Pass Your Microsoft 70-413 Exam Easy!

By the Great of Almighty ALLAH,Today I have Passed 70-413 Paper,I have already Passed 70-414, so thatswhy Now I am MCSA & MCSE 2012 Certified, Dumps are 100% Valid :) :):)

Thanks Esha & Muhammad Irshad.

By the Great of Almighty ALLAH,Today I have Passed 70-413 Paper,I have already Passed 70-414, so thatswhy Now I am MCSA & MCSE 2012 Certified, Dumps are 100% Valid :) :):)

Thanks Esha & Muhammad Irshad.

Valid, Passed with 933/1000. "NO NEW QUESTIONS"

This Dump is still valid. But Some Questions are wrong answer.
I passed this exam 3 Aug 2013 with 900/1000 Marks

Thx buddy, passed today..bless

Can any one confirm whether dump valid in pakistan i have an exam on 6 aug

pass today with 733 becarfull

This dump is valid - passed 800. Thanking you for all.

Passed today with 900 ,dump still valid

thanks soooooo much passed today with 833 marks,dump still valid

thanks soooooo much passed yesterday with 933,dump still valid,all 51 questions from this dump,
i remember one question choices were a little changed,like this

in question that say ... replication..if a dc in site one is available
if a dc in site one are unavilable

*the choices were delete site link 2,delete site link 3,delete site link 1 and create one smtp site link..

and i choose delete site link 2.

definitely a few questions wrong in this dump but still valid. just passed the exam with 900 and the questions comes as is in this dump but then again we only aim for 700 so thanks for the dump guys.

from israel pass with 833

This dump is OK. Passed on 18/07 with 8xx. 51 questions and all were from this dump. But I get 8xx, so there are errors in the dump. However, it's enough to pass. Big thank you to poster Esha.

Guys What is the Correct answer for this Case Study Quesion ???
you are planning the implementation of two servers that will be configured as RADIUS Servers.
You need to recommend which configuration must be performed on VPN Servers.
The Solution must must meet the technical requirmetns.

What should you do each VPN Server?

A. install the helath Registration Authority Role Service
B.Add a RADIUS client
C.Enable Direct Access.
D.Modify the authentication Provider.


Either B or D ???

Some dumps suggests as B and other as D. Please guys pick the rite one.

ALHAMDULLILAH Passed today with 866/1000 marks.
Dump still valid in Pakistan.

Scored 866 , All Question From Dumps. But Not Obtained Complete Marks.I Think Some Answer In The Dumps are Incorrect.

imran how you get this dumps becous when i hve to open this Esha dums its contain only 68 questions??
im confused

Imran from Pakistan.what changes did you make?

Pass with 900

thanks dump maker

Valid enough to pass the exam. Passed with 776 on 06.07.2013.

This dumps is not open in my vce software, I don't know what's the problem. plz any one give me some idea.

Haaaaaa I'm sorry sir Esha. Please Mr. Esha to clarify the questions that carrying answers mistake to avoid them during the exam and you very much thanks and appreciation .

Please Mr. Omar to clarify the questions that carrying answers mistake to avoid them during the exam and you very much thanks and appreciation .

take this exam twise in 2 days
first was with the answers of dump bean (to bad 666 score)
the i used this one with some modifications and had 800

some answers in the exam must be wrong answered.
points i take to score 800
case 1
q7 i take b (d is possible correct)
q9 i take b (discussions are there about c)
case 2
i quess all answers are correct
mixed questions
1 i take c (first time was b)
4 both times i take d (kerberos and multiple forests is not done) i quess the answer in the exam take d as wrong answer
5 i take d (first time i take c, but in answer 2 the answer is also set the domain to local, no discussions are setup for this answer)
8 ac (first time i take abc) b is not needed test environment
13 c (first time d)
24 server 2 install, server 2 folder, server 1 register, send, receive (send receive doen't matter the time out is waiting for each other for 5 minutes)
be aware of install on server 2 at first step
34 b (first time i take a)
42 be (first time bde)
55 d (first time a)
so in the 2nd exam i got 144 points more, withe the questions, most of them must be correct.
good luck with prepare of this exam

start exam a .After you finish first case study then click end exam and go to second case study. after you finish second case study . select exam b and start exam

pass with 833.all question from this dump. some of the answer is wrong.

Dump is still valid in China and there is no change in the exam. All the question came from this dump only. Only the Answers sequence is change. Got 9xx. :)

Are there any new questions? Have this exam on Wednesday

guys, anyone can teach how to answer the case study question.
Tuesday I having exam for this

Pass today with 870 marks

valid in egypt pass today with 900 all Q from this dump

الحمد لله

dump is valid in Italy

exam questions are valid but answers are not (in UK)

Dump 100 % valid . Scored 9xx though .

How to test the validity of the questions'm going this week?

Sorry, of course I meant D) Deploy UAG to CONTOSO.com - not litware.
Q34) I'm not sure. I think I selected 5 sites and 3 links in exam -
it was wrong concerning score report.
Now I would tick, create 5 sites and a single site link.

@MCSA
your 2nd question. it is part of Designing/Implementing
AD Infrastructure logical where I had 100%.

MS UAG supports Kerberos Contrained Delegation (KCD) to enable single sign on feature. With KCD users can sign on with certificates, smartcards to access the UAG and the server(s). But there is a prerequisite: Users, UAG and servers need to be based in the SAME AD
environment / forest.
So A+C would be no suitable solution. Comparing answer B/D it seems the best choice to install a 2nd Forefront (UAG) Server in the perimeter network of litware.com. (Same forest as the EXCHANGE Orgainzation).

@MCSA
My dump has 68q + 2 x 12 Case Study = 92q?

Concerning your first question (part of Designing/Implementing AD Infrastructure logical)
b) In order to support claims based authentication, we need to enable support for Dynamic Access Control and Kerberos armoring settings in the Default Domain Controller Policy. Dynamic Access Control requires update of the Kerberos Clients and KDC in order to support the new authentication types. We don't have to raise the domain functional level to Windows 2012 server, we would just add W2012 Servers to the domain:

If support (b) is enabled the W2008 + W2012 Servers already start to announce the Domain support for claims based authentication, Dynamic Access Control and Kerberos Armoring.
By adding the W2012 (e) servers we don't have to upgrade domain functional level and wait until this process is done. We can already start using claims based authentication right away.
See http://technet.microsoft.com/en-us/library/hh831747.aspx, scroll down to the table, see supported configuration, which is valid for W7 Clients too.

what is correct answer as these questions have different answer in every dump.

Its question # 34

Your network contains an Active Directory domain named contoso.com.
The physical topology of the network is configured as shown in the exhibit.
(Click the Exhibit button.)
Each office contains 500 employees.
You plan to deploy several domain controllers to each office.
You need to recommend a site topology for the planned deployment.
What should you include in the recommendation?
More than one answer choice may achieve the goal.
Select the BEST answer.
Exhibit:
38
A. Five sites and three site links
B. Five sites and one site link
C. Three sites and three site links
D. One site

and

Your network contains an Active Directory domain named contoso.com.
The functional level of the domain and the forest is Windows Server 2008 R2.
All domain controllers run Windows Server 2008 R2.
You plan to deploy a new line-of-business application named App1 that uses claims-based authentication.
You need to recommend changes to the network to ensure that Active Directory can provide claims for App1.
What should you include in the recommendation?
(Each correct answer presents part of the solution. Choose all that apply.)
A. Deploy Active Directory Lightweight Directory Services (AD LDS).
B. From the Default Domain Controllers Policy, enable the Support for Dynamic Access Control and Kerberos
armoring setting.
C. From the properties of the computer accounts of the domain controllers, enable Kerberos constrained
delegation.
D. Raise the domain functional level to Windows Server 2012.
E. Add domain controllers that run Windows Server 2012

Hello what is correct answer for this one?


Your network contains an internal network and a perimeter network.
The internal network contains an Active Directory forest named contoso.com.
The forest contains a Microsoft Exchange Server 2010 organization.
All of the domain controllers in contoso.com run Windows Server 2012.
The perimeter network contains an Active Directory forest named litware.com.
You deploy Microsoft Forefront Unified Access Gateway (UAG) to litware.com.
All of the domain controllers in litware.com run Windows Server 2012.
Some users connect from outside the network to use Outlook Web App.
You need to ensure that external users can authenticate by using client certificates.
What should you do?
A. Enable Kerberos constrained delegation in litware.com.
B. To the perimeter network, add an Exchange server that has the Client Access server role installed.
C. Enable Kerberos delegation in litware.com.
D. Deploy UAG to contoso.com.

Thanks.

Passed today in Holland 8XX score, use r0gu3_ vce. Thanx r0gu3_ and Esha

@r0gu3_ Thanks for your reply.

Why this file has not 92 questions? Please help

Please anyone help to find correct answer. Everyone has different answers

Your network contains an Active Directory domain named contoso.com.
The functional level of the domain and the forest is Windows Server 2008 R2.
All domain controllers run Windows Server 2008 R2.
You plan to deploy a new line-of-business application named App1 that uses claims-based authentication.
You need to recommend changes to the network to ensure that Active Directory can provide claims for App1.
What should you include in the recommendation?
(Each correct answer presents part of the solution. Choose all that apply.)
A. Deploy Active Directory Lightweight Directory Services (AD LDS).
B. From the Default Domain Controllers Policy, enable the Support for Dynamic Access Control and Kerberos
armoring setting.
C. From the properties of the computer accounts of the domain controllers, enable Kerberos constrained
delegation.
D. Raise the domain functional level to Windows Server 2012.
E. Add domain controllers that run Windows Server 2012.

Thanks.

thanks to ALLAH.
pass 730 but case study 2 question ( 15 q) not include in this dumps ,

Hi r0gu3, Thanks for the reply, My VCE version is 3.1.1, in this dump Esha has mentioned that 92 question but i can find only 82. exam A has 14 questions which is related to Contoso case study and exam B has 68 questions. so all-together its 82 questions. i couldn't find the 2nd Case study. I just want to know that is there is another case study or not??? Please if you can update me. Thanks in advance. cheers!!!

@Sam which version of Exam Suite are you using ? I think you need 3.01 at least. The dump format isn't recognized by the mobile version too.
Try opening 2 instances of Exam Designer. One with the Dump (A) and one where you create a new exam (B). Go to (A) Mix Questions, Question Set1. Mark Question 1-68 (not Question set1), click Edit - Copy. Now paste them in (B). Do the same with the case studies, mark only questions, not "Testlet1" .
You gotta copy case study description in each q. Only way I know. Should convert without problems to mobile version or a dump withou the new Case Study/Testlet format.

@MCSA - Look closely at the dump I provided on uploaded. It contains 3-4 different answers than in Eshas dump + those 2 changes I mentioned in my last post. So 5 - 6 q's changes applied in total - based on a well known german paysite. 8 people reported scores 940 - 962. We took the exam in german language and did not get any case studies - but Eshas answers look perfectly flawless for the case studies.
I did not bother changing explanations in the dump - If you have any q related to the changes just post here and I'll try to explain.
For score see http://ul.to/mxdv7zai
Best luck to you.

pass 8XX thenks !!!

@r0gu3
congrats!!!

So there are only two new answers? Could you please share more correct answers as your score is good one. I just want correct answer for better understanding.

Me and a friend passed 962 using this: http://ul.to/h3or7cwg
Had no case studies. You still need to apply following changes to the dump:

1) On Server2 register the Windows Server Migration Tools
2) On Server2 create a deployment folder
3) On Server1 register the Windows Server Migration Tools
4) On Server2 run the Receive-SmigServerData cmdlet
5) On Server1 run the Send-SmigServerData cmdlet

Q65) Server1: Conditional Forwarder, Server2: Conditional Forwarder !

Shukr Alhumdulilah. i hve passed this exam.

@teto and eim23x

Congrats guys passing exam.

Could you please help us to find wrong answers and correct them?
or any other guy?

Please.

I have passed today Score: 910
Very valid dump.

Passed today 940 in Israel still valid

546 fail today

Still valid, I passed the exam today with 9XX.

passed the exam with 850 wit this dump.answers are much scary . all the answer are not correct . be carefully .

Passed the xam by today . Still valid dump. 10-12 questions new.

I have passed today Score: 910
Very valid dump.

Thanks

I have passed today with this dump.

My score was 880. Rest assured in using this dump

Tks everyone.

Testlet2 , Q6: there is no answer given!!
or it is just me on the vce

Passed today with a 910. Used the answers from this dump. This dump is scary accurate!

I took the exam today and passed with 8XX.

Still valid in South Africa.

I took this exam on last Saturday - 1st June & passed with 820 Marks. All questions from this dump only but there are 12 wrong answers.

goh ---would submit correct answers of the wrong one

Passed today on Malaysia with passing score790. Good job

Dump is valid in Serbia. Passed today with 880. No new questions, but some answers are wrong.

Thanks Still valid in Pakistan cheers

Q32 : Can someone please explain why we should recommend only one image ?

Pass yesterday still valid.

Now again im not too sure on the Send-SmigServerData first then Receive or vice. Both scenarios will work. Im guessing if you on server already (since you had to register the mig tools ".smigdeploy.exe") you might as well send first. But then again, you can run receive from server2 before you send.

This maybe a question that doesn't count these two at the end. What they do want to see however is the installation of migration tools first, then a deployment folder, on server1 register the tools and prepare for migration.

*stumped

@ssuper2k

Well if that were true, then everyone would be getting 1000/1000 :)

Hi Micheal,
I've sent you the link to download the software. Please check ur inbox

Passed today! Question still valid.

passed to day with 790 still valiad الحمد لله رب العالمين

Ok bryan. so there are two ways of 'transporting' with WDS.
http://technet.microsoft.com/en-us/library/jj648426.aspx
I just read the left column and I remember with RIS you needed AD.
--
The qpos qs says you need to apply gpo1 to all computers, so you have to enforce it just in case there are more ous blocking inheritance. not very clean but you need to do this or link it to the ou as well as to any other ou that might be blocking.
That's the downside of questing the answers I the vce. you can get it wrong!!

@ssuper2k in the GPO's, by linking the GPO1 to the Domain it would be applied to all the users already. if there were multiple OU's that had Block Inh. and you want it to be applied to all the users in the Domain, Enforce. But they didn't say that and they told us to select 'the BEST answer' lol. bunch of asses

@ssuper2k

ok so for the WDS you do not really need ADDS, we can use the *pain in the ass* transport server which does not require ADDS but it does require DHCP for the sake of PXE and DNS cause we need to contact servers by names.

As for the GPO questions, yes its true they do say that, but only to the clients in OU, there kinda insinuating that we cannot link the same GPO's to multiple OU's. If they had stated that it would be applied to *other OU's which also have block Inh. then ok enforce. Microsoft exams are very tricky with this, ive been teaching these course over the past 4-5 years and they do this every now and then. again personally I would just link it, so much easier and if I didn't want this applied to anyone else, it would be my first option.
Open for discussion guys what do you think??

As for my last post you're right I meant to say Receive first then send. You can even specify a password with receive, just make sure you have your folders shared!! :)

Regardless ssuper2k congrats on your test!!!

@byan, thanks for the clarifications. then I may have had both wrong.
but.If I remember correctly the qs of GPOs. it also says you need to ensure GPO1 applies everywhere. so only way is enforcing it.
--
I also believe this dump's answers doesn't include ADDS as a requirement for WDS. but it IS (DHCP+DNS+ADDS). and I answered it so in the exam.

i passed this exam with 760 marks 1 week before today but forget to write here.i think there are too many wrong answers in thix dump but still enough to pass it so do hardwork & try to understand the material not just memorize it.but thanx to GOD i have done it

@ssuper2k Microsoft isn't really clear on the documentation for send-smigserverdata and receive. Perform this in a lab. Send must be issued first.

As for the Link, you want to delete the link first, and then create a bridge, you need to auth to the main site first.

Also I caught another one on DHCP Filters vs Policy. Filter just filter out and would require MAC's from everyone (not least amount of admin effort) I need to scope out laptops, use WMI query inside of Scope Policies, I say correct is dhcp policies and not filters.

also question about GPO1 to enforce. I believe answer should be link gpo1 to ou. They want the best answer. If I enforce GPO1 every other ou that would have block inheritance would have the enforced GPO1, not the best answer.
IMHO block inheritance, and then link the GPO1 to the OU1

Cheers

-Bryan
MCSE 2003-2012

Thank you Karl will try that. =)

Pass today with 880.
I answered all qs as in here, just changin the qs receive b4 send and other create site link brigde instead of deleting link2.

Thanks Esha.

ALHAMDULILLAH Passed with 940 today here in Dubai

Tester,

Saw this on another thread.


Does anyone know how to convert this exam to a vcem format?
I keep getting a "Sorry, only standard exams are supported" error message when I try and upload it to http://upload.avanset.com/ to convert it so that I can use it on my phone.
The vce Converter 1.0.215 cannot convert it either.

Open 2 instances of Exam Designer.In one instance open the dump,
go to Mixed Q, Question-Set1. Mark Question 1 - 71 (!not question Set1 or Testlet1!) click edit + copy.Go to the other instance of Exam Designer, create new exam and paste the Q's in.

You could do the same with the case studys. Just copy the case Study
description text in each question. Only way I know .
Convert dump for mobile - it should work now.

Hi guys I need to open my VCE on my android device it says only standard exams are supported. anyone that can help me ?

100% valid dump in India. Passed the exam with 920.

This dumb still valid. i passed yesterday with 940/1000. Thank Esha so much!

passed 910 26-5-2013
thank you thank you thank you alot
nothing different

Passed today. Valid for Colombia. Few wrong answers.

Passed with 790 / 1000 all Questions from this dump with few wrong answer

Passed 8XX very valid. Thank you Esha!

Q32 : Can someone please explain why we should recommend only one image ?

Passed with 940 / 1000 all Q from this dump with few wrong answer. good luck for all.
الحمد لله رب العالمين

Same as below 940 - Missed two questions

thx alot ,,this dump still valid, passed today with 940 ,all questions from the dump, no new questions,but few wrong answer, still valid,, study this dump which is to much enough to pass for sure inshallah

@Liam
"Please note the answers are mixed up and not in the same order as the dump, so in other words you need to know the answer not the letter or order in the list."

I know that the answers are mixed up and not in the same order as the dump. The questions were really rudimentary. With me on some issues, the structure of the sentence was structured differently.

Still valid - passed with 880 here in the UK.
Please note the answers are mixed up and not in the same order as the dump, so in other words you need to know the answer not the letter or order in the list.

Same questions, 51 in total, two case study with 15 questions in total. Passed with 760, not sure why.

I passed the exam in Germany with 700/1000 today. The questions corresponded to the VCE OFFERED here. The answer, however, were the selfsame partially twisted by sentence structure.
many many many thanks :))))))))))))

Thanks Esha
Passed today with 8XX.

Thanks to ALLAH, passed yesterday with 970 marks. Total 51 Questions. 2 Testlets and 36 Mixed Questions. Not a single question is outside from this dump, 100% valid.

Dump 100 % valid . Scored 790 though .

This Dump is 100% Valid. I did my exam today. This Dump is more than enough to get through the exam. I scored 910/1000.

Thank You so much Esha. The way you have organized questions and answeres are really decent.
Please upload a dump for 70-414 also.

Hi all,

Still valid, passed with 790/1000 on 17/05. Do not rely just on it check the latest ones as well.
Best of luck to everyone.

this exam is valid, well done thanks.

Hi there passed with 820 . Dump valid with answers to help you pass. Thanks Esha

100% valid pass with 880

100% valid. passed with 970. Every question from this dump. thank you up loader.

Passed today with 790, didn't had time to answer 2q btw. Valid!

Still valid in Germany, passed today with 890 points, no new questions.

I took the exam today. I passed with 970.Dump is still valid. All questions are from this vce. Thanks a lot Esha. Also I wanna thank to MSCEDesktop for his corrections.

Q24: Receive-SmigServerData comes before Send-SmigServerData
Q65: Server1 and 2, they are both Conditional Forwarder

passed with 900/1000. valid dump. thanks Esha.

If you want to create access control based on claims and compound authentication, you need to deploy Dynamic Access Control. This requires that you upgrade to Kerberos clients and use the KDC, which support these new authorization types. With Windows Server 2012, you do not have to wait until all the domain controllers and the domain functional level are upgraded to take advantage of new access control options.

http://technet.microsoft.com/en-us/library/hh831747.aspx

Hi again DesktopMCSE,
For Q42:
On Microsoft Technet, it says: "The KDC support for claims, compound authentication, and Kerberos armoring KDC administrative template policy has two settings ( Always provide claims and Fail unarmored authentication requests ) that require Windows Server 2012 domain functional level.

See: http://technet.microsoft.com/en-us/library/understanding-active-directory-functional-levels(v=ws.10).aspx

Hi DesktopMCSE,
I believe you misunderstood the question Testlet1, Q7.
it asks "What should you do on each VPN server?"
It does not ask you what you should do on RADIUS Servers.

Excelent 100% valid from Colombia. passed today with 940.
Muchas gracias

Passed this exam with the score 910/1000. this dump are 100% valid but with few wrong answers. but all Questions from this dump
NO new questions.

100% valid colombia. Just passed the exam. Score 880. Thanks for this

Passed, 850 at HK 13 May 2013

Passed yesterday. German language only 40q (no case studys)
Score 960, changed following q:
1) Q42: Answer B+E - Not necessary to upgrade ALL DCs to Server 2012
2) Q24: Receive-SmigServerData before Send-SmigServerData
3) Q65: Server1+2 Conditional Forwarder
4) Testlet1, Q7: B

Passed this exam with the score 880/1000. Esha's dumps are 100% valid but few wrong answers. Mainly, may be in the simulation/select & place questions. 36 questions and 2 case studies(8Q and 7Q)=Total questions=51. Duration of the exam is 2hrs 10minutes. All the best!! Thanks once again Esha!! Your material is really good!!

Hi Esha, Job well-done, you can make it better if correct all answers and get help from others,,

Just passed the exam. Score 850 All questions and both case study from this dump seems like there are few answers which are wrong in this dump but I am sure it should be fine for passing the exam

Just passed the exam. Score 880. Thanks for this

Hi Guys, Please provide the correct answer for the below question.

You implement and authorize the new DHCP servers. You import the server configurations and the scope configurations from PA1 and AM1.

You need to ensure that clients can obtain DHCP address assignments after you shut down PA1 and AMI.

The solution must meet the technical requirements.
What should you do?

A. Run the Get-DhcpServerv4Lease cmdlet and the Remove-DhcpServerv4Lease cmdlet. Run the Windows Server Migration Tools.

B. Run the Get-DhcpServerv4Lease cmdlet and the Add-DhcpServerv4Lease cmdlet. Activate the scopes.

C. Run the Get-DhcpServerv4FreeIPAddress cmdlet and the Invoke-DhcpServerv4FailoverReplication cmdlet. Activate the scopes.

D. Run the Get-DhcpServerv4FreeIPAddress cmdlet and the Invoke-DhcpServerv4FailoverReplication cmdlet. Run the Windows Server Migration Tools.

passed with 850 using this dump. Thanks

Just now cleared . Just read this . you are sure to pass. passed with 850.

Passed today. Questions 100% valid. Answers not all valid. For those that's still gonna write this study the questions, do your own research on the questions or ask for help here. Thanks for the upload Esha.

Passed today - 880. I didn't make any mistakes so this dump is with a lot of wrong answers. But still good just to pass it.

thz esha
pass today with 910

Thanks Anubis. that's what Iam looking for..

@Chand
Hello,

Your company plans to deploy a remote access solution to meet the following requirements:
1. Ensure that client computers that are connected to the Internet can be managed remotely without requiring that the user log on.
Answer: Direct Access -- http://technet.microsoft.com/library/hh831416

DirectAccess clients establish connectivity to the corporate intranet whenever an Internet connection is available, even if there is no user logged in. This allows IT administrators to manage remote machines for patching and compliance enforcement even when they are not in the office. Some customers see this as the primary benefit to DirectAccess, and choose to keep their existing remote access solution in place for user connectivity, while using DirectAccess just for remote management.
Note: Manage-out support requires ISATAP deployment or management servers with v6 addresses !!!

2. Ensure that client computers that run Windows Vista or earlier can connect remotely.
Answer: L2TP -- http://technet.microsoft.com/en-us/library/cc771298%28v=ws.10%29.aspx

L2TP can only be used with client computers running Windows 2000, Windows XP, or Windows Vista.

3. Ensure that non-domain-joined computers can connect remotely by using TCP port 443.
Answer: SSTP -- http://technet.microsoft.com/en-us/library/cc771298%28v=ws.10%29.aspx

Secure Socket Tunneling Protocol (SSTP) is a new tunneling protocol that uses the HTTPS protocol over TCP port 443 to pass traffic through firewalls and Web proxies that might block PPTP and L2TP/IPsec traffic. SSTP can only be used with client computers running Windows Vista Service Pack 1 (SP1) or Windows Server 2008 or above. By using SSL, SSTP VPN connections provide data confidentiality, data integrity, and data authentication.

Hi Guys,

Please clear my doubts. so confused with this question.

Your company plans to deploy a remote access solution to meet the following requirements:
- Ensure that client computers that are connected to the Internet can be managed remotely without requiring that the user log on.
- Ensure that client computers that run Windows Vista or earlier can connect remotely.
- Ensure that non-domain-joined computers can connect remotely by using TCP port 443.

Match the above points to the correct one ie.

Direct Access
L2TP VPN
SSTP VPN

Which is right?

This dump is 100% valid. Testlet 2 has two "new" or should I say differently formatted questions which can be answered by understanding AD Recycle bin requirements - mainly having a 2008 server R2 FFL - and AD DC Cloning .

Cheers..

What is the answer of Case study 2 question no. 8?

I just did the exam and got 880, all questions are same as this dump but some answers are wrong here.

Pass today, 800+. Dumps are valid, no new question. Beware some answers sequence are changed.

Thanks all.

Thanks Esha, really appreciate this!

Passed today with 940. All questions from this dump.
Some modifications that I think that are the correct ones:
Q24 - recieive-SmigServerData before Send-SmigServerData
Q5 - create shortcut trusts and not move all of the users
Good Luck!

I took it today in Arizona, USA. Made a 960. Not 5 new new questions, but 5 questions with rearranged answers.

passed 850 few hours ago. still valid, some of the question are wrong but dump is still valid to pass. thanks you .
and Q24 the answer :recieive-SmigServerData BEFORE Send-SmigServerData

Still valid in Spain, but some wrong answers. I'm sure that I answered every question as in this dump 100% and I had a 850. Take care and think before answer. 85% valid

Passed today in Thailand, still valid. thx everybody..เฉลยผิดบางข้อ

Got 850 here in Canada, I probably made a few mistakes, 90% valid dump, thanks Esha

Valid in Canada passed today with 800 an hour ago...

Passed today 910 in Turkey still valid dump.

Passed today 940 in Egypt still valid dump.

Passed today 800 in Lebanon still valid dump.

.. Switzerland

Passed 880 one hours ago. all questions from this Dump

100% valid. Russia.

Passed this exam today with 850, this file is still vaild

Valid in Mexico, Passed last Friday 26. Thanks

Valid in Egypt Thanks God

Can any kind soul please explain Q34? I don't get the dump explanation.
Why exactly is it 5 sites and 3 site links? My answer would have been 4 site links, but that is not an option .. thanks

I forgot:

6) Q4, D: Deploy UAG to CONTOSO.com

Very valid dump. Applied some changes and passed 970.
If you're from germany do the exam in german language.
I had no case studies at all - it seems the translation is not yet validated :)
Same thing happened to me with -416

Passed in 1 hour ago with 910. 8+8 in 2 testlet and 36 mix questions, no new question. This Dump still valid
Thanks Esha !

Passed today in Spain. Still valid

Valid in Soviet Union
Passed with 760 in few minutes fast. No new question. 8+8 in 2 teslets,36 mixed questions
Thanks esha!

Valid Passed with 870

Passed in half an hour ago..880. Thanks Esha.

1) Q42: Answer B+E - Not necessary to upgrade ALL DCs to Server 2012
2) Testlet1, Q12: C (best answer) Run Get-DHCPServerv4freeLease and
invoke-DHCPServerv4FailoverReplication cmdlet. Activate the scopes.
3) Q24: Receive-SmigServerData before Send-SmigServerData
4) Q65: Server1+2 Conditional Forwarder
5) Testlet1, Q7: B (Add a Radius Client) On the Radius Servers the
VPN-Servers need to be added as Radius Clients as a prerequisite
for passing authentication.

Valid - passed with 870

I Passed today 910

Still valid. I passed today!

Still valid. I passed today! Thanks Esha!

Valid Dump.Passed with 910.

Passed today in israel 940, Thanks to Esha.
In the mixed questions :
1. Receive-SmigServerData BEFORE Send-SmigServerData.

Question 8 on case study B has all the answer marked incorrectly.

Still valid in SG. No new question. Pass with 880. Thanks

Still valid in US - no new questions.

Passed with 910, no new questions. Still some wrong answers in this dump, but not many.

passed with 910 on 19-Apr-2013.
All the question from this dump.

Passed today. Got 970

Valid ,Passed today ......from Egypt

%100 valid, passed score 910..

not applicable to case study based exams..
:(( :((
where is the Q ???

Dump is %100 valid but some of the answers are wrong. passed 760

For the germans: First 63q have been validated by Maik and are up on C***base

Testing Monday in US - will advise.

Passed today in Germany with 940 score - no new questions

still valid, passed today with 910

Passed today, all the questions from this dump, Good luck

Thanks a lot!
This Exam is still valid in Germany. Passed today with 940 :-)

passed today 820, in Taiwan
This dumb still 100% valid . no more new questions

@VT - Congrats! Where are you located?

Today (17.04.2013) passed. No new questions. Still Valid.

Done with 910 this dump is vaaaaalid. thanx Esha

Valid in Brazil!

passed today 790 thanks

This dumb 100/100 valid . no more new questions right now
Thanks God .
i passed today with 880 score
the exam came as follow
2 testlet with 8Q for each case study , the same 2 testlet in this dumb
and 38 question all from mixquestions inside this dumb
good luck to every body
thanks Esha

This dump is 100% valid..Just Passed with 850...Glory B 2 Jah..n big tnx 2 all d exam collection crew..

Passed yesterday with 970. Still valid.

@NOS

Thanks Alot now i got it i got lil confused coz of lots of things were goin in mind :) But anyway Thanks alot for your help :).

Khizer,

This is a simple understanding or replication. In both scenarios you need replication to go through site 1. Draw the 3 sites in circles in a triangle pattern, then connect them with the site links.

On question 26 the best answer to force the replication through Site one is deleting Link 2.

In the other question, this answer is not available. So the best answer is to modify the cost of Link 2, making the other route the more desirable one forcing it through Site 1.

Hi Esha i have confusion in these two questions please help me sorting it out. Please answer me ASAP coz its very Urgent.


QUESTION 26
A. Delete Link2.
B. Create one SMTP site link between Site1 and Site3. Create one SMTP site link between Site1 and Site2.
C. Create one site link bridge.
D. Delete Link1.
Correct Answer: A
Section: [none]
Explanation
Explanation/Reference:

=============================

A. Delete Link3.
B. Create one SMTP site link between Site1 and Site3. Create one SMTP site link between Site1 and Site2.
C. Create one site link bridge.
D. Modify the cost of Link2.
Correct Answer: D
Section: [none]
Explanation
Explanation/Reference:

pass with 910 i didn't see any new question exam was so easy and boring

I've just made the test and passed with 9xx!

Follow Esha guys! Thanks Esha!