550 Thank you!!!

Anyone post the latest dump with the comments

You are implementing a solution to meet the security requirements for Outlook authentication. You purchase a new certificate that has a subject name of mail.proseware.com and SANs of autodiscover.proseware.com and oa.proseware.com.

The answer provided by Booga is incorrect. The principal name must be the same as the externalhostname only if there is no SANS defined in the certificate. In this scenario the public facing DNS is oa.proseware.com and in the certificate their is a san specifically for that name.

The correct answer is

Set-OutlookProvider EXPR -CertPrincipalName msstd:mail.proseware.com

Set-OutlookAnywhere -ExternalHostName oa.proseware.com -ExternalClientAuthenticationMethod Basic -ExternalClientsRequireSsI $true -InternalHostName mail.proseware.com -InternalClientAuthenticationMethod NTLM -InternalClientsRequireSsI Strue

Does anyone tryed the premium vce yet?

@MCSE2014, I faied at first attempt but I've 2nd attempt free. So could you share the lead2dump VCE? I don't see it posted here. Please share or advise where we can get that from. Thanks for letting us know.

@For all people, These dumps are still valid but study other dumps also and read the comments in answers carefully.

@Dave, if you find the correct version and end up passing, please do let us know via this thread so I can go for 2nd attempt. Thanks

I wrote the exam and failed with 68x so pretty much with just one wrong answer.. However I answered everything according to this dump or loucef's dump.. that means there are a lot of wrong answers.. only 2-3 new questions.. wondering if someone will be correcting the answers and reuploading before I do 2nd try as I don't know how exactly to do it.

@Khurram - you can find MAXBOX here. http://www.4shared.com/zip/GAug6PtF/70-341.html?

This dump is not valid. The questions are the same but the answers are wrong. I failed with 684. I used this dump as well as Amy-ExamK, LouCifer Satchmo V4, correctedSussex and Barabelloe. I reviewed the answers provided as well as compared. Many answers are wrong. Everyone keeps asking is this dump valid but no one is willing to answer. If you have passed it would be nice to give back to the rest of all the people who are trying to pass and provide the correct answers. Thanks all.

failed and used LouCiefer dump and this dump... all the questions were from here except 2-3 new questions but i guess a lot of answers are wrong.. hoping someone can provide a correct version soon.

From where to get the MAXBOX dumps can any one help.

Hi all, is anyone able to definitively answer the layer 7 layer 4 question? It is question 3 from A Datum. Thanks all

@Muhammad Usman , which dump you had studies , and r these dumps are enough to pass.
Thanks

Alhamdolillah I have passed this exam on 27th February 2014 and got 8xx marks. Read the answers and comments carefully.

Alhamdolillah I passed yesterday and got 871 marks. Please read comments in answers carefully.

Still valid. Passed with 7xx. Used Amy dump and sussex exam K and ocean and also check the answered from @eheh in Amy comments page

No other answered changed.

1 new question not in this dump:

Rin new-mailboxdatabase -name rdb -server 'ex4'-logfolderpath f:\rdb -edbfilepath f:\rdb\db1.edb -recovery, and them mount the RDB

Delete the checkpoint file in F:\RDB, and then run eseutil.exe /r /e00 /a

Run New-MailboxRestoreRequest to restore the email message of User1

but not sure about the answer this is my second shot

Passed yesterday 7xx, but 7-8 q. are different. Review all questions/answer very deep!!

Does anyone know the answer to this. I found this in the images MAXBOX posted. Thanks in advance all!

http://tinypic.com/r/257hcsx/8

A few exams are giving different answers for this questions. The one Louciefer/SatchmoV4 posted said the answer was E. but the one posted by Sussex says the answer is A.

Which one is it?

Topic 3 - Litware, Q3

You are testing the planned implementation of Exchange Server 2013
After you begin moving serveral mailboxes to Exchange Server 2013, you discover that users on teh internal network that have been moved are prompted repeatedly for their credentials when they run Microsoft Outlook.

You run the Get-Outlookanywhere cmdlet on CH-EX4, and receive the following output.


You need to prevent the internal users from being prompted for their credentials when they connect to their mailboxes by using Outlook.

Which property shoudl you modify by using the Set-OutlookAnywhere cmdlet.

A. IISAuthenticationMethods
B. InternalHostname
C. ExternalHostname
D. ExternalClientAuthenticationMethod
E. InternalClientAuthenticationMehtod

Hi All, What exams is everyone using lately? I see louciefer's exam is being used as well as Amy-Exam K. Is Mo's exam still good? Is anyone working on making one master updated exam? Thanks all, and good luck!

is this exam still valid?

Passed this exam today with 8xx. That means that approx 6-7 questions was answered wrong. I only got a couple of questions I havent seen before at all. But look at the dump from amy as well->Exam K.

Is this dump still valid in India?

failed today I studied from LouCiefer dump and corrected sussex exam K ,all the question from those dump , but I think some answers were wrong

Is this dump still valid at south africa

@LostInBKK did you use Loucifier updated dump? did u pass? :)

Pass 742 - some question was change.

Hi, This Dump still valid but needs to review all questions/answer very deep. Today I passed the exam with 743 !!!

Passed today 743
read all the comments on this dump. put in some real time. and use sussex updated dump.
changed qn.
Misc1 q21
only available answers:
a:Ms outlook
b: ms exchange rpc extractor
c: ms exchange server deployment assistant
d: ms exchange server user monitor

Back on the studying today as I have my exam on Monday.

@LouCiefer Thanks Man Downloading now :-)

@LostInBKK: Have a look at this:
https://secure.filegenie.com/
User: louciefer / Pass: louciefer / Check SSL
There is satchmo's V4, updated from me with checking KnowledgeBase, Technet and this forum answers.

Hope it is helpful for you and all the others here. Passed with my corrected version with 800 points. At my exam there are 6 unknown / new questions.

Took the test today here in Bangkok today and failed with a 6XX score

The questions were exactly the same as this dump. Just a question of learning the dump and storing the information. I will take the test again Monday or Tuesday.

I was using @SO Dump http://goo.gl/neu6oh

@SO
Thank you for the link. FYI - The wrong answers are highlighted (according to your explanations) on.

Proseware Q6, Q3
Misc2 Q1

I came across one more like this but I couldn't find which one it was..

@LouCiefer Thanks for answering I will get studying :-) I have exam on Wednesday

@LostInBKK: Thats correct. Not all answers are wrong. Check the answers with Knowledgebase and Technet. This is the only source of correct answers.

@SO

Congrats Man on passing

Are you saying you updated your test with the correct answers

Passed today with 742
Got and tried to correct sussex dump, thanks to everybody that worked on that!
Uploaded my "sussex-version" here: http://goo.gl/neu6oh

So what everyone is saying is the questions are correct in this dump but not all the answers are correct?

Have I understood this correctly?

Cheers
Lost

failed two days ago with 684, try again today, used sussex dump and tried to correct the answers

@ABC: regarding the URL you specified that is for EX2007. The behavior changed a few times even during Ex2010 CU's, esp with how it handles URL's.

I've done it this way a few times now, and tested it in my lab.

Load it up in your lab and try for yourself.

Failed today with 684, studied only Sussex-dump which is quiet risky. Questions ok, but lot of the answers seem to be wrong. Tried to correct them, but too much discussions about too much questions.

Hello Guys,
Could someone tell me where to get the sussex dump?
Thanks a lot!

Misc , Q4 - I disagree the correct answer is C.

In my opinion it should be B - create device access rule.

The question is asking what you should do first - first you have to create access rule for android devices to be quarantined and after that to allow the device for user1 only.

By default all devices are allowed if you dont create an access rule.

Do you agree ?

@B from Canada

Regarding Q2 in Proseware. I disagree with you. A and B should be the correct answers as stated in the dump.

See the following article from the MS Exchange blog and scroll down to scenario 1 and 2:
http://blogs.technet.com/b/exchange/archive/2008/09/29/3406352.aspx#75134

Passed with SatchmoV4 from FileGenie.com. First Session failed, after that checked and correct all answers with M$ TechNet and KnowledgeBase and the Threadanswers from Booga. Thanks a lot to Booga!!

From my Exam:
Misc4 - Q8: The question ask for temporary disable the anti malware filtering and ensure that engine updates from microsoft are downloded and updated. => So I think the answer is: Set-MalwareFilteringServer.
>> To temporarily bypass malware filtering, run the following command:
>> Set-MalwareFilteringServer -BypassFiltering $true

Top1 - Q9: Question was not in Fabrikam but: Ex1-Ex3 => Mailbox-Server / Ex4-Ex5 => Clientaccess-Server. So the answer to meet the technical requirement for installing all of the anti-spam agents and for enabling antimalware filtering is Ex1-Ex3.

Hope to help someone with this infos.

Greetz,
Lou Ciefer

Passed this week with a 9XX. As others have alluded, dumps alone are not enough.

One new question similar in nature to the other question on DB restore, with different steps required.

@JackP: I disagree.

Get-App is used for finding information on currently installed applications and is not used for installing applications.

My lab is not cooperating to test it, but based on: http://technet.microsoft.com/en-us/library/jj218722%28v=exchg.150%29.aspx

I would assume the answer would be the...

$data (get list of all apps)
new-app (install all apps from $data variable)
set-app (used to set the app as enabled)

Passed today 742
sussex dump not valid
thank you booga,b,gta,maxbox for corrections.

The answer in dump is valid. Look this link:
http://technet.microsoft.com/en-us/library/dd638101(v=exchg.150).aspx

Can anyone share the sussex dump (or mail it to me directly to v_vanhoek@msn.com)?

Thanks in advance.

Victor

Pass the exam today with 828

Hey Shawn from USA ,how about you actually study, this dump is 70 to 80% Valid, do some research like the rest of us who passed otherwise what is the point in doing this exam??

Hi, Where can find the dump for Ocean, Sussex? can you give us the link?

7XX, Passed, if you want to pass, you MUST read comments.
Thx, GTA, MAXBOX, Booga and all.

The Question Miscellanous Q3 - Outlook web App is detailed in this place:
http://msdn.microsoft.com/en-us/library/office/fp142256.aspx.

The correct answer are:
1)Install the Outlook app
2)Run the Get-App cmdlet
3)Run the Set-App cmdlet

Misc 1: Q3.

The correct answer I believe should be B, not A.

Changing the default route, would not solve the fact that all traffic goes to one Client Access server. Configuring the NAT device to pass original source would if the LB is balancing based on client address (usually the default config).

@Booga

Regarding Litware Q5. I can see where you are getting the create OU for it in the URL you specified.

If you review this URL: http://technet.microsoft.com/en-us/library/ff629379%28v=exchg.150%29.aspx. If you notice, the key item is that OU's are not required, but can be used.

Detailed instructions for creating HABs are included in the topic Enable or Disable Hierarchical Address Books. The general steps are as follows:

Create a distribution group that will be used for the root organization (top-level tier). If desired, you can use an existing organizational unit in your Exchange forest for the distribution group.
Create distribution groups for the child tiers and designate them as members of the HAB. Modify the SeniorityIndex parameter of these groups so they're listed in the proper hierarchical order within the root organization.
Add organization members. Modify the SeniorityIndex parameter of the members so they're listed in the proper hierarchical order within the child tiers.
For accessibility purposes, you can use the PhoneticDisplayName parameter, which specifies a phonetic pronunciation of the DisplayName parameter.

can someone help me please....
I have failed for the 2nd time!!!
I have studied both Mo and Amy but I only got 68x... some new question as well.
please email me direct: saledavood@yahoo.vom

@Booga regarding Fabrikam Q1, I disagree with you on this one. It is actually a trick question.


Dagnet1 should be ReplicationEnabled
Dagnet2 should be MapiAccessEnabled.

DAG behaviour for replication is that it will use the Mapi Network automatically, without being configured for replication IF that is the only available network.

From TechNet. http://technet.microsoft.com/en-us/library/dd638104%28v=exchg.150%29.aspx#NR

Using two network adapters in each DAG member provides you with one MAPI network and one Replication network, and the following recovery behaviors:

In the event of a failure affecting the MAPI network, a server failover will occur (assuming there are healthy mailbox database copies that can be activated).
In the event of a failure affecting the Replication network, if the MAPI network is unaffected by the failure, log shipping and seeding operations will revert to use the MAPI network, even if the MAPI network has it's ReplicationEnabled property set to False....

@Booga.

How did you do on the exam. I am also going through the dumps and checking answers as I go.

Regarding Q2 in Proseware. I disagree, the correct answer should be A and B. Not A and D.

The first command, you are setting the cert, and the principal name does have to match the subject name.

The second command, you are setting the URL for Outlook Anywhere in the PUBLIC url. Therefor, the externalhostname has to be OA.proseware.com (as that is the only record added we are being told). The hostname does not have to match the Cert Principal Name. What is set in the hostnames are populated into autodiscover service. So, if you set the mail. URL then Outlook Anywhere would not work anymore, as there is no A record for mail. in public DNS.

I am curious where you are getting the statement that the ExternalHostName needs to match the CertPrincipalName.

Passed with 700! around 15 wrong answers.
Used Sussex dump.
Guys this exam will not give you the Exchange 2013 certificate (as exchange 2010). After the exam you are MS Certified Pro. You will have to pass 70-342 exam!

Passed today with 700. used sussex dump and corrextions of Booga and MAXBOX.. and some corrections by myself.

Passed yesterday

8XX

SUSSEX dump only, went over and over the questions,slightly dissapointed that I didnt get higher which leads me to beleive that there are some friggin tricky questions

most of the wrong answers are around Transport 70 to 80% correct , Client access and Mailbox are equal about 85 to 90% correct,
Design and manage is probably is the most accurate out of all 4.

I can see why people are failing ,I checked all my answers a hundred times so don't know how they could be wrong

my choices

external host name doesn't have to match cert principal name

remove hub site

layer 4 and layer 7

File witnesses have to be in diff sites

Contoso Q6

Ok the point of focus here is that WAN link, if that dies then new york loses visibility to Montreal and so the quorum will fail.

So I think the dump is correct, as you can have the active database for ny running in ny and DAG 2 the active database for atlanta users runing in atlanta with the file share witness for each runing in the same site. so if the link fails dag1 withe active copy for new york users runs fine in Ny and same for atlanta

CONTOSO Q6

my apologies BOOGA, It seems you might be right

http://technet.microsoft.com/en-us/library/dd298065%28v=exchg.150%29.aspx

"When a DAG has been deployed across two datacenters, a new configuration option in Exchange 2013 is to use a third location for hosting the witness server. If your organization has a third location with a network infrastructure that is isolated from network failures that affect the two datacenters in which your DAG is deployed, then you can deploy the DAG’s witness server in that third location, thereby configuring your DAG with the ability automatically failover databases to the other datacenter in response to a datacenter-level failure event."

Contoso Q6 -hotspot

@BOOGA

after doing some research

http://technet.microsoft.com/en-us/library/dd979799%28v=exchg.150%29.aspx


"To eliminate the WAN as a single point of failure when you need to provide site resilience for multiple datacenters that each have an active user population, "you should deploy multiple DAGs", "where each DAG has a majority of voters in a separate datacenter." When a WAN outage occurs, replication will be blocked until connectivity is restored. Users will have messaging service, because each DAG continues to service its local user population.


key points

you should deploy multiple DAGs

each DAG has a majority of voters in a separate datacenter


Also File share witness has to be in the same site as a DAG,It's a bad idea having it in a seperate site,As a matter of fact your choice would cause a split brain syndrome as it would lose visibility of the file share witness if Montreal goes down.



Dump seems to be correct

No your right BOOGA

they said that only EX2 is down,doesn't mean that other AD Traffic shouldn't flow,so modifying the exchange specific site link would make sense,but there is nothing mentioned in the question about what those costs are.

EXAM K Q11
Good point BOOGA

so email will relay through a HUB site only and only if it is on the least cost route.So if we remove hub site,EX2 is still along the least cost route,Also exchange specific cost is not an exch 2013 technology, it was available in 2010 as well.

so the question really is between exchange specific site cost and ad site link costs, if we modify site link costs firsts it's gonna bypass ex 2 unless the path has some exchange specific costs which the questions doesn't specify or mention, so my guess is

a)modify active directory site link costs.

Litware Q5

dump is correct
you can use existing ou,you dont have to create

then according to technet 2,3
step4:Litware already has distributions groups that mimic departments(it's in the desc)
step:5 obviously.

so the fact that they mentioned that the distribution groups mimic the departments leads me to believe that they would like step 5 in the answer.

Proseware Q2

Also




http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/planning-deploying-testing-exchange-2010-site-resilient-solution-sized-medium-organization-part5.html

see the bottom where he has to assign a cert for the failover site.

Hello,

Could you please upload the Ocean's dump?

wonderful work Booga , I will chime in tonight as well, good to see someone trying to solve as opposed to asking for a valid dump


Proseware


external hostname doesnt have to match CPN

http://social.technet.microsoft.com/Forums/exchange/en-US/ce3547ab-fb98-4b14-b5c7-e42142e017e5/exchange-2010-dag?forum=exchange2010

"ust remember that the Outlook Anywhere External Hostname does not need to match the Cert Principal Name *IF* you set it in the EXPR Outlook Provider. Once the Cert Principal Name is set in the EXPR Outlook Provider it's set globally for the org. Therefore any cert that is installed on CAS (or UAG/ISA/TMG) that will be an Outlook Anywhere endpoint MUST have that Principal Name. The other names can then be SAN's on the cert."

IF Set-outlookprovider expr command HAS'nt been run then the external hostname as the cert principal name to match.Also OA has a public dns record which makes sense for outlook anywhere.

http://clintboessen.blogspot.com/2009/06/configuring-outlook-anywhere-settings.html

external hostname will automatically appear in the top field in the window shown

once you run set-outlookanywere expr cert principalname the field below is ticked and your cert principal name will appear there

I just tried this test for the second time and I have failed...
they are lots of new question and new names!
Could someone help with the new set of question please.
Thank you all.

Passed today with 8XX. You have to know your stuff. Relying on the dumps alone will not allow passing of this test. Review the screenshots from MAXBOX as well...good luck all!

Passed with 700 scores!!!! Many wrong answer.

All question from sussex and ocean dump

EXAM K: Sussex Dump
-Q8 - Answers should be BCE. Should be C instead of A - have the 2013 server redirect the client connections to the 2007 mailboxes
-Q5 - validated. http://dizdarevic.ba/ddamirblog/?p=78
-Q4 - validated. key wording is "only cert installed expires." First you assign cert to services, then send to the other company. answer is C IMHO
-Q11 - why not modify the exchange site link costs? it's a new feature for 2013 and seems easier than removing the hub site. thoughts?
All others are good IMHO.

CASE Scenarios: - Sussex Dump
Fabrikam: I agree with all answers
Contoso:
-Q2 - Rebuild Index. Plus if the answer is A in the description, then why is D still the answer in the dump?
-Q6 - Should be in top right quadrant (fig2) IMHO to avoid "split brain" scenario.
Litware:
-Q5 - thoughts? http://technet.microsoft.com/en-us/library/ff607473(v=exchg.150).aspx
IMHO steps should be:
1.Create OU
2.Create root distro group
3.Set-organizationconfig
...but in the technet article it has the steps in the answer as 2,3,5...
A Datum:
-Q3 - Layer 4 and 7
Proseware:
-Q3 - There's been debate on this. Very tricky but IMHO it's in the wording of the question "...meet the technical requirements for the NEW CONTOSO USERS"
This indicates ignoring the existing ones for the linked group option, ergo the dump answer is correct:
-UPN suffix
-Trust from proseware to contoso
-linkedadmin parameter
-Q2 - incorrect - should be:
A - ...EXPR CertPrincipalName mail.proseware.com
D - ...-ExternalHostName mail.proseware.com
EXPR -certprincipalname must match the CN of the Cert, and if the external host name for OA doesn't match that, errors could occur.

Moving on unless someone objects.

Passed yesterday with 785 ... this dump is valid 100% .. but not all the answers are correct..

@Peter - It's apparent you can't simply memorize the questions/answers. The purpose of these tests are to show you how much you truly know about Microsoft products, not quiz on the ability of memorization. That said, you really should spend the time going through and research the information. It's important to know why the some answers are correct, and why others are incorrect.

With that said, I'm taking this test next Tuesday. I'm going through and will be posting up my own findings on the Sussex dump since that one seems to have the most following at this time. So far I've been focused on the case scenarios...so hopefully I can contribute a bit.

Contoso Q6 - hotspot
-The answer given doesn't make sense to have witnesses in 2 sites. If one site fails, the witnesses can't see the DAG members, so then you'd end up in a split-brain scenario. Best solution is to have the witness outside in a 3rd site. I personally think the answer is the 2nd area where there's just one large DAG and the witness is in Montreal. But I'm going off of the information in the case info that all the NY and ATL servers are part of the same DAG (NY-DAG).

Q15 MISC 2

commands to run on server 1

should the answers be
install...rsat adds
setup/prepareschema(dont have to run but...see below)
setup/preparead


setup/preparedomain should be actually run in the child domain not on server 1

Question are valid. 2 new questions.I use only sussex dump & had only 668. Answers are wrong, mistakes must be checked and correct.

Question are valid. 2 new questions.I use only sussex dump & had only 668. Answers are wrong, mistakes must be checked and correct.

Failed with 668, My results show that all sections were 80-90% correct apart from Plan, install conf Client Access which was about 75% full, such a shame! I used Sussex dump only and memorised all questions, reproducing answers verbatim. The people who have passed have either diligently done their homework and should be commended or have been lucky enough to get the questions which have correct answers. I will retake at some point, I am just so lazy / busy to go through and find the stupid M$ correct procedure for everything! I hope some kind soul will produce a better dump or they keep plugging away with corrected answers in the forum. Thanks for all your help guys.

Failed today 637, all questions from this dump except 3-4 new. I should have read all the comments before taking this exam.

update new question

http://www.4shared.com/zip/GAug6PtF/70-341.html?

You have an Exchange Server 2013 organization that contains a server named EX1.
You have a user named Used in the marketing department.
You need to prevent User1 from submitting more than 50 email messages per minute to the Exchange Server organization by using Microsoft Outlook.
Which three commands should you run?
To answer, move the three appropriate commands from the list of commands to the answer area and arrange them in the correct order.

new-workloadpolicy -workloadtype transport 50

$b = get-throttlingpolicy limits

new-throttlingpolicy limits -recipientratelimit 50

new-throttlingpolicy limits -messageratelimit 50

set-mailbox -identity userl -recipientlimits 50

set-mailbox -identity userl -throttlingpolicy $b

set-transportseryer -identity exl - maxoutboundconnections $b

@big mick

re:device access

take a look at this

http://exchangeserverpro.com/creating-activesync-device-access-rules-exchange-server-2010/

HI , I have given paper yesterday and got 675 numbers , thus not passed the exam . Though i tried to submitted same answers given in this dump . I belive that some answers provided in this dump are wrong. there were total 52 questions in the paper out of which 5 questions are not included in this dump. sorting of answers also changed in the exam . 47 questions are same to same avaliable in this dump. I have chance of retake , if some one has an idea of wrong answers of this dump , then please let me know , also i am looking for the corrected answers . Please help me . my email address is asd990@hotmail.com

From coment

http://exchangeserverpro.com/fix-all-failed-exchange-database-content-indexes/

I have one database that has Content Index State of “unknown”. I cannot run the CatalogOnly as it fails “Seeding of index catalog for database DB1 has failed. Please verify the Microsoft Search (Exchange) and the Host Controller service for Exchange services are running and try again.”

Yes both services are running and I even tried to restart Microsoft Exchange Search..

I think Answer is A

@No Fun at All

I think you are correct you can use the Set-Casmailbox command for allowing only one device ID

http://unifiedpeople.ru/exch2013onpremhelp.en/html/ff7d4dc5-755e-4005-a0a3-631eed3f9b3b.htm

ActiveSyncAllowedDeviceIDs

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ActiveSyncAllowedDeviceIDs parameter accepts a list of device IDs that are allowed to synchronize with the mailbox.

Let me know what you guys think.

My mistake Rebuild the content index is correct

http://social.technet.microsoft.com/Forums/exchange/en-US/2c6df574-a90c-47f5-aa73-c4b81b303405/how-to-repairrebuild-content-index-on-mounted-database?forum=exchange2010

anyone know what questions are wrong? or perhaps the known answers to the ones that are? or if they even know what the wording modifications are? Similarly for the 70-342.

If so I will make the corrections to them and repost, I'm being required to take this test for my job. I do not feel comfortable taking this test when all the study guides are marked 1 or less stars everywhere I see.

passed today with >750.

We are talking about a lot of question and the answers (correct or not) I had a lucky day and didnt get this question, maybe 2-3.
Load Balancer ( i checked layer 4 and layer 7).

Queations are 10000% valid NO new questions !!

I Some answers are wrong and needs to be checked.
Anyone should or have to check this questions and answers and not "i need valid dump , i need valid dump.....".

Work together whis will help for ALL !

Passed with 724 with Sussex dump
Questions are valid, some minors change, 2 news questions.
i have change some answers, thanks Sussex for the dump

Design and Manager - ok
Plan, install conf.... Manage Transport - ok
Plan, install conf Client Access - bad
Plan, install conf mailbox Role - ok

I have checked answer layer 4 and Layer 7.
For Misc 1 question 4 , why not "Set-CasMailbox" with ActiveSyncAllowedDeviceIDs. With device acces rule, you make a rule for a model, not only for one android.

Passed this friday with 742. Used the dump from Ocean.
there are no rooms for mistakes. know your stuff.

Changed responses according to comments here but failed with 637, studied with ocean, messi pdf and the newest dump posted.

Failed today using sussex dump, 635 points.
I guess some of the questions in the dump have incorrect answers... got only 1 other question that is not in the dump

SoftLibTemp do you have an updated dump with your changes? If so please make available.

@Mad and @big MICK

BIG Mick is correct
http://howexchangeworks.com/2013/08/fix-corrupted-content-index-catalog-of-a-mailbox-database-with-single-copy.html
Rebuilding the index is ok if you have only 1 copy, The active database is still a "copy" an active copy,

http://technet.microsoft.com/en-us/library/ee633475%28v=exchg.150%29.aspx

if you read the link you posted you will see this

"If the mailbox database copy is the only copy, Exchange Search must create a new content index catalog"

If I do an get-mailboxdatabasecopy, it brings up the the active copy as well, so this command should work on an active copy

q3 Adatum

All of the servers in the New York office that have the Client Access Server role installed must be accessed by using a
load balancing solution that can mark a server as down if a specific URL on the server is unavailable.

answer is layer 4 and Layer 7

B)
http://www.msexchange.org/articles-tutorials/exchange-server-2013/high-availability-recovery/introducing-load-balancing-exchange-server-2013-part1.html
"question asks for a specific URL,So layer 4 is possible.
In it's simplest scenario a Layer 4 load balancer can check a particular service, for example Outlook Web App, and if it's up and running send all the traffic to it."

What it can't do for a single HTTPS endpoint, or Virtual IP (VIP), is look at multiple services and if one service is down, such as EWS, only route traffic to ones with working EWS whilst still distributing traffic evenly for the remaining services. Layer 4 load balancing just doesn’t have that ability to look at what the client is requesting from the server and make decisions accordingly.

So we have a choice - firstly to assume that if our most important service is up, say OWA, then we'll class that Client Access server as available, or implement multiple VIPs tied to different names; one for each service. The latter is just a little complicated and effectively means we need an IP address assigned to each service like OWA or EWS.




C
layer 7 server load balancing directs the traffic based on contents, such as URL, cookie or SSL session ID.
This is what is required in this scenario

Has anyone passed recently in the United States using this dump?

@BigMick Contoso Q2

yes you have to rebuild index but the command is:
Update-MailboxDatabaseCopy -Identity (Databse copy)DB1\(server)MBX1 -CatalogOnly

Yes just read this Articel
http://technet.microsoft.com/en-us/library/ee633475%28v=exchg.150%29.aspx
>> This example reseeds the content index catalog for the database copy DB1 on Mailbox server MBX1 from any source server in a database availability group (DAG) that has a copy of the database.
Update-MailboxDatabaseCopy -Identity DB1\MBX1 -CatalogOnly <<

BUT, the situation is, you have not this Problem an a COPY ? You have the Problem on the original (aktiv) source DB.

i understand you can ressed this from a active DB to a passive copy a this DB ?

Passed today. 835
Used Sussex last Dump. I did som smal changes on some questions. But if you understand the questions and answeers you will pass.

Failed with 653 using Sussex Dump. 2 new questions.

I am going to start a discussion with a few questions,get in guy's lets discuss and fix
EXAM K Q8

I propose answer BCE as opposed to ABE

C:redirect all the traffic from the internet for mail.contoso.com to server 3

what that really mean's is Point the public DNS MX record to Server 3 ,which should be right

A:export the certificate on server 1 and import it to server 3
what is the point of A if you have to create and install new certificates?it doesn't make sense.


what do u guys think?

BigMick you wrote "Answer is ACF. i dont understand why C if you all ready disabling the send connector for NY office? is that not redundant?" and the reason is in the questio as it states "Each correct anwser represent a COMPLETE solution" so doesn't matter which one you do from the anwser each of that is meet the requierents

Colonel Mustard
In Question 28 the anwser -transportconfig -tlssenddomainsecurelist contoso.com is correct. See http://technet.microsoft.com/en-us/library/bb124151(v=exchg.150).aspx where "The TLSSendDomainSecureList parameter specifies the domains from which you want to send domain secured email by using mutual TLS authentication."

hi all,

is there any update. i will had an exam tomorrow.

I have info that there are already new questions in the exam, does anyone know about these new questions? Apparently 6-8 new questions have already been added.

@MaD
Contoso Q2

yes you have to rebuild index but the command is:

Update-MailboxDatabaseCopy -Identity (Databse copy)DB1\(server)MBX1 -CatalogOnly

Prosware Q4

If the re was an option for Update-GlobalAddressList that would be the answer but as you can see the option is only Update-AddressList

SO i still stay with the with the interval updating in AD

@shadow please could you correct to questions for a new dumb. i really need valid dumb

I passed, but with 7XX.

Failed a week ago ago by a small margin
Used only Sussex, Answers are wrong,go through each section do your own research and try and find the right answer or double checks

got a new question about mounting a recovery data base,One of the options was delete chkpoint file and run eseutil /r e00/a

so just find out ,how to mount a recovery a database to a folder, 2 options were the actual action of mounting the database,but one was pointing to the wrong folder so that was clear,the other option was the one I mentioned above, the other 2 options was -newmailboxrecoveryrequest and -newmailboxexportrequest,


@Bigmick, The question reads "3 POSSIBLE WAYS" so the answers are independent from each other.

Passed and valid...

Used Sessex, Ocean, PDF Lionel Messi, Understanding the question, experience in Exchange Deployment and most important Prayer while taking the Exam :) ..

Goodluck to others :)

@147896325 from Uganda
Can you tell us which answers are wrong

Contoso Q2
The case is "and discover that the ACTIVE COPY of the Database...."
You have to run update-mailboxdatabaseCOPY an a Databse copy.
I think we have Rebuild the content index ?

Prosware Q4
check this site
http://searchexchange.techtarget.com/answer/Exchange-Global-Address-List-updates-not-replicating-to-sites

maybe Update-GlobalAddressList ?

@Craig
Exam K Q8
B,C,E
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx



Can someone confirm this Answers ? or protest :)

742
valid
wrong anwser

I am taking the exam tomorrow, i just had a doubt about this question on sussex dump:

You need to recommend a temporary solution to reroute all of the outbound email messages
through the Miami mail appliance during the planned replacement of the New York mail appliance.
What are three possible ways to achieve the goal? (Each correct answer presents a complete
solution. Choose three.)
A. Modify the value of the SmartHost of the Send connector in the New York office.
B. Increase the cost of the Send connector in the Miami office.
C. Increase the cost of the Send connector in the New York office.
D. Decrease the cost of the Send connector in the New York office,
E. Modify the value of the SmartHost of the Send connector in the Miami office.
F. Disable the Send connector in the New York office

Answer is ACF. i dont understand why C if you all ready disabling the send connector for NY office? is that not redundant?

I think E would be the correct answer because we have to modify the value of the smart host for the send connector in the miami office too... what do you think? maybe i could be wrong.

Hi, if someone has a valid damp, please send it to me on bozinke@gmail.com. Thanks

Failed with sussex @Ocean dumps 668...
all Q from dump but answer are wrong....

failed today with 66x

only 1 new question about recovery a database

i studied with PDF Lionel Messi, Sussex and Ocean

this dump has valid questions but the answers are wrong as other people are saying, i know exactly which qtns they are

I failed today with 684. A couple of questions of exam not in dumps.

Passed exam with only sussex dump. 1 new question.
Above 700
train with sussex dump and go!!

exam k q 11


why would you do step 1 and then do step 2

export from server 1 to server 2

and then install new cerificates mail.contoso and legacy.contoso on all exchange servers?

can anybody assist with any recent dumps please or where to find a valid dump, your hospitality is greatly appreciated

@Jedi and all others who wants to buy Dumps

i try to get (and want to buy this dumps ofcourse) some test Questions from different Companies.. but forget it. I think theye are selling the stuff which the guy here deployed bevor.

And forget the advertising like "100% guarantie..."

Here the original Answer from Testking Support

...Second, we are offering practice questions for Microsoft, not real exam.means our material is for basic knowledge only,

but ===>>>> we don’t give passing or refund guarantee for Microsoft products <====......

check up the testking web site and other

I'm willing to buy a dump/pdf but which is the best though? Mail me in case you do not comment here, jedimasteryodasa@gmail.com I'd be happy to share if I just know which one to purchase but it has to be 100% accurate though.

Failed today with 63x using Sussex and ocean. A couple questions in exam not in dumps.

Question 2 on Incomplite Part.
They writes In the Answer "table is missing" here is missing table

EX1 Exchange 2007 (all Roles)
EX2 - EX3 Mailbox Exchange 2013
EX4 - EX5 Client Access

@Angus
I failed one time so i read any question, i installed a test environment and testet all of this question and try to find out the answer.

I get still round abput 670 (+- some point)

The Problem ist, we have here a lot of wrong answers. AND another Problem is the question are stupid/incomplete ans the answer also.
In some question MS is talking about "install Antispam or Antimalware on CAS Server. Maybe this was an option on the first release or bevor.
imho MS have to check and redesing this ....... Exam.
when you get 650 Points with 52 questions. That means you have round about 17 answers wrong and i think i (and other here) didnt make so much mistakes.

I have next 2 chance this and next week. i hope i will get a better result.

Fail twice with the "Microsoft.Testking.70-341.v2013-08-21.by.Mo.105q.vce" dump.

Failed with ocean, pdf and sussex, 68X, there are a lot of questions wrongs. Anyone has a new dump with the correct answers? Thanks!

Failed with sussex @Ocean dumps 68x...
all Q from dump but answer are wrong....

Hi all,
Wrote the exam today, passed on the edge with 700.
As @Colonel Mustard said, there is very little margin for error.
I only used @sussex questions and I changed the answers of 3 questions.
Changed the answers as @Colonel Mustard and @Lionel Messi indicated they did.
Thanks to everyone's contribution and Good luck to all!

I've been following the comments in this forum for over a month and was hesitant to take the test based on the comments. Eventually I ran out of time and took the exam. I passed with 8xx.

I decided to try and only use the dump that was posted here by Sussex on 12/3: http://www41.zippyshare.com/v/75968499/file.html

All but 1 question on my exam came from this file. I did my best to answer exactly as the answers were recorded in the dump.

If you know the dump and you know why you are answering the questions the way you are you should be able to pass following this dump.

Could somebody kind to send me SUSSEX dump please. Thank you!

Hi..

Please send the correct dumps to kamparth@yahoo.com.
Thanks

Hi there,

Please can you kindly e-mail the SUSSEX dump to resmith2013@hotmail.com

Many thanks.

Richard

hi May, Rudra and HST, happy to hear you passed. Can you please send the sussex dump and ocean pdf please to my email jesusoveryou_khim@yahoo.com

hey guys if you want the links the links to ocean and other pdf's they are on page 2 of the comments,scroll down and go to next page

@@sussex @@Ocean @@May

Can you help me locate the ocean pdf
Please email to Softlibtemp@gmail.com..

Passed, but barely. Can verify that Ocean and Sussex are good enough to pass, but not much room for error. No surprises on the questions, except for one on troubleshooting Outlook Anywhere and the Remote Connectivity Site wasn't even an option.

In Question 28 - with the TLS wit A Datum, I changed my answers to CEF, because the set-transportconfig -tlssenddomainsecurelist needs to be adatum.com and not contoso.com. This is because you are sending to adatum.com and need to force tls from contoso.com to adatum.com, not the other way around.

In Question 100 with the OAB generation, I changed my answer to AB, set-mailbox and New-OfflineAddressBook. This is because it doesn't make any sense to use set-mailbox if you don't have a new OAB to be setting.

I still wonder why we can't upload anymore.
Anyway, this is what has been posted so far. (unmodified)
Good luck all.

Microsoft.PracticeTest.70-341.v2013-29-11-SUSSEX
http://ul.to/v5cc09r5

Microsoft.PracticeTest.70-341.v2013-03-11.by.Ocean.113q.vce
http://ul.to/k0s7n874

Lionel Messi PDF
http://ul.to/nh8xd63h

11q http://ul.to/0pfapsur

Manual
http://ul.to/mcp2sevl

for those looking for these links,If you notice there are a few answers tat differ from the messi pdf and sussex

11q http://ul.to/0pfapsur

Lionel Messi PDF
http://ul.to/nh8xd63h

Microsoft.PracticeTest.70-341.v2013-03-11.by.Ocean.113q.vce
http://ul.to/k0s7n874

Used sussex' dump and failed with 637.
Some questions missing, but are available in oceans dump.

we REALLY need valid dump ;)

regards and good luck

Failed today 651... To much new question. I can't download Ocean's dump on the web site. is it possible to put it on this website?

Thanks

@@sussex @@Ocean : Thanks u2 very much indeed for your sharing.I will try it !!!

@@sussex @@Ocean : Thanks you very much indeed for your sharing !!! I plan to answer the ms exchange 2013 exam ..... :)

Alex from Canada or anyone

Can you help me locate the ocean pdf and Sussex Dump..
Please email to rudtra@gmail.com..

Any help will be appreciated.
Thank you

pass today 7xx
used @Sussex dumps.
All question valid.

@slkom and other they had more than 700.

Did you changed the Answer o did you use the Answer from this dumps ?

Thanks

I'm gonna take the exam next week and find out for myself if all is valid. Only going to use Sussex dump and see if that is valid, cause it makes no sense that from 4-5Dec, in a total of 6 who gave feedback, 2 said it is invalid and 4 confirm the validity.
Guess we will have to take the exam and see for ourselves...

valid!7xx

@ck from Thailand: Brother did you pass the exam with this dump? how do you know its 100% valid? someone said they failed with SUSSEX dump. please explaine and can you please email me the Ocean dump if possible :) thank you!!! (soundshockuk@gmail.com)

hi guys. is there any update ?

Failed today (again) 650.
The Questions are 100% valid. There was NO new Question.
BUT, the answer are (to many answers) wrong.
i dont know what is going wrong, but i checked (technet and other sites) any answer. I was round about 80% of the answer sure.
Design and Manager was very good
Plan, install conf.... Manage Transport -- good
Plan, install conf Client Access -- very bad
Plan, install conf mailbox Role -- bad

i Changed this answers.
Prosware Q2 -- B & C
--> Because SubjectName ob the cert is. Mail.prosware.com. But the public name for this host is oa.prosware.com http://www.msexchangehelp.com/2012/10/set-outlook-provider.html

Prosware Q3 A-C-F

ADatum Q3 -- Layer 4 and Layer 7

Littware Q2
A-D (set-sendconector and retry queue)


I dondt know why but i cant believe tha i make so much mistakes to get only 650.
Did MS had major changes to the Mailbox and Cas role form the first version to today ?
I read that was changes to to Anti-Malware and Antispam "AddOns" that in the first version this was installed on CAS.
But now we HAVE to install/activate this on Mailbox.

I think that is the reason why i didnt get enough points.

Can some confirm this ?

Thanks for any help

P.S.
How can i contact Microsoft to check this Exam ?

100% valid yes or no make your mind up as am not convinced.

Confirmed Questions 100% valid!!!!!
I read dump from Ocean, Sussex

Thank all of you!

Passed this morning with 8xx.

Planning to buy a dump, which one should I? Surepass? Passcert? Testking says they give me only 50 questions. Which one is not a ripoff?

Confirmed Questions 100% valid!!!!!
I read dump from Ocean, Sussex and PDF from LionelMessi

Thank you you all guys, i'm very appreciate.

For sussex dumps: Some of the answers available in the dumps were missing in the real exam. Or in a choose 3 you could find two from the dumps and none of the remaining correspond to what is in the dumps.

We need a viable solution to this exam.

the sussex dumps is not valid. I tried and failed 600 points.

Hi all Guys Questions are 100% valid ............

item 4 of 9, miscellaneous new questions Q3

from technet:
"in exchange 2013, transport high availability is more than just a best effort for message redundancy. Exchange 2013 attempts to guarantee message redundancy. Because of this, you can't specify a maximum size limit for Safety Net. You can only specify how long Safety Net stores messages before they're automatically deleted."

@sussex, thanks buddy!

is Sussex's dumb valid or not. could someone tell

@Sussex Thanks for the link and the dump Sussex.

Thanks sussex......

@Sussex.....waiting for new dump

is the latest dump still on the way?? and what about this one is it good?? let me know

Cheers

Where is the dump with the corrected answers?

sussex still waiting for your dump

http://www41.zippyshare.com/v/75968499/file.html this is other link where i have uploaded dumps with correct answers.......best of luck .....good things is that all questions are still valid......@@@@

I uploaded long back twice i uploaded .....i think its blocked ....i will find other way ......

c'mon @mods could you please tell us why no recent dumps make it to the download section? i don't want to sound disrespectful, but is EC going commercial now?

Can someone please send me the VCE file where its all correct answers? i will then upload it somewhere for everyone to DOWNLOAD. I have web hosting. but i need the file so PLEASE PLEASE PLEASE someone email me the VCE file so i can do the sharing. (soundshockuk@gmail.com) Cheers kind people :)

Litware Q2
What to do when CH-EX2 and CH-EX3 failed to connect to internet.
Preffered Answer is B-E
Why not D-A (set-sendconnector and retry-queue.
In this case all the queued Messages will be send through the CAS Server (like the question Miscellaneous1, Q8)

Failed with this dump. Some new questions, A lot of fail answeeers in this dump. 622/700. Sussex do you have a new dump?

i want to apologize.
I thought files upload was blocked. sorry, sorry, sorry again.......excuse me......

Please use a different way for file Sharing.

Thnaks to all

I tried to upload Ocean's dump as a base dump various times, but nothing gets published. So I assume upload is not working.
@Sussex could you post alternate links for your dump?
Thanks in advance

Sussex any news on when that file will be available??

plz we need the updated dump as soon as possible

sussex just upload it to some free file host buddy.Please.

We are waiting your new file with corrected answers.

Pass 745/1000

hey Mod,
where are all the new Files ? what is the reason for blocking of this ?

Hello Mod,

they are some peoples who wants to share the files here. I post some messages to share this on sharing web sites.
But you are blocking all this !
why ? i didnt see any new file path last days / weeks !

have a good day

Hi sussex

Can you upload the file somewhere on the net (for example a filesharing website like wetransfer.com or public FTP)

@sussex can you change the date also so we know it has been update based on the new day?

Thanks for doing the work for all of us.

@sussex
Can you Upload this file to rapidshare or other FileSharing Websites. We can share this later from this site.

Thank you

I believe misc new questions #2 is wrong.
set-contentfilterconfig will allow adatum to bypass the content filter
set-transportconfig will allow blocking of the phrase "Free Credit Check" except to the Finance DL....