Pass Your Microsoft 70-410 Exam Easy!

Your network contains an Active Directory domain named contoso.com. The domain contains a single locationnamed Site1. The domain contains a server named Server1 that has the DHCP Server server role installed. Allclient computers receive their IPv4 configurations dynamically. The domain will expand to include a secondlocation named Site2. A server named Server2 will be deployed to Site2. Site1 and Site2 will connect to eachother by using a WAN link. You need to ensure that the clients in both sites receive their IPv4 configurationsfrom Server1.

Is the answer not?
Server1: Create a New Scope
Server2: Install the Remote Access server rols, Add a routing protocol

http://support.microsoft.com/kb/232703
http://technet.microsoft.com/en-us/library/cc782859%28v=ws.10%29.aspx

Just cleared with 850.
One question was
Your network contains 2 AD forests named contoso.com and adatum.com. both forests contain mutiple domains. A tw0-way trust exists between forests. The adatum.com domain contains a domain local security group named group1. Group1 contains adatumuser1 and contosouser1. You need to ensure that group1 can only contain users from adatum.com domain. Which three actions should you perform?

In most of the exams dumps
It is remove adatum/user1

If u see it closely it says group1 only contains users from adatum.com so the first step is to remove contoso/user1

Thought it might be helpful

VALID in Egypt , Passed with " 865 " today ! thanks for nofenofe , ROD and Snowden

Congrats Egyptiany :)
3o'bal ya rab 411-412
and keeep going :D

Are you sure about this dump because it is differ in Size from the orginal one uploaded in this site .

waiting for your repaly bro :)

Considering I have the exam tomorrow, I have only managed to study half of the snowden dump and all of Rods latest dump (I should of just studied the snowden one from the outset I think) is it worth still going for it or should I reschedule?

pass today 8xx :)

all Q from
https://www.dropbox.com/s/i5pj360n8199onp/70-410-ScottCha-All-Questions-Working-338q.vce

this dump valid 100%.just need to compare some Q in this dump with Snowden dump and then i promise you will pass.

This dump is not valid anymore, failed today.

Exam Q229.
I think the answer should be:
B. Server Manager
H. New-StoragePool

http://www.petri.co.il/create-storage-pool-on-windows-server-2012.htm#

Are these questions actually on the exam or just practice? As i have the William Panek mcsa 2012 complete study guide i have read and these questions seem much harder

@josh, unfortunately I dont have any "sure" answers, what I am doing is just extracting the questions from snowden (which you can study and are completely safe to be accurate) and creating a new dump with only the new questions (which should be around 180). that so you know which ones you need to be careful with, I haven started studying the dumps, I am hitting the book, trainsignal and cbt nuggets real hard at the moment, will start with the dumps by next week.

@ROD I am taking the exam tomorrow morning can you please send me the ones which you are sure that are true. I will appreciate that. kaldataforum@abv.bg

Ok, until we find a dump that has all good answers, I will do what needs to be done, I am in the process of removing all questions that are in both snowden and scottcha, and will create a dump with only the new questions after the update, so we can start working on correcting those ones only, and studying the rest from snowden. I hope to finish it by tomorrow.

Your network contains an active directory domain named Contoso.com.
The domain contains 100 user accounts that reside in an organizational unit (OU) named OU1.
You need to ensure that user named user1 can link and unlink Group Policy Objects(GPOs) to OU1.
The solution must minimize the number of permissions assigned to user1.
What should you do?

Run the Delegation of Control Wizard on the Policies containers
Run the Set-GPPermission cmdlet
Run the Delegation of Control Wizard on OU1 (Correct Ans)
Modify the permission on the user1 account

Modify the permissions on OU1. (Correct Ans)
Run the Set-GPPermission cmdlet.
Add User1 to the Group Policy Creator Owners group.
Modify the permissions on the User1 account.

Run the Set-GPPermission cmdlet. (Correct Ans)
Run the Delegation of Control Wizard on OU1
Modify the permissions on the Contoso.comSYSVOLContoso.comPolicies folder
Add User1 to the Group Policy Creator Owners group.

@ ScottCha ,

Jackc from France under the topic Microsoft.Exactquestions.70 - 410.v2013 - 10 - 01.by.Anna.336q the correct answers of the Snowden noted. Might be useful to also process if it is not already done it.

He writes the following:

This is my checks (with Snowden Dump) :

Q45 good answer : Clean install on new h / clean install on Replace existing h / upgrade
Q60 good answer : remove Adatum / convert universal group / convert global group (ref Snowden Q237 )
Q61 good answer C
Q63 good answer D (ref Snowden Q70 )
Q82 good answer : IPV4 General (ref Snowden Q92 )
Q90 good answer D
Q95 good answer B (ref Snowden Q115 )
Q99 good answer B E
Q111 A good answer (ref Snowden Q231 )
Q116 good answer D (ref Snowden Q36 )
Q136 good answer D (ref Snowden Q77 )
Q137 good answer D (ref Snowden Q75 )
Q150 good answer D (ref Snowden Q64 )
Q155 A good answer (ref Snowden Q55 )
Q167 good answer C (ref Snowden Q42 )
Q171 good answer : Enable Option 60 PXEClient / Enable the Do not listen on ports DHCP . (ref Snowden Q33 )
Q173 good answer B (ref Snowden Q31 )
Q174 A good answer (ref Snowden Q228 )
Q193 good answer C (ref Snowden Q234 )
Q206 good answer B (ref Snowden Q231 )
Q208 good answer C (ref Snowden Q30 )
Q217 good answer D
Q224 good answer D (ref Snowden Q25 )
Q246 A good answer (ref Snowden Q236 )
Q334 A good answer

Hello Suko can you point out the questions it would be nice :D and congrats ;)

@
maybe during converting the .pdf to .vce , these wrong answers happened ?
did you check all the answers with pdf ?

Hi Suko. Glad you passed. I'd be happy to correct any questions that you can point out are answered incorrectly.

Hi ScottCha. I passed the exam this morning with only 715. 48 questions from your last dump passguide 338q, and 2 new questions. The problem are the answers, be carefull with that and check your doubts with technet, mainly in Hot Area, Drag and Drop and Point and Shot, there are many questions in the exam of that areas, and a lot of wrong answers in your dump.
thanks you very much for everything.

@ Mohamed
toy mean if i just memorize the answers, i will fail ? could you tell us how amny questions with wrong answers scotcha's dump has ?

You deploy a Server with a GUI installation of Windows Server 2012 Datacenter. From Windows PowerShell, you run the following command: Remove-WindowsFeature ServerGui-Shell. In the table below, identify which tools are available on Server1 and which tools are unavailable on Server1.

Make only one selection in each row. Each correct selection is worth one point.

File Explorer
Internet Explorer 10
Microsoft management console MMC
Server manager


What is available and what is not ?

You have two servers that run Windows Server 2012. The servers are configured as shown in the following table.

Server1
Domain or workgroup: consotos.com
Network profile : Domain

Server2
Domain or workgroup: Workgroup
Network profile : Public

You need to ensure that Server2 can be managed by using Server Manager from Server1. In the table below, identify which actions must be performed on Server1 and Server2. Make only one selection in each row. Each correct selection is worth one point.


Server1:
1. Modify the trustedhosts list
2. Set the network profile to private
3. Override the user account UAC restrictions by using the Localaccounttoketfilterpolicy registry entry

Server2:
1. Modify the trustedhosts list
2. Set the network profile to private
3. Override the user account UAC restrictions by using the Localaccounttoketfilterpolicy registry entry

What is the right answer

You have a Hyper-V host named Server1 that runs Windows Server 2008 R2. All of the virtual machines on Server1 use VHDs. You install the Hyper-V server role on a server named Server2 that runs Windows Server 2012. Server2 has the same hardware configurations as Server1. You plan to migrate the Hyper-V host from Server1 to Server2 by using the Windows Server Migration Tools. In the table below, identify what can be migrated by using the Windows Server Migration Tools.

Make only one selection in each row. Each correct selection is worth one point.


What can be managed :
1. Virtual machine configurations
2. Hyper-v setting
3. VHD files that attached to a virtual machine
4. Floppy disk

Your network contains an Active Directory domain named contoso.com. The domain contains a single location named Site1. The domain contains a server named Server1 that has the DHCP Server server role installed. All client computers receive their IPv4 configurations dynamically. The domain will expand to include a second location named Site2. A server named Server2 will be deployed to Site2. Site1 and Site2 will connect to each other by using a WAN link. You need to ensure that the clients in both sites receive their IPv4 configurations from Server1.

In the table below, identify which actions must be performed on each server.

Make only one selection in each row. Each correct selection is worth one point.

Server1 ; Create a new scope - Add a routing protocol - Install the remote access server role
Server2 ; Create a new scope - Add a routing protocol - Install the remote access server role

Any idea about the answer is ?

Your network contains two Active Directory forests named contoso.com and adatum.com.
A two-way forest trust exists between the forests.

You have custom starter Group Policy objects (GPOs) defined in contoso.com. You need to ensure that the same set of custom starter GPOs are available in adatum.com.

In the table below, identify which action must be performed for the starter GPOs container in each forest.

Make only one selection in each of the rows. Each correct selection is worth one point.

contoso.com copy - back up - paste - restore from backup - import setting
adatum.com copy - back up - paste - restore from backup - import setting

Any idea what the answer is ?

@Scotcha
100 % valid pass today >>>>>>>>>>> but there is many false answe take car
all question from Scotcha passguide
thanks alot Scotcha

@Scotcha failed your dump is 50% and new questions are 3-50%

@juna if you have the visual cert exam designer you can simply open it with it, and print it to a pdf printer and make your own pdf of any exam.

thanks, that worked

Try it again. You might have caught it in the middle of the upload.

I just tested it and it worked for me.

https://www.dropbox.com/s/i5pj360n8199onp/70-410-ScottCha-All-Questions-Working-338q.vce

the dropbox link isn't working :(

I also did upload my exam. Let's see if any get published. I uploaded it before the corrections below were made. Please be aware of this.

@Pablo.thanks. Correction made. Also on the Hot Spot areas 3 of the questions did not have answers. (4, 9, 15). I fixed those as well and have put them on the DropBox link.

4. No, No, Yes
9. All are Server 2
15. NIC2, NIC3

@scottcha Thanks for your great work!!!!
In the question Exam C Q23 the right answer should be D ( RID Master). Your explain is good but not the letter choice.

I just uploaded @scottcha´s dump here, lets see if it gets published. All credits to @scottcha, all I did was uploading it. (not sure if he did)

@scottcha thanks so much. quick question, did you notice any different answers oppossed to the old 336q vces? I havent had a chance to check old vces since I am studying the book and the cbt nuggets. can someone compare to earlier dumps?

@scottCha Thank you for quick support! Yes I will do that

Here is the link to the latest from passguide.

https://www.dropbox.com/s/i5pj360n8199onp/70-410-ScottCha-All-Questions-Working-338q.vce

Again, I have not personally verified the answers, however, this is what I will be studying from.

If you see any corrections please let me know and I'll update as long as I can verify them.

Hopefully they'll post this test when I upload it.

@scottcha Thank you very much. could you please upload new dump asap?
I am goint to test tomorrow morning. Let you know about result!

@scottcha, thanks so much for all your efforts. we appreciate it a lot.

@Scottcha THANKS im taking the exam next week this will be crucial because i have done your previous dumps just going through the important sections in the book but the new questions will.be very helpful

Ok. Pulling down the latest passguide file and will get it converted and uploaded ASAP. I'll upload it here and also create a DropBox link.

New-StorageSubsytemVirtuakDisk

Anybody know what is that ?

If everyones complaining then read the bloody book hes doing us a great favour which you muppets arent appreciating!!!

Event passguide PDF are full of wrong answers.

@scottcha they have updated the current questions from 231 to 338 i believe these questions are going to be similar to your previous upload (roberts pdf)
I would be very gratefull to you if you could upload it so i can doublecheck it
you have contributed a great deal and i respect it a lot!!!

@scottcha , try to get the update from passguide i see that they update them

@scottcha, looks like they have updated their exam in passguide. since you just bought it, they should let you get the updated one. can you check that?

Passed the exam today. Just use scotcha's dump and snowden's. Keep in mind te verify the answers to questions. Not all of them are correct

@ ScottCha
thanks , are you know that passguide is upload 338 Q in 15/10/2013 are any one get them ?

@Mohamed .as I stated earlier.I did not verify the answers. I worked all day putting this .VCE together and don't feel it's my responsibility to research each and every question.

How about you take on that task and report back your findings? I'll then make corrections if I feel they are accurate.

Exam Q334.
I think the answer should be:
A. ReFS

Thank you ScottCha for sharing your dump, you're a good man.! hope this dump was our key to pass the exam.any one can try it?? becoz im still on my ccna and this is my next step.

@ ScottCha

Exam c Q35.
I think the answer should be:
C. The WMI filter for GP1.

@ ScottCha
are you sure from the answe in this dump (231 q )
thanks man

@ ScottCha Thanks i donwload the VCE file from dropbox and it works fine.

Ok. Good copy uploaded and tested.

@RandySavage, this is the security configuration and analysis tool. you import the inf file and compare it to the local database. If you want this template applied you just select configure the computer and the policy is set.

Can anyone confirm the following:

Your network contains an Active Directory domain named contoso.com. The domain contains two servers
named Server1 and Server2 that run Windows Server 2012.
You create a security template named Template1 by using the Security Templates snap-in.
You need to App1y Template1 to Server2.
Which tool should you use?

A. System Configuration
B. Local Security Policy
C. Certificate Templates
D. Computer Management

I'm reading people saying the answer is A but I fail to see how.

I sat the exam today after studying this and snowden dump. There were about 5 new questions. I had more questions from this dump than the snowden. The last 100 questions of this dump came up more than any others, unfortunately the last 100 or so questions answers are questionable. Recommend studying those two and use technet to try and verify answers.

Hi ScottCha, bad news, I've written today, and only about 20 questions came out of the passguide dump, most of the others came out of nofenofe and Aamed's dump. There were two also brand new questions which I've haven't came acros, also the wording has changed a lot, making it even more confusing.

I just realized it is corrupted. I'll upload a new one in the morning. Sorry about that.

No, I don't know how accurate the questions are. I downloaded the latest dump from Learn2Pass. If you see corrections please note them with documentation and I'll make adjustments.

@ ScottCha
could you tell us how accurate are the answers of your dump ?
in addition your new uploaded dump is not waorking.

@ ScottCha I donwload the file from dropbox File is Invalid file format or corrupted file

Please can you upload a new one @ dropbox I really need it
thanks in advance

@ScottCha the file uploaded on dropbox is not able to open. re-upload?

Hi guys, hope everything going well.
try the bellow dump its with some updated questions and correct answers.
Microsoft.Actualcerts.70-410.v2013-10-11.by.aahmedki.299q.vce

Sorry about that. Didn't know you had to re-share after putting a new file up there.

https://www.dropbox.com/s/zuaxqqkfiepuvsy/70-410-ScottCha-All-Questions-Working-231q.vce

@ScottCha the file uploaded on dropbox is not able to open. re-upload?

Passed this morning 730/1000, this is valid dump in Italy. Total 50 questions and ALL from this dump as well as Swoden Dump. The problem is . questions are valid . answer not! So verify every single question in a Lab environment if you can.

I have corrected Q14 in Point and Shoot. I will be uploading the file to DropBox after I make a few more cosmetic corrections. Keep the correct answers coming.

Thanks guys!!!

I don't know about the IPv6 questions. This is the latest dump from passguide. I haven't verified answers, I spent the time getting all of the questions formatted and working properly.

I've seen a few comments where people have said they didn't have any IPv6 questions on the exam.

@MHX, General is indeed the correct answer. Keep in mind that not all answers in the dump are correct. You can use snowden's dump and technet to correct them

Thanks ScottCha you the man.

Seems a bit odd though that there a lot of questions that are in the newer dumps that are not in here and no IPV6 questions which people say they have been getting.

Thank you ScottCha! How is ScottCha`dump. Valid? I am going to test this Sat.
Please let me know T.T

@ ScottCha's dump, Q14 of the point and shoot question.

You have a server named Server1. Server1 runs Windows Server 2012.

Server1 has two network adapters and is located in a perimeter network. You need to install a DHCP Relay Agent on Server1.

Which node should you use to add the DHCP Relay Agent? To answer, select the appropriate node in the answer area.

Snowden's answer was General, and this dumps is Static Routes. Was that a mistake ScottCha?

Snowden's answer is pretty thorough.

To configure the IPv4 DHCP relay agent
1. In the Routing and Remote Access MMC snap-in, expand IPv4, right-click General, and then click New Routing Protocol.
2. In the New Routing Protocol dialog box, select DHCPv4 Relay Agent, and then click OK.
3. In the navigation pane, right-click DHCPv4 Relay Agent, and then click New Interface.
4. Add the network interfaces on which the server might receive DHCPv4 requests that you want to send to the DHCP server. Right-click DHCPv4 Relay Agent, click New Interface, select the appropriate network interface, and then click OK.
5. In the DHCP Relay Properties dialog box, select Relay DHCP packets, and then click OK.
6. In the navigation pane, right-click DHCP Relay Agent, and then click Properties.
7. On the General tab, enter the IPv4 address of the DHCP servers that you want to provide DHCP services for the RRAS server's clients, click Add, and then click OK.

http://technet.microsoft.com/en-us/library/dd469685.aspx

Thanks ScottCha,

I am taking the test on Thursday, so will report back in your new exam thread when it pops up.

Thank you very much ScottCha

Thanks so much Scottcha, please anyone as soon as you do the exam and test this VCE let us know how it goes. please post # of new questions and score obtained.

Ok. I put my file out on DropBox:

https://www.dropbox.com/s/zuaxqqkfiepuvsy/70-410-ScottCha-All-Questions-Working-231q.vce

I worked very hard on this and all of the questions are working correctly.

If this file is useful please come back and vote for it and leave constructive comments.

ScottCha, you can use Dropbox for example. It´s free and easy. Thanks

@sventek, most of the questions will be asked from this dump and from snowden dump, what I have read over here. Most questions from Snowden are correct. From this dump multiple questions are wrong. You can use snowden's dump to compare with this dump and use TechNet.

@sventek, sorry have no gtalk and/or facebook

Hi ScottCha, we are waiting, thank you, its much appreciated.

@Eric can you give me ur GTalk or Facebook ?

Need to ask you something

Thanks

I'll be happy to, however, I have never used and upload center before. Can you guys recommend one that is easy to use? Once I load it there please come back to my new upload here and post your comments and votes. Thanks.

ScottCha, i'm with Mike. Let we know if passguide is good. I´ll take the exam in 1 week. In 8 days you can see my feedback.

ScottCha please let us know if passguide questions were correct.
Thanks

Ok. Just bought and formatted the latest passguide exam for 70-410. I am taking this test in 2 weeks and needed some assurance I have the best chance possible in passing. I've had good experience with passguide and hope the answers are correct. Look for the test in the next day or so. It has 231 questions.

Your network contains an Active Directory domain named contoso.com.

You have a Group Policy object (GPO) named GPO1 that contains several user settings. GPO1 is linked to an organizational unit (OU) named OU1.

The help desk reports that GPO1App1ies to only some of the users in OU1.

When you open Group policy management you see the following
-policy applies to authenticated users
-On OU1 blocked inheritance is enabled
-This it the only gpo applied in the OU

Options:
A.Modify the Security settings of GPO1.
B.Disable Block Inheritance on OU1.
C.Modify the GPO status of GPO1.
D.Enforce GPO1.

Answer in dump is A. But on authenticated users the policy is applied. So I don't think you need to change the security settings

What do you what the answer should be?

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012. You create a security template named Template1 by using the Security Templates snap-in.

You need to App1y Template1 to Server2.

Which tool should you use?
Options:
A.Local Security Policy
B.Server Manager
C.Authorization Manager
D.Security Templates

Answer in dump: B
I would say A: you can import the .inf into the local security policy of server2

this dump has current question.just need correction of answers.wrote yesterday

Lot of dumps flooding the page without a single comment from author it self. Which dump has most accurate questions? So we can correct it and upload single dump people can rely on.

You need contains an Active directory domain named contoso.com .The domain contains server named server1.
You need to create 3TB VHD on server1?
Computer management>disk management

Other you can use is Disk part. So if you see a similar question with that option, you can choose that one

You need to create four external virtual switchs in Hyper-V. I would say Remove-NetlbfoTeam. First remove the teaming in order to create 4 external switches

You need contains an Active directory domain named contoso.com .The domain contains server named server1.
You need to create 3TB VHD on server1?
A. Diskpart
B.Share and storage management
C.Computer Management
D.New-VirtualDisk
E.Server Manager

Im so confuse for this question.
Plz help me confirm it.
thanks

You need to create four external virtual switchs in Hyper-V
A.Remove-NetlbfoTeam
B.Add-VMnetworkadapter
C.Add-NetlbfoteamNic
D.Set-Netadapter
My answer : C.Add-NetlbfoteamNic

Anyone confirm?
thanks

@ ROD - Did you happen to create a VCE with Snowden's answers, and the new answers from this one?

Or are you able to let us know what ones are the new ones from this one, and I will create a VCE with the correct answers?

Thanks!!

Passed today with 715 using this vce.

@coment, I know that answer is correct also. But if you use the Local group policy editor, you can under computer configuration>windows settings>security settings>local policies>user rights assignment you can add the user to the "restore files and directories" policy

@eric A. Just insert the user on Backup Operators Group.

You have a file server named Server1 that runs Windows Server 2012.

You need to ensure that a user named User1 can use Windows Server Backup to create a complete backup of Server1.

What should you configure?
A. The local groups by using Computer Management
B. A task by using Authorization Manager
C. The User Rights Assignment by using the Local Group Policy Editor
D. The Role Assignment by using Authorization Manager
Answer: A,
I would also say that C is possible
What do you think?

Guys what you need to do is download snowden and this one, use all snowden q&a and just add whatever new ones are in this one. This one has wrong answers which are correct in snowden´s.

Everyone look at this:
http://www.passguide.com/70-410.html

70-410 Questions & Answers

Exam Code: 70-410

Exam Name: Installing and Configuring Windows Server 2012 Exam

Updated: Oct 5, 2013

Q & A: 231 Q&As

Less questions, but usually lead 2 pass is vert trustful, can someone verify about this?

@conghuong91 :

nickname yahoo : hungthanhle85

available now 9am gmt +7

@aahmed

can we discuss by this dump? maybe yahoo messenger or mail.etc
I think u can help me and everybody that following this dump .
great.

thanks

@ aahmed can you be so kind to post your version with the corrected answers from Snowden's dump?

@ aahmed i m mohamed frm srilanka. can i have ur mobile no or emai id

@ Havana Le from Vietnam

Ok, so i got this one answered for me today.

You can't choose the RAID because one of those disks is basic.
The disks must be dynamic

Hi guys,

So - are the snowden questions the ones that this dump that are incorrect?

Does anyone know what questions in this one that are not in the snowden dump?

There is one question about compacting a vhdx while the virtual machine is running.
I tried that and you can't do that.

You need to ensure that you can enable NTFS disk quotas for volume D.
What should you do first?
A. Install the File Server Resource Manager role service.
B. Format volume D.
C. Run the convert.exe command.
D. Convert the disk to a dynamic disk.

C works too. And does not delete anything.

Passed the Exam. 100% Valid Questions . but make sure to verify the answers.
use Snowden.429q to verify the similar questions.

I failed the exam. same questions but wrong answer. we need to find corected answers for the dumps.

I passed the exam yesterday. 715

total 50 questions. I think 47-48 from this dump, but in this dumps there many wrong answers.

Good luck!

@McJohn:
This dump has many questions with wrong answer.i take exam on tomorrow , Can u show another questions of this dump error for all?
thanks for ur answer. :)

@ Havana Le from Vietnam
disk question: none of them is correct,
the correct answer shall be disk 2 and 3 mirrored.
not A, coz Raid-5 can only created on dynamic disks(check ou the Exib, there is a basic disk I remamber)
not B, coz storage pool provides no fault tolerance.
not C or D, coz more than 2TB should be GTP not MBR.
the right answer is mirrored 2 and 3 volume.
I think it is a typo.
Good luck.

You need to creat volume that can store up to 3TB of user files.The solution must ensure that the user file are available if one of the disks in volume fails :
What should you create?
1.A Raid-5 volume on disk 1, disk 2, disk 3
2.A storage pool on disk 2, disk 3
3.A mirrored volume on disk 1, disk 4
4.A mirrored volume on disk 1, disk 3

My answer:
A Raid-5 volume on disk 1, disk 2, disk 3

help?

thanks

@McJohn

Thank so much :)

@ Havana Le from Vietnam
Remote Desktop or Network Setting?
I can tell you that the first thing you should configure it network config.
Coz without network config, you can do nothing.

@ Havana Le from Vietnam
group question shall be 1,5,3.
1, because adatumuser1 shouldn't be in the group.
5 then 3, because you cannot turn local security group into global group directly, but to turn it into universal group then global group.
Check it out:
http://technet.microsoft.com/en-us/library/cc755692(v=ws.10).aspx

Hi everybody passed today 760 used:
1. Microsoft.PracticeTest.70-410.v2013-06-29.by.Snowden.429q (small number of errors)
2. Microsoft.Yesuse.70-410.v2013-09-23.by.nofenofe.336q (large number of errors)
3. Microsoft.Exactquestions.70-410.v2013-10-01.by.Anna.336q.vce (large number of errors)
4. All questions new and old was from the top three vce's

@Eric
thanks

@coment, I still think this the answer for the trust question is B. on the other hand I don''t thinkthey will aks this question, because this 70-410 doesn't deal with trusts

@havana, the group question: 1,5,3

@Vera and @McJohn
• Domain/Workgroup
• Computer Name
• Remote Desktop
• Network Settings
Which of best?Remote Desktop is the best choice???
thanks

Your network contains two AD forests named adatum.com vs contoso.com . Both forests contail multiple domain.a two-way trust exits between the forest.
The contoso.com domain contains a domain local security group named group 1.Group 1 contains contosouser1 and adatumuser1 .
You need to ensure that Group1 can only contain users from contoso.com domain.
Which three actions should you perform ?

1.Remove adatumuser1 from group1
2.Convert Group 1 to a distribution group
3.Convert Group 1 to a global group
4.Remove contosouser1 from group1
5.Convert group 1 to a universal group

Help me ?
My answer :
Remove contosouser1 from group1
Remove adatumuser1 from group1
Convert Group 1 to a distribution group

thanks

thanks @erik.

A one-way external trust exists between contoso.com and adatum.com.
Adatum.com contains a universal group named Group1.
You need to prevent Group1 from being used to provide access to the resources in
contoso.com.
What should you do?
A. Modify the Managed By settings of Group1.
B. Modify the Allowed to Authenticate permissions in adatum.com.
C. Change the type of Group1 to distribution.
D. Modify the name of Group1.

it could be B if the option was Allowed to Authenticate permissions in contoso.com.
Then C?

@coment, B is correct. With File Server Resource Manager you can manage disk quota and folder usage. If you don't need that you can do a SMB - quick. With SMB - advanced you can configure quota and folder usage, but you that role than.

@ McJohn from Japan

Ok, that makes sense. I guess i should have read the question as "what should you do first" and not as "what should you use".

Thank you for answering!!

You need to ensure that you can use SMB Share - Advanced to create the new share.
What should you do on Server1 before you run the New Share Wizard?
A. Run the Set-SmbSharecmdlet.
B. Install the File Server Resource Manager role service.
C. Configure Dynamic Access Control and App1y a central access policy.
D. Configure the Advanced system settings.

B?

@Vera from Portugal
Before you manage another computer by Remote Manger,
the first thing you should do is to enable the target computer's network
and set IP config.
Check the exhib,
see there's nothing in the network settings.

Q114 - How can you manage a newly installed server 2012 core from another server 2012 with computer manager?

• Domain/Workgroup
• Computer Name
• Remote Desktop
• Network Settings

The answer says Network Settings but there's no justification. I tried to do some research but couldn't find much. If i was answering this i would say Remote Desktop. Anyone has a justification for this?

@ Lugo Thanks! I just had to be sure.

Also, on Question 109 the answer box doesn't match the question right? (Another typo of sorts)

@conghuong91: contact me with yahoo tinhanh_bienca20. My English not good :D

Passed. All Qs from here. Lots of wrong answers in this

@tam: I ask for the phone number

Guys,

Everybody are saying wrong answers in the dump.Could anyone send the post he updated answers.So it will be useful for others.

I passed the exam today with just 730 marks, kindly be advised that the dump contains lot of wrong answers and you never know you mite end up at the losing end, Good luck to everyone.

I will go for 70-411

Passed today. vary valid. But many wrong answers.
and about 2~3 new question

Passed yesterday. Dump valid. But many wrong answers.

@Havana Le : contact me with yahoo tinhanh_bienca20. My English not good :D.

Passed today.
Dump is valid, but lots of questions have wrong answers.

Got only 3-4 new questions, but still barely passed. Definitely answers are wrong on this VCE file.

Thanks guys. love you guys

Anyone thinks is B? Because it wants to manage from a mmc that is computer management.

You need to ensure that you can manage Server2 by using the Computer Management
console on Server1. What should you do on Server2?
A. Install Remote Server Administration Tools (RSAT).
B. Install Windows Management Framework.
C. Run sconfig.exe and configure remote management.
D. Run sconfig.exe and configure Remote Server Administration Tools (RSAT).
Answer: C

@Tam : can u show for all details ur exam ?
How much question correct vs incorrect in this dump?
Dump valid %?
thanks

Passed to day in Vietnam. Dump valid.

just passed my exam.questions are 55 are from this dump.Hyper -v & ip-v6 questions are a lot.so u beta polish up on those

Hi guys! ***PLEASE ATTENTION***

All the questions in dumps we face on the exams but we still fail. I think answers are not correct. We find the right answers someway.

Any suggestion about it?

Passed today with 835.
Most of the questions were from this dump except for 3 to 4 questions (or maybe I couldn't remember it).

Some answers were incorrect but it is the best guide you can study from.
Thanks for sharing!

Valid 900 yesterday.

In Italy is valid 910. Some no present answer or inverted answer

@CIO thx. 55 questions and all from this files.

Valid in Russia. All question from this dump

@Pedro from Brazil, I took it yesterday. 52 questions.

Valid

@Pedro from Brazil, the dump is valid, but have many many questions with wrong answer.

@Vera
Yes is a typo should be .ps1

@Leon

When did you test? how long?

Just took the test and 40-45 questions were directly from this file. so I passed.

I need help, this valid for this study? must either make any changes? I need urgent because I can lose his job is not to hold a certification!

Thank you all!

@Randomsonofabitch
You are right, everything checks out, thanks for the correction.

Very valid!!!
I passed today.
All question from this dump, but many wrong answers.

Errrgh.

Q104 -- Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012. The domain contains a server named Server1. You open Review Options in the Active Directory Domain Services Configuration Wizard, and then you click View script. You need to ensure that you can use the script to promote Server1 to a domain controller. Which file extension should you use to save the script?

.pal
.bat
.xml
.cmd

.pal is a typo rigth? it should be .ps1, rigth?

Thanks

@Indigitus
@Lugo
✑
You attach four 500-GB disks to Server1.
You need to configure the storage to meet the following requirements:
Storage for an Application named Application1 must be provided. Application1
requires 20 GB and will require a maximum of 800 GB in three years.
Storage for an Application named Application2 must be provided. Application2
requires 20 GB and will require a maximum of 900 GB in three years.
The solution must provide the ability to dynamically add storage without requiring
configuration changes to the Applications.
The storage must be available if a single disk fails.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A. From File and Storage Services, create virtual disks by using fixed provisioning.
B. From File and Storage Services, create a storage pool that uses all four disks.
C. From Disk Management, create two new mirror volumes that use two disks each.
D. From Disk Management, create a new RAID-5 volume that uses all four disks.
E. From File and Storage Services, create virtual disks by using thin provisioning.

If you want a parity volume, the available space is the number of disks -1. So for 4 x 500GB disks you only have 1500GB available space.
Therefore you cannot assign Fixed disks (800+900 = 1700) and must use Thin provisioning (which WILL let you overprovision).

You would also need to use B as you will need to create a storage pool to be able to create a thin provisioned disk.

Therefore it's B & E in my opinion.

Any one?

Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 and has the Hyper-
V server role installed.
On Server1, you create a virtual machine named VM1.
When you try to add a RemoteFX 3D Video Adapter to VM1, you discover that the option is
unavailable

You need to add the RemoteFX 3D Video Adapter to VM1.
What should you do first?

A. On Server1, install the Media Foundation feature.
B. On Server1, install the Remote Desktop Visualization Host (RD Visualization Host) role
service.
C. On Server1, run the Enable-VMRemoteFxPhysicalVideoAdaptercmdlet.
Microsoft 70-410 : Practice Test
D. On Server1, run the Add-VMRemoteFx3dVideoAdapter cmdlet.

I passed, the questions are valid but not the answers

Hey Team. Just just juuust passed with 745!!! Time to hit 70-411

Okay so I got 3 x IPv6 questions - including that big multiple one where you select the 4 answers.
Whole bunch of that Vm questions including that whole bunch of answers
Whole bunch of Group Policy.where you need to select from that long list of answers.know that also

BUT ALL QUESTIONS FROM THIS DUMP

Much better then Snowden one. Passed yesterday with 850/1000

I am gonna write the exam in the coming 2-3 days, I am studying this dump and trying to figure out the wrong ones, but I still believe the ones with explanations are correct answers.

Passed today 100% valid dump,wrong answers some of them

@Caro, congratulations. All questions and answers from this dump? How many questions In total?

valid in UK - passed today 850 thx

@Joel, all the best for tomorrow. @Bala, You say all questions were from this dump ? How many questions in total on the exam ?

@JP from SA good luck in your exams

@Lugo
Its kind of a trick question because they throw the word "dynamically" in there.
The answer I believe is AB
B- because when you create a storage pool you will use parity (RAID5) and you can add physical disks to it later.
A- Set the maximam VHDs 800 to 900 respectively.

JP good luck. Please do update us

This cant be right.
You have a server named Server1. Server1 runs Windows Server 2012 and has the File
and Storage Services server role installed.
Question No : 98 - (Topic 0)
Question No : 99 - (Topic 0)
Microsoft 70-410 : Practice Test✑
✑
✑
✑
You attach four 500-GB disks to Server1.
You need to configure the storage to meet the following requirements:
Storage for an Application named Application1 must be provided. Application1
requires 20 GB and will require a maximum of 800 GB in three years.
Storage for an Application named Application2 must be provided. Application2
requires 20 GB and will require a maximum of 900 GB in three years.
The solution must provide the ability to dynamically add storage without requiring
configuration changes to the Applications.
The storage must be available if a single disk fails.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A. From File and Storage Services, create virtual disks by using fixed provisioning.
B. From File and Storage Services, create a storage pool that uses all four disks.
C. From Disk Management, create two new mirror volumes that use two disks each.
D. From Disk Management, create a new RAID-5 volume that uses all four disks.
E. From File and Storage Services, create virtual disks by using thin provisioning.

Is gotta be D and E because E confirms "The solution must provide the ability to dynamically add storage without requiring
configuration changes" and D "The storage must be available if a single disk fails.". You can have pools run on parity which provides fault tolerance but it doesnt say that in the question.

I just took the exam and i failed with 630. The Dump is valid but im not sure about the answers. Please recheck again. Alot of questions are on VM, GPO and Storage. Not much on the installation portion

@JP, all the best for tomorrow.
I am writing on Friday on Friday and will also be using this dump.

@JP wishing you all the best. Your update will be appreciated.

Hey guys. I'm writing my 70-410 tomorrow morning at 11:00 AM. Will be writing my exam based on this dump so I shall report back to you all regarding the questions I got. Wish me luck. BTW can anyone tell me what questions in this dump is incorrect? Will be much appreciated.

@Bala, kindly revert back to us with feedback as soon as you done writing. I also need to know how many questions in total you were asked ? Thanks

@McJohn

A little bit of research would get you the answer, which is D.

djoin is an offline join command which requires two steps, first to provision the computer account in the DC, which would create a file, then put this file in the target computer and djoin with that input file.
http://technet.microsoft.com/en-us/library/offline-domain-join-djoin-step-by-step(v=ws.10).aspx

Add-Computer simply adds the current computer to either a domain or workgroup.
http://technet.microsoft.com/en-us/library/hh849798.aspx

@Eric from Netherlands, the" files, I would read it as their own files
lots of ambiguous answers for the questions

@insidious, q84, I also think your answer is correct. What I would like to know, does it matter the order of first conevrting the security goup and than removing the user or removing the user first and than convert the security group?

@Bala please advise if you have the correct answers, any help will really appreciated.

@steve
You have the following options you can choose:
Read the files
Edit the Contents of the files
Delete files created by other users
Modify the permissions on the files
Run executables

So for user1 then just found out:
Read the files
Edit the contents of the files (his own and other users)
Modify the permissions on the files (only on his own files)

User2:
Read the files
Edit the contents of the files (only his own files)
run executable files

So when they talk about "the" files, should I read it as their own files or also other users files?

eric from Netherlands
I think modify permissions should be under the security tab ie NTFS

@ John from Japan
I think answer is D
the djoin.exe command is Offline domain join can use to join a domain without contacting a domain controller. This makes it possible to join computers to a domain in locations where there is no connectivity to a corporate network.
The Add-Computer cmdlet adds the local computer or remote computers to a domain or workgroup, or moves them from one domain to another. It also creates a domain account if the computer is added to the domain without an account need to be online

Someone help me pls.

Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers. The domain controllers are configured as shown in the following table.
You install a new server named Server1 that runs a Server Core Installation of Windows Server 2012. You need to join Server1 to the contoso.com domain. The solution must minimize administrative effort. What should you use?
A. the dsadd.exe command
B. the New-ADComputer cmdlet
C. the djoin.exe command
D. the Add-Computer cmdlet
C or D?What is the difference?
Thank you

Passed today.Valid, but about 20 Questions wrong

This VCE is copy of questions shared in : http://assignment.t15.org/dump.pdf

Some of the answers for this dump are totally wrong. Im going to take the exam tomorrow and i hope i pass.

There is a question: You have a filer server named server1 with win 2012. server1 contains a folder named Folder1
Group name folder permissions share permissions
Group1 read & write full control
Group2 read read
Group3 read & execute change

User 1 is member of group1 and 2
user 2 is member of group 2 and 3

You need to identify the actions ther users can perform when they access the files in the share

Answer in the dump is:
user1: read the files, edit the contents of the files and modify the permissions on the files
user2: read the files and run executable files

I agree with everything but the modify permissions of user1. I tried to do a simulation and check the effective permissions and didn't see any modify permissions

What do you guys think?

I just passed this exam today with 806. Probably 40% of my paper was from this dump. Had 3 or 4 questions on IPv6. Please learn how to create DHCP reservation for v6, routing, subnets (Private,routable, non-routable). GPO rights, print server management.

also you can't use server manager to create VHD,it can only be diskpart or computer management.

If any of you believe you can sure me how?

@miami:your answer is right but you go to remove consto/user from it not adatum/user because only users from consto.com should be in it.

I passed the exam today 880/1000. This is a valid dump but not all answers are correct. Just double check using snowden dump or do some research

@insidious I dont know about this question. I set it up exactly like the screen shots. Only user2 was BLOCKED from control pannel.

@Insidious A Q84:

I think the correct answer is

Convert Group1 to a universal group
Remove adatum]user1 from group1
Convert group1 to a global group

http://social.technet.microsoft.com/Forums/windowsserver/en-US/58543e21-1a66-4844-aba0-d37740e2248b/active-directory-group-scope-local-domain-global-group-universal-group

http://social.technet.microsoft.com/Forums/windowsserver/en-US/fa66b5c5-3ed3-4700-b479-e036577e110b/can-we-add-universal-group-into-global-group

Distributions groups
Distribution groups can be used only with e-mail applications (such as Exchange) to send e-mail to collections of users. Distribution groups are not security-enabled, which means that they cannot be listed in discretionary access control lists (DACLs). If you need a group for controlling access to shared resources, create a security group. (http://technet.microsoft.com/en-us/library/cc781446(v=ws.10).aspx)

@Vera, about the "create a 3 TB VHD".

I think Computer Management is valid too.

And @coment, "share and storage management is a 2008 feature".

https://social.technet.microsoft.com/wiki/contents/articles/13392.known-issues-file-and-storage-services-in-windows-server-2012.aspx
Issue:
In Server Manager, you try to access a File Services-related snap-in (for example the Share and Storage Management snap-in) to manage a down-level computer such as Windows Server 2008 R2. You receive an error message similar to the following:

Failed to start the Share and Storage Management console; no management tools are available. To install the management tools on a server, start the Add Roles and Feature Wizard, and then on the Features page, under Remote Server Administration Tools, select the appropriate tools. Or, on a client computer, download and install Remote Server Administration Tools.

Resolution:
To resolve this issue, you must install the tool that is referenced in the error message on the computer from which you are running Server Manager. For example, to install the Share and Storage Management tool on a Windows Server 2012-based server, use the Add Roles and Feature Wizard, and then on the Select features page, expand Remote Server Administration Tools, Role Administration Tools, File Services Tools, and then select the Share and Storage Management Tool check box.

About "snapshot file location" question.

http://www.globbtv.com/microsite/18/Adjuntos/TR-4004.PDF
Hyper-V VM Storage Live Migration
This feature in Windows Server 2012 enables migrating virtual machine-related files to a different storage
location without the VM having to undergo downtime. It is no longer necessary to take the virtual machine
state offline when migrating to a different storage system.