Pass Your Microsoft 70-410 Exam Easy!

Thanks Snowden...

Thank you Snowden & Rod. Study this 2 dumps and pass exam with 730 points. You Great!

Hi
This is Tej from nepal! I just clear CCNA with score 1000/1000 on last Monday and now I decide to step on microsoft , but it's kindof hack to understand things: I just compare cisco and MS , it's hard for me to get digest
Though I m trying to move on

Alhamdulillah, passed today with 8xx thanks MR SNOWDEN

Will there be an update to Snowden's dump? Or is ROD the same but with additional corrections of the answers?

I just passed today with 880, I learned:
- Microsoft.Passguide.70-410.v2013-12-10.by.Mr.L.344q.vce
- Microsoft.Passguide.70-410.v2013-12-09.by.ROD.143q.vce
- Microsoft.Testking.70-410.MCSE.v2013-06-29.by.Snowden.429q.vce
- Microsoft.Visualexams.70-410.v2013-12-09.by.JelliedInfantCompote.115q.vce

Thank you guys! :)

Passed today in the Netherlands with 850.
50 Questions. %80 was ROD, %20 was Snowden. Thanks ROD & Snowden!

This dump is still valid is South Africa, passed today. Thanks SNowden

Still Valid passed today w/910..Studied Snowden and Rod, emphasis on Rods Hot spot, drag and drop, point and shoot, noticed one new question pertaining permissions to a user to a web server. Thanks Snow and Rod

Passed yesterday with a score of 8xx

Studied only Snowden and ROD

Thx guys u are great

775 yesterday

Use the real questions - still valid, 10xs

i have passed today with 7xx marks
most of question from ROD file
riaz from Pakistan
riaziub@yahoo.com

Passed 26/11/13 7XX

Dump is fully vallid. Passed on 14.12.2013, score is 790 points. There was an only new question, and two were a bit amended. I was preparing with SnowDen Real Quesions (256 questions) and ROD - complete edition is mandatory, including "Point and Shot", "Drag and Drop", "Hot Area". I think dump will be valid till 14.01.2014. Thanks a lot to ROD and SnowDen.

took the exam today in PH and passed. 820/1000. dumps 100% valid. thanks Snowden and Rod!

Passed last week in the 700s with Rod and Snowden.

Dump is valid and i got 790 out of 1000 ; though some questions are twisted and IP v6 pls know the concepts and go for the exams; There are 3 QUESTIONS related to IP V6 which are not in the dump..

Bye the way - there are a lot IPv6 q's.

Passed 850+ learning Snowden & ROD yesterday! Failed previously only learning Snowden's dump.

Passed 8xx thanks ROD and Snowden both proved helpful and enabled me to learn more in conjunction with other training materials.

Rod and Snowden is all you need. Some wrong answers are in there so check them thoroughly. Probably a good idea to run lab environments as well and go through the CBT Nuggets stuff. Many thanks to both people who supplied these excellent dumps. Got 9XX

Hi guys,
I have signed up to download this dump but whenever I try to login it keeps telling me my password is wrong but it is not! Any ideas?

Passed today in Belgium with 835.
55 Questions.
Thx to ROD and SNOWDEN.

Remember to first study and then used these questions to prepare for your exam.

On to 411.

Didn't pass today.Only 31 of 55 questions were from this dump.

Failed today with 665marks..last week..i have failed..there are some new questions

Failed today - I read somewhere that if you just study the exam questions out of the 429, which are 256, you should pass. Don't try and take a shortcut like I did. Believe me I guessed my way to a 630. Probably around 50% were out of the 256Q. I'll take it again on Monday with both barrels loaded this time.

Finished with 647 today - very sad. Second shot will be better, i guess.
Still valid to some extend. Had 5-10 new questions. Learned with the real questions from this exam only.

Hello all, if there are questions from WS2012R2 in this dump?

Valid in Australia, 50 questions all from ROD & Snowden dumps. No IPv6 questions this time (I failed the first attempt back in OCT)
Thanks for your efforts in putting these together.

80% valid in UK

is dump is valid somewhere in the 90% range use it to supplement what you have garnered from the exam ref and other sources.

Valid Dump, passed Today with 900+ . Thanks

@•dendrees wat heb jij van snowden geleerd? alle 429 vragen?? of wat anders?

What did you learn? all 429 questions or something elkse?

Dump 100% valid...but with 2 or 3 wrong answers.....passed with 760, i didnt revise the dumps correctly...80% from snowden429Q and 20% from rod143Q......

thanks rod & snowden...

Passed today, valid dump, thanks Snowden

Passed today. I only used this dump and I used the real questions. I would say that only 50% of the test questions I had were from the "real questions" dump on here. I would know all of the "real questions" 100% and be familiar with many of the others and understand the concepts.

I can't download this dumps. Speed is just about 5-10kb/s. Some one help me upload to other links. Thanks

Passed today with 850 pts. 55 Questions, 120 Min. 75% questions from Snowdens Dump. Thanks

This dump is still valid. Passed yesterday with 850. Thanks

Are the questions you had on your exam only from the "Real Questions" section in the dump?

this dump is valid, passed today with 800

Dump still valid. Passed today with 8XX. Thanks Snowden :-)

Passed today with 856 by studying dumps from Snowden and Rod. Thanks for sharing!

Passed today with 850 in Brazil. 100% valid dump Snowden + ROD. Thanks a lot Guys!!

Passed today with a 7xx, using Snowden's and Rods. 5-6 new questions. I'd say 60% came from Rod, 40% came from Snowden. Thank you both!

Hello All,
Passed today with 1000 (No error!)
Tanks a lot to SNOWDEN and others who works a lot to help me to pass.
Once again thank to Snowden for his good explanations
See you at 411!

This dump is still valid. I passed today in Norway and a lot of the questions on this dump and Rod dump were on the exam, tnx Snowden and Rod for your excellent work.

Thanks , i passed the exam today with score 835 , most of exam from the real question

hi i passed 70-410 with 746. this dump is valid but some questions has wrong answers so be care full.

Passed this Friday using the Snowdon dump files.
Half the questions on my exam was from this dump file. I even got the question where pal is one of the answers. But they had corrected the error to be ps1, so all good

I only used the real questions when studying.

I passed the exam with 790. Study ROD and Snowdown. I got only few general questions. Dump has some wrong question. If you study snowdown's real questions and ROD that will allow you to put a good score

Passed last Friday with exact 700 points. So the dump is still valid!
80% snowden 15% ROD and 5% new! Thanks so much Snowden and Rod!

Passed exam today, studied rod and snowden

France (baguette, fromage, croissant...)

Passed today with 835 using Snowden and ROD.

About 50 - 75% of the questions were in these dumps (with some variations). But not all of the answers are 100% true so don't forget to check on internet in case of doubts.

TY and GL for the others. See you on 411 :)

should i study the entire snowdown or the real questions?

Passed today with 790 using ROD and Snowden dump files only! All questions came from either of these two. Thank you to both creators!

passed today with 8xx. thanks so much snowden and Rod! you're so cool!

Took today and passed with 835
Study with Rod and snowden

Took today and passed with 835
Study with Rod and snowden

Snowden & ROD still valid. 100% accurate. Thank u very much.
About 60% of the questions from Snowdens Real Questions.
About 40% questions from ROD. Be carefull : some questions had the same description but different choices.

Thank you Snowden for your excellent work. The question set has moved on though, I'd suggest people look to Rod / ScottCha for updated question, passed today with about 20% questions not on any dumps here

Thanks for sharing. 730/1000,passed

Are here in this exam really 429 questions? so when i want to pass i have to learn the exam from rod to? so almost 600 questions??, am i right

are in this exam really 429 questions?? and the rod 143 Questions? thats almost 600 questions, right? i have almost 10 days to learn this.. mar

Are in the snowden really 429 questions which i have to learn? and the quiestions from ROD.143q
so basically it means, i have to learn 572 questions??? my god.....

is this dump still valid?? there haven't been any new comments for a while nw? I'm taking this exam in 2 days.

r u studied snowden only ( real questions 256 ) OR all sonwden 429

Passed today with 835 ! All questions are from this dumps and ROD !!

Passed today Ireland 850 thanks to Rod and Snowdon. Be warned 30% new questioned. Particularly about examining an hyperv snapshot as a VHD on another server and group policy. Thanks guys

I failed the test today
used this dump and CBT nuggets
there were not many questions from the practice test on the real test
I'll take it again but dont think i will use this practice test

Hi guys, why there is 256 questions in real questions part... and what is the rest.. training guide and questions to review,mcpmag,examref ,,, should i study all of it or what,or just study the first 256 real questions .. please help me guys , i really got to get this exam done ASAP! , thanks..

can somebody help me in finding mcts 70-410 exam dumps........
this site is good but having max 50 questions,not more than that....
Is there any other site to practice........

passed 2 days ago

studied snowden and rod
thank u very much

passed today 8XX.. Snowden real questions + ROD still valid with a few new ones.
thank you both.

I just passed with 78X.
Only 3 new questions out of 54. I only studied Rod & SnowDen dumps.
Thanks for all contributors!!!!!!!!!!!

passed today, u need 2 study rod's and snowden if u wanna pass
thanks rod and snowden.u r da best

This is a very good dump. passed on 16.11.13. got 790
Good work Snowden

Cheers

OK so this is the fist time i am using one of these dumps
i have a question under take selected exams there are 5 tests listed. are these different tests with different questions? do i just need to take the "take tests from selected sections only"?

Majority questions were correct few of the answers are incorrect. Watch out for those.. However pass the exam with 700. Thanks

has anyone passed recently?

Passed but there are new questions.

gd job operchunity

Passed 730 today. Quite a lot of new questions. I'd say around 50%. Lots of powershell questions. Some of the questions from dump with different answers set - some more tricky as i.e. all use same command and there is only different switch. In general great dump, well organised and prepared.

Valid for 60%. Other 40% of exam questions are not in this dump. Beware! But passed with 700+.

Passed this exam today. Thanks snowden!

Studied both ROD and Snowden Real Questions and passed with a 715. I missed some that were on the practice exams, just couldn't remember the answers but I believe all but maybe 2 or 3 questions were from the two practice exams.

Thanks!

just passed. dump still valid is was half n half with ROD n this dump with about 10 new questions. But thanks much Showden~

Hi All,
First of all BIG thanks for ROD and Snowden, for your work.
I passed today with ~800. Dump is still valid.
Used ROD.143 and Snowden.429 for preparation.
See ya in 411.

passed today with 8xx. thanks so much snowden! you're so cool!

Passed today with 745 in Germany. Questions are still valid, I got about 30% new ones. Big THX to Snowden, I only learned his Real Questions.

passed with 715 on 29th october

Used this dump and Rod and passed 70-410 today.

vaild dump
passed today 7 30
snowden and rob.
some questions appeard not in dump but should be enough to p.a.s.s

Allkamdullila, Passed Today, Still Valid this Dump.

I would like to say that I passed the exam with 950 points :)
I did the following to pass
learned and practiced the train signal 410 on a virtual machine
I learned ROD , Anna , Schotta and Snowden dumps all of them are valid you should learn them all and compare between them because there are some wrong answers

Passed today with Snowden and ROD dumps !!!! all questions came those dumps only ,,, !!!

Passed today 800 Thanks for the dump some of the Questions(Real Question Section) on this Dump are still valid in the Exam but please refer to Microsoft.Passguide.70-410.v2013-11-04.by.ROD.143q.vce Most of the questions came out from that Dump Thx for the dump I truly appreciate it

There are some blank answers, and some questions that conflict with each other, but going through helped me pass today with 835.

Passed today with these dumps:

Microsoft.certkiller.70-410.v2013-11-07.by.ScottCha.231q.vce
http://www.examcollection.com/microsoft/Microsoft.certkiller.70-410.v2013-11-07.by.ScottCha.231q.vce.file.html - 90% of all my exam questions where in this dump, BUT BUT BUT, there is alot of wrong answers in this dump, so do ourself a favor and check each question carefully, the question itself is correct, but the answar is not always - But valid dump :)

Microsoft.Passguide.70-410.v2013-11-04.by.ROD.143q.vce - http://www.examcollection.com/microsoft/Microsoft.Passguide.70-410.v2013-11-04.by.ROD.143q.vce.file.html - Same as the dump above - 90% valid, and still some wrong answars - Again read the questions, and google alot :)

Microsoft.PracticeTest.70-410.v2013-06-29.by.Snowden.429q.vce - http://www.examcollection.com/microsoft/Microsoft.PracticeTest.70-410.v2013-06-29.by.Snowden.429q.vce.file.html - This is a huge dump (Sounds wrong), but still have som valid questions.

How i study - Read the book, See CBT nuggets, setup a minor test system, google, and lean the dump by heart (100% ScottCha, 100% ROD and a quick review of the Snowden dump) - I'm also a perfectionist, so it can happen that many would be satisfied with the book and dumps.

Big thanks to all of this community!

Hi all

Passed today with 850. Almost all questions in Snowden and ROD. A lot of Hyper-V and drag and drop and hot area.

Thx for the effort guys! See you @ 411

-----
True answers i found that are wrong in the dumps and i had today for exam:

1-Question about inspecting the VHD from two weeks:
Stop VM, export VM, mount VHD in Server2. (dump say export the snapshot as the third action, but snapshots are exported when you export the VM).

(2- By the way, floppy disk is the only thing that you can't migrate for VM with Migration tool from a 2008 hyperV(another ROD question i think))

3-You got a domain with DC1 and DC2 2012 servers.
you have installed Windows Server 2012 on DC3, you want to make it a new DC.
There is two variations on this questions
one says "you installed AD DS role", then answer is "install-addsdomaincontroller"
one says nothing about AD DS so answer is "install-windowsfeature" cause you need that AD DS binaries installed before making it a DC.

On the road to 411, see ya!

Passed today with 910! (France)

About 80% of the questions from Snowdens Real Questions
About 20% questions from ROD

1 new version of a "route" question (not sure if "change the gateway" is the answer, there is a static route from 0.0.0.0 to 0.0.0.0 in the exhibit, first time i see that.Answered gateway but there should be some variation i guess, duh?)

And the question with "sc config" in the dumps.but no sc config in the answer: an answer with sc privs one with sc "passtrhough", an two answer on "service console" "logon as" (my choice, not sure) and another "services console blabla" (don't remenber the parameter).

Classical questions with WinSxs, removing root-hints, VM booting in PXE(boot order,legacy required,DHCP options 60 and67.), Vm metering, VM bandwith managment (not legacy!), VM timesync (integration services.). really classical and easy questions from dumps, i marked only 6 questions to review at the end, and didn't change my answer on these when reviewing. Easy done in 1 hour only, and i had never used a windows server edition two months ago. If you seriously train, you'll pass easily too, for sure.

Please Help,

If I star Snowden dump with VCE Manager, there are 429 Question displayed. But if i took questions from "Selected Sections Only" total number of question is only 120. Why is that? Please Explain me?

Passed 820 today using Snowden Dump and ROD Dump . thank you ROD see you in 411

STUDY snowden dump and ROD dump and you will pass , good luck

And at last I passed with 805 in South Africa. ALL the questions are from either Rob's latest VCE or Snowden's REAL QUESTIONS.
You know where to get Snowden's VCE, so DON'T ASK AGAIN!! :o)

Snowden:

http://www.examcollection.com/getfile.php?id=16082 - Study ONLY Real Questions

ROD's VCE:

https://www.dropbox.com/s/t1yeupct6ibu121/New%20Questions%20Only%20by%20ROD%281%29.vce - Study all the questions, BUT where Snowden's answer differ, use SNOWDEN'S answer.

Also, take care when you write to read the exams properly to make sure your answer is legit as MS have been sneaky with the questions.

I.e. they have changed the MainOffice/Warehouse subnet question. The answer used to be that the reservations get created in the WAREHOUSE subnet. The correct answer to the question I got was to create the reservations in the MAINOFFICE subnet.

Seeing that I have already passed the 411 it's straight on to 412 now.

Good luck guys - kick some MS butt!!

BB

Passed exam. Questions from ScottCha and Snowden dumps..

sry, it's lst saturday

Passed last yesterday, Studied ScottCha and Snowden dumps, these dumps are still Valid.

PLEASE HELP ME PEOPLE AND ANSWER HONESTLY I NEED UR HELP
Q1 - DO I NEED TO STUDY FROM THE BOOK ?
CUZ I DEPENDS ON THE PRACTICAL AND UNDERSTANDING MORE THAN STUDYING FROM BOOKS AND MEMORIZE THE MATERIAL . AND I SAVED THE DUMBS WITHOUT STUDYING IT . SO WHAT I HAVE TO DO TO PASS THE EXAM ?!!!!!!!!

failed!! got 595 but I must say that all the questions came from the 3 dumps with most votes, but I think most answers are wrong

broken link

As per Muaddib, passed today with 775. EVERY question from these 2 dumps on exam, only 1 IPv6 luck of the draw The one with 4 selections New Route, 12, link, and next hop ::

As per Madibb some questions have different options
Starting a service - I chose sc privlgs which is probably wrong
Changing GP permissions I chose SET-GPPermisson again probably wrong and Scotcha is right modify the OU.
Snapshots - I chose delete from VM, the other possible valid option presented was right click machine and move NOT export - research this one !
IPV6 please disregard my previous link. @Arif is correct.This PDF is really clear download for posterity:
http://rmv6tf.org/wp-content/uploads/2012/10/Infoblox-whitepaper-IPv6-addressing-plan-basic-US-letter.pdf

I have identified at least 15 wrong answers in Scotcha - read the explanations THOROUGHLY in Snowden they are correct.

NEXT.

Passed today with exactly 700, 60% were from snowden's dump,u have to focus on ip v6, shell n gpo. good luck for all :)

i faild with 525 and i took snowden and others :( . what i have to do ;(

I failed today i score 665

Passed today with 775 using snowden and scottcha dumps. 100% valid but a lot of questions slightly changed. Also some wrong answers in dumps I think.

@Glennn, from the way I understand it, it is a 128 bit address divided into two parts the first 64bits comprise the network ID and the last 64bits the host ID . the host ID kind of take care of itself (using the EUI64 or modified EUI64)

While the subnet ID is always the first 64bits minus the Global prefix bits .

@mostapha check schoptta dump and tell us if the 22 question are valid into it

passed yesterday with score 700 this dump is valid in egypt but there was about 22 question outside this dump .I focused on snowden dump i didn't study Scottcha dump at all

Dear friends, I would like to take this exam next week. I could see most of the dumps posted here are commented as valid, however everyone says answers are wrong.

Would you please guide me which dump has most of the correct answers which will help me to pass the exam

Pass today with 700 points.
Almost all the questions were from here and Scottcha. In fact, I think Scottcha's dump comprises all the questions from here.
I did not use all the answers from Scottcha.

Looking at Scotcha the correct answer is 64, however the link I posted suggests that only the first 48 bits are dedicated public so I don't know where the (64) is coming from as opposed 48. Can someone please clarify this for us? It is not enough to know the answer, I need the logic behind it.

Hi. Also passed this morning with this dump. Still valid

I have the same question of glennn and arif

Is 64 or 1024 host?

Hi Arif I'm very confused then.
According to the article, first 3 blocks are from the ISP(48), so if the mask is 58, that gives 2^10 ? Where are you getting 64 from ?

@Glenn

It should beb 64-58 = 6bits you can use for your hosts.

That is 2^6 = 64

I too received Matty's question about IP subnetting and found this link:
http://www.techexams.net/forums/mcts-mcitp-windows-2008-general/64513-any-good-ipv6-subnetting-howtos.html.

Based on the article, 2001:xxx:xxx:xxx::/58 would result in 58-48 = 2^10 or 1024 subnets. Please correct me if I'm wrong ?

Made last week with score 805. Most answers from scottcha. I made scottcha and snowden.

Just passed this morning, with a mid-800 score .

Dump is still valid.

I only used two dumps, Scottcha and Snowden. I focused on Scottcha as it has more relevant questions. But Snowden's answers and explanations are much better.

When in doubt, check the answers on Snowden and the explanation would most of the time satisfy.

Had 5-7 on the hot area, 7-10 on the point and shoot, about 5 drag and drop. No new question, and probably one or two questions that had the dump's correct answer not part of the option.

------------

One question had in the exhibit a text file that should be exported in LDIFDE.
What Scottcha's had was a CSV file.

-------------------

Your network contains an active directory domain named Contoso.com. The domain contains a server named Server1 that runs Windows server 2012.
You create a group Managed Service Account named gservice1. You need to configure a service named service1 to run as the gservice1 account.

How should you configure service1?

A. From Services Console configure the recovery settings
B. From a command prompt ,run sc.exe and specify the config parameter (Dump's Ans)
C. From Windows PowerShell,run Set-Service and specify the -PassThrough parameter
D. From a command prompt ,run sc.exe and specify the sdset parameter

This question came up but the supposed answer was not there, instead it had this .
"From a command prompt ,run sc.exe and specify the priv parameter"

-----------------------

In the hot area question where you have to identify the actions that can be performed by User1 and User2, being part of either Group1, Group2 and Group3, I had the exact questions except on the "Share Permissions" where every Group has "Full Control"

You have a server named Server1 that runs a Server Core installation of Windows Server 2012. Server1 is configured to obtain an IPv4 address by using DHCP. You need to configure the IPv4 settings of the network connection on Server1 as follows:

IP address: 10.1.1.1
Subnet mask: 255.255.240.0
Default gateway: 10.1.1.254

What should you run?

Set-NetlPInterface (Correct Ans)
netcfg.exe
New-NetlPAddress
msconfig.exe

This one should be New-NetIPAddress.
http://technet.microsoft.com/en-us/library/hh826150%28v=wps.620%29.aspx
http://technet.microsoft.com/en-us/library/hh826125(v=wps.620).aspx

You deploy a Server with a GUI installation of Windows Server 2012 Datacenter. From Windows PowerShell, you run the following command: Remove-WindowsFeature ServerGui-Shell. In the table below, identify which tools are available on Server1 and which tools are unavailable on Server1.

Make only one selection in each row. Each correct selection is worth one point.

The Dump Answer is :
File Explorer - Unavailable
Internet Explorer 10 - Available
Microsoft Management Console (MMC) - Available
Server Manager - Available

Shouldn't the answer be :
File Explorer - Unavailable
Internet Explorer 10 - Unavailable
Microsoft Management Console (MMC) - Available
Server Manager - Available

-----------------------------

Your network contains two Active Directory forests named contoso.com and adatum.com.
A two-way forest trust exists between the forests.

You have custom starter Group Policy objects (GPOs) defined in contoso.com. You need to ensure that the same set of custom starter GPOs are available in adatum.com.

In the table below, identify which action must be performed for the starter GPOs container in each forest.

Make only one selection in each of the rows. Each correct selection is worth one point.

The Dump Answer is :
Copy - Adatum.com
Backup - Adatum.com
Paste - Adatum.com
Restore from backup - Adatum.com
Import Settings - Contoso.com

---------------

Q14 From hot area - The settings of the GPO - the exibit also shows members of group1(just user1) - success will bw audited -YES,Failuer -NO, Success for user2 - NO, Failure for user 2 - NO

This one I agree with Josh, only successful attempts from members of Group1(User1) are supposed to be audited right? Or am I missing something because the dump says otherwise?

Thanks NAMman, I'll be having mine on Tuesday, will post the update here after.

@arif

My exam has been postponed to next week Tuesday. (SHIT!)

But about the questions:

1. "Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 and a domain controller named DC2. All servers run Windows Server 2012. All domain controllers are configured as DNS servers. On Server1, you open Server Manager and you add DC2 as another server to manage. From Server Manager on Server2, you right-click DC2. You need to ensure that when you right-click DC2, you see the option to run DNS Manager.

What should you do?"

The correct answer is:

- On DC2 and Server1, run winrmquickconfig

2. "Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012. You need to create 3-TB virtual hard disk (VHD) on Server1.

Which tool should you use?"

- DISKPART would only make sense to use after you have created the new vhd/vhdx ;-)

3. "Your network contains an Active Directory domain named contoso.com. All client computer accounts are in an organizational unit (OU) named AllComputers. Client computers run either Windows 7 or Windows 8.
You create a Group Policy object (GPO) named GP1.
You link GP1 to the AllComputers OU.
You need to ensure that GP1 applies only to computers that have more than 8 GB of memory.

What should you configure? "

You are correct. You must use the WMI filter to create a custom parameter.

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012. You need to create 3-TB virtual hard disk (VHD) on Server1.

Which tool should you use?

A. Server Manager
B. Diskpart
C. New-StoragePool
D. New-VirtualDisk (Correct Ans)

--------------------------------

Why not use Diskpart?

Your network contains an Active Directory domain named contoso.com. All client computer accounts are in an organizational unit (OU) named AllComputers. Client computers run either Windows 7 or Windows 8.
You create a Group Policy object (GPO) named GP1.
You link GP1 to the AllComputers OU.
You need to ensure that GP1 applies only to computers that have more than 8 GB of memory.

What should you configure?

A. The Security settings of AllComputers (Correct Ans)
B. The Security settings of GP1
C. The WMI filter for GP1
D. The Block Inheritance option for AllComputers

-------------------------

In this question, can't we use the WMI filter instead?

Thanks NAMman, what about the below questions . the questions look similar yet the answers are different . why not install Role Administration Tool on both of them?


Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 and a domain controller named DC2. All servers run Windows Server 2012. All domain controllers are configured as DNS servers. On Server1, you open Server Manager and you add DC2 as another server to manage. From Server Manager on Server2, you right-click DC2. You need to ensure that when you right-click DC2, you see the option to run DNS Manager.

What should you do?

A. In the domain, add Server1 to the DNS Admins group.
B. On DC2 and Server1, run winrmquickconfig.
C. On DC2, install the Feature Administration Tools.
D. On Server1, install the Role Administration Tools. (Correct Ans)


Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and a domain controller named DC2. All servers run Windows Server 2012. On DC2, you open Server Manager and you add Server1 as another server to manage. From Server Manager on DC2, you right-click Server1 as shown in the exhibit. You need to ensure that when you right-click Server1, you see the option to run the DHCP console.

What should you do?

A. On Server1, install the Feature Administration Tools.
B. In the domain, add DC1 to the DHCP Administrators group.
C. On DC2 and Server1, run winrm quickconfig. (Correct Ans)
D. On DC2, install the Role Administration Tools.

The answer to the question:

"Your network contains an Active Directory domain named contoso.com. The network contains 500 client computers that run Windows 8. All of the client computers connect to the Internet by using a web proxy. You deploy a server named Server1 that runs Windows Server 2012. Server1 has the DNS Server server role installed. You configure all of the client computers to use Server1 as their primary DNS server. You need to prevent Server1 from attempting to resolve Internet host names for the client computers.
What should you do on Server1?"

Not one of the two are correct in this dump.
The actual answer is:

- Create a primary zone named ".".

Or the other possible one is:

- Remove all root hints

I am writing tomorrow. Will tell you guys how it went with the use of this dump.

@Paul
See http://www.hyper-v.nu/archives/hvredevoort/2012/04/windows-8-storage-and-hyper-v-part-3-the-art-of-creating-a-vhd-2/
Diskpart and Computer Manager are the answers if you ask me:)

Your network contains an Active Directory domain named contoso.com. The network contains 500 client computers that run Windows 8. All of the client computers connect to the Internet by using a web proxy. You deploy a server named Server1 that runs Windows Server 2012. Server1 has the DNS Server server role installed. You configure all of the client computers to use Server1 as their primary DNS server. You need to prevent Server1 from attempting to resolve Internet host names for the client computers.
What should you do on Server1?

Create a primary zone named ".".
Configure the Security settings of the contoso.com zone. (Correct Ans)
Create a zone delegation for GlobalNames.contoso.com.
Create a stub zone named "root".

Create a primary zone named "root".
Create a primary zone named ".".
Create a stub zone named "root". (Correct Ans)
Create a zone delegation for GlobalNames.contoso.com.

--------------
How about this question? Which is the correct answer?

@Scottcha and others, please explain why some questions have varying correct answers, does this mean the answers given are incorrect or the answers vary depending on the provided options :

Your network contains an active directory domain named Contoso.com.

The domain contains 100 user accounts that reside in an organizational unit (OU) named OU1.

You need to ensure that user named user1 can link and unlink Group Policy Objects(GPOs) to OU1.

The solution must minimize the number of permissions assigned to user1.

What should you do?

Run the Delegation of Control Wizard on the Policies containers
Run the Set-GPPermission cmdlet
Run the Delegation of Control Wizard on OU1 (Correct Ans)
Modify the permission on the user1 account

Modify the permissions on OU1. (Correct Ans)
Run the Set-GPPermission cmdlet.
Add User1 to the Group Policy Creator Owners group.
Modify the permissions on the User1 account.

Run the Set-GPPermission cmdlet. (Correct Ans)
Run the Delegation of Control Wizard on OU1
Modify the permissions on the \Contoso.comSYSVOLContoso.comPolicies folder
Add User1 to the Group Policy Creator Owners group.

@ ScottCha
Please let me know the correct dump once done your Exam on this Saturday
Good Luck!!

Q 31, Q 218, Q 230 and Q 234 from Snowden
can anybody explain the similarities and difference of the questions? As Answers of the questions differ.

hello i wish u ScottCha bet of luck tell us the questions LOL good luck

Has anyone checked the answers from the ScottCha dump? Are there many with wrong answers?

I'm taking the exam this Saturday.

All the questions are valid and updated. If you trusted the answers on this dumps you might get the score of 700 below. Just a friendly reminder.

Hello guys im going to make this exam is this valid or the ScottCha passguide exam better?

And u ScottCha have u passed?

Many thanks

Sorry for double post, I have a copy mistake. It should be "this dump and the dump from ScottCha are still valid." ;)

That was a close thing, but I passed with score 700 today.
In Germany this dump and the dump from Snwoden are still valid. It covered most of the questions, I had only 3-5 new questions. If I had learned intensively with the dumps I may have gained a higher score. Both dumps are still valid with 80-90%.
So thanks a lot for this hard work!

@ ScottCha
thanks man

Here is the link to the latest from passguide.

https://www.dropbox.com/s/i5pj360n8199onp/70-410-ScottCha-All-Questions-Working-338q.vce

Again, I have not personally verified the answers, however, this is what I will be studying from.

If you see any corrections please let me know and I'll update as long as I can verify them.

Hopefully they'll post this test when I upload it.

use the one form scotcha. That one has some from questions from this dump and new questions. I think that is the most recent one

I given exam on 15 Oct 2013. Failed with 680 marks. 50% questions are from this dumps and there are many questions which is not covered.

PLease let me know which dumps are valid for India

@ RC from Unknown
check out:
http://technet.microsoft.com/en-us/library/cc778414(v=ws.10).aspx
the correct answer must be LDIFDE.

Passed today with 715! About 50% of the questions from this dump.

Passed today with 790.
The test had 52 questions and about 40% or 50% were included in this VCE (but I only studied about 330 of the 429 questions). New questions I saw include cloning DCs (1 question) and some (about 10 or more) of powershell commands.

Hi Teemak . visit those links bellow, you will get everything you need

http://www.cbtnuggets.com/?gclid=CMGBorbhkLoCFcRXpQodYhwA8A
http://www.trainsignal.com/?gclid=CKy3j8PhkLoCFY5fpQodIw0AEQ

passed. many of the questions from this dump.

Pass today 715/1000 50q. 90% questions from there and Scottcha.

Dump still valid for Germany! Passed 2day, about 70% questions of this dump!

@Rc, LDIFDE is the answer

I found one of the question funny, ExamRef, Q10
What can be used to add, delete, or modify objects in Active Directory, in addition to modifying the schema if necessary?
A. DCPROMO
B. LDIFDE
C. CSVDE
D. NSLOOKUP

Correct answer should be B. Where the tips is showing correct. However the module stated D is correct answer. Please take note guys.

Hi everybody passed today 760 used:
1. Microsoft.PracticeTest.70-410.v2013-06-29.by.Snowden.429q (small number of errors)
2. Microsoft.Yesuse.70-410.v2013-09-23.by.nofenofe.336q (large number of errors)
3. Microsoft.Exactquestions.70-410.v2013-10-01.by.Anna.336q.vce (large number of errors)
4. All questions new and old was from the top three vce's

I appeared in exam today but failed. 60% are valid.

This dump is still valid. I passed recently in the US and a lot of the questions on this dump were on the exam. Study, verify the answers for yourself using MS TechNet and blogs and watch for subtle things in the question that could throw you off. Example: There was a question on the exam that made reference to permissions for a folder named Share1 and there was a diagram with NTFS permissions on it. One of the answers was to check the share permissions but nothing in the question ever said the folder Share1 was shared.

Hi guys! ***PLEASE ATTENTION***

All the questions in dumps we face on the exams but we still fail. I think answers are not correct. We find the right answers someway.

Any suggestion about it?

Still valid, 4 new questions, many bad answers.
One of them, how can you add printer drivers for a new printer that need v4 printer drivers, I chose: AddPrinterDriver but probably was wrong, another option is Add the printer driver using Printer Services on Server Manager

I passed yasterday with 730 in score , but only 15 questions from this dump

Passed today with 805 points in Poland. This dump is valid although there were only about 30-40% questions from it in the actual exam.

A tip for everyone who has not yet taken the exam: do as many dumps as possible because MS has prepared a huge number of questions. Good luck!

passed exam today but only with 735 points, many new questions.

This dump is pretty much valid from Malaysia. roughly 80% question are from here. pass for 805. Be careful with other dumps that have the same question from here though, because their answers may vary and i'd advice you to make some research if you're not sure of the answer's validity

Still valid got around 15 questions from this dump

I failed today i score 595 10 to 15 questions are here. soi guess it stilll valid.


from: germany

Is this dumps still valid in india?

Failed with 665. A lot of IPV6 Subnetting, Routing and Powershell questions. I would say around 10. About 15 questions were found in this dump.
This dump is not valid in Pakistan anymore..

Dump 90% valid from Brazil ..

Failed with 696. A lot of IV6 Subnetting and routing questions. I would say around 10. About 15 questions were found in this dump

Passed with 700 last weekend. 50% was covered

@adam and @wee, which dump did you study?

I failed with 625. new question. many questions from this dump but not sure answers are correct?!

665 today.. Many new questions about PS, just 1 or 2 about IPV6 !

I feel 240(q120) should be D. GPO Status, not A. Loopback processing mode

Just passed with 715. This dumps is still valid. I got around 30 questions out of the 52 total questions from this dump. I repeat, this dump is STILL VALID. I only got around 3 questions of IPv6 and a around 10 or 12 of PS. Around 10 new questions.

Took it this morning. This dump is about 50% accurate. Good chunk of new questions. Only one ipv6 and lots of powershell.

80% Valid dump pass'd 2day.

Dump is 70% accurate. Lots of new questions and rephrased. Make sure you know IPV6 inside out and powershell AD commands - Passed Today UK

Failed today. Only 10 from this dump. Some about subnets iP v6 (See comment Kuga from Italy). Rescheduled for 4 october. Now back to the book.

hi i have exam on 25th sep i prepade this dums or bruse so lets see hope i will pass..

I'm scared reading the latest posts. Someone he has recent dumps to succeed? Please send it to us

I passed the exam today, few questions 25% of this dump.
For the rest other questions, hyper V/ power.. etc etc really.

Take this exam to test your skills, if you do this good ! than you will pass !

Failed today with a 630. Studed the Jelly test and some of Snowden. Seems to be a mixture of these two test along with new material. Alot of Powershell/Hyper-V migration/GPO rights/delegation.

Passed today (714). About half the questions were from this dump.

Passed today. About half the questions were from this dump. Some were just reworded. Make sure you know the powershell commands, had atleast 6 questions on that. Understand the HyperV stuff.

Thats kinda funny cause the first thing my CBT nuggets told me is that you dont need to be a powershell blackbelt for this exam

I just passed today.
fyi You are not going to pass by memorizing answers from these dumps. Go through all the technet articles for each question and learn about how the thing works in more details.
Also lwearn to do everything from powershell. These exams have a lot of questions regarding this. DNS/hyperv.

Dump not valid. only 4 or 5 questions out of 55.
I had about 15 powershell questions and not the simple -addWindowsFeature. Furthermore I had about 10 ipv6 questions.
The rest was hyper-v/print server/ntfs etc.
Advice: learn powershell commands by head...

Passed today with 760.
About 50% new question .
Dump is still valid to study but it is not enough to pass the exam.

Failed today 682% about 50% from this dump and some new question 2 new question in ipv6 some new questions in hyper v powershell.
This dump still valid.